aPower (Actions on Power) for PBO

[pbodev]

Hello colleagues,

I have recently join moServices , I have installed the latest version amp 12, with the pohd skin on PBO the model is PCMPBO25. Now I am stuck on which setting I need to choose for the aPower (Actions on Power) ?
There is no options for this player

I have notice that the USB led is always on before it would only turn on only if a usbkey or usbdrive would be plugged in, is this also because I need to setup aPower?

Thank you for a great firmware
Nick

[Pokrass]

First of all you can try all variants.

[pbodev]

Hi Pokrass,

I have tried all the variants form the menu and rebooted my PBO. Can it be because the pohd skin?

Thanks again

[FarVoice]

change skin to vrtn and then try any GPIOs via gpio utility. Or get a GPIO map on original FW and compare it with map on vrtn.
To get GPIO map run gpio without patameters:

/usr/local/etc/mos/bin/gpio

For change GPIO run gpio winth parameters:

/usr/local/etc/mos/bin/gpio <port> <value>
where port - a number of port 0-127
value - 0 or 1

[pbodev]

Hi FarVoice,

Thank you for the great tip I don't have the gpl firmware the patriot website doesn't show the player anymore

So I brute forced it I have found that the : gpio 93 is the HDD led
81 is the USB led
44 turn's off the player.
78 send the off command.

I have compared vrtn and the pohd skin. The pohd does not look at the aPower configuration for example if turn off the led ( $gpio 81 0 ) in the start section of aPower there is no changes the led are on even if the firmware detects no HDD or USB are plugged in. So I decided to use the vrtn skin instead. in section drive how can I turn on $gpio 81if I plug a USB stick?

I used the Asus O!Play R1/R3 as an example but the { if ["$ACTION" == 'add']; then $gpio 81 1...} does not work can you give more great tips ?

Thank you so much,
Pbodev

[FarVoice]

And where is GPIOs on LAN and Power LEDs?

gpio 44 0 is power off? Or 1?

[FarVoice]

apower r16 - add Patriot Book Office . Please, test it.

[pbodev]

Hi FarVoice,

I have tested your new version and it works flawlessly I have tested with 2.5" drive and USB key both light up the LED perfectly I have also tested YOUTUBE I wish I had found the moServices before !!!

Thanks again for the help,
PboDev