UrakuS100 (Dayfly HD3548HL-R) нет звука по HDMI

[yuri164]

Сегодня вечером доберусь до плеера еще раз перепроверю чего я туда закинул.

нюню /tmp это в оперативной памяти! после перезагрузки иль выключения - там ничего не останется .

Посмотрю в прошивке разобранной

[Virtual]

глянул ваши дровы для DSP ....
древние что писец . даж многоканальный звук не умеют. (попытка выбрать на них AC3 приводит к краху)

ЗЫ в AMP прошивке покажите

Code: Select all

stopall
09

[yuri164]

Отписываюсь по очереди.
Не знаю почему не получилось скопировать вчера
video_firmware.bin
bluecore.audio
видимо устал
Сегодня, скопировав эти файлы из родной прошивки в \tmp получил такой лог:

| +

~ # stopall
[Found RootApp] pid = 193 ...
[Found dvdplayer] pid = 198 ...
killing DvdPlayer...
killing RootApp...
RootApp AVHDD version...
pli initialization...
remount RO: ...
chip id: 1283: Mars...


>>>>>> Got NAND Flash device!

fw_desc_table_v1->signature=VERONA__
fw_desc_table_v1->version=0x1
fw_desc_table_v1->part_list_len=0xc0
data_buf = 0x10006848
fw_desc_table_v1 = 0x10006848
sizeof(fw_desc_table_v1_t) = 0x20
part_entry = 0x10006868
part_count= 0x4
fw_entry = 0x10006928
FW type, 0x2!
Audio FW found!
Video FW found!
audio_fw_entry->offset = 0x1460000
audio_fw_entry->length = 0x1a14e8
audio_fw_entry->target_addr = 0x81b00000
read len = 0x1a14e8
video_fw_entry->offset = 0x1620000
video_fw_entry->length = 0x239680
video_fw_entry->target_addr = 0x81d80000
read len = 0x239680
remount RW: ...
~ #



~ # cd /usr/local/bin
/usr/local/bin # RootApp -a /tmp/bluecore.audio:0x81b00000 -v /tmp/video_firmware.bin:0x81d80000 ./DvdPlayer
RootApp AVHDD version...
enter 2nd case...
pli initialization...
remount RO: ...
chip id: 1283: Mars...


>>>>>> Got NAND Flash device!

fw_desc_table_v1->signature=VERONA__
fw_desc_table_v1->version=0x1
fw_desc_table_v1->part_list_len=0xc0
data_buf = 0x10006848
fw_desc_table_v1 = 0x10006848
sizeof(fw_desc_table_v1_t) = 0x20
part_entry = 0x10006868
part_count= 0x4
fw_entry = 0x10006928
FW type, 0x2!
Audio FW found!
Video FW found!
Loading audio firmware...
Loading video firmware...
termination code: 0
(null)(0) unkown WEXITSTATUS(status) 1 !!!
remount RW: ...
================================================
================================================
root execute ./DvdPlayer...
================================================
================================================
downloader 0 starts, 0x103aaf38
downloader 1 starts, 0x103ad128
[Dlna DMR] this is GDlnaMediaRendererAP
CMD: mkdir -p /tmp/netb/smb
In my system...
CMD: mkdir -p /tmp/smb
In my system...
CMD: ifconfig > /tmp/netb/samba_my_ip
In my system...
MediaServer.cpp , 433 bind local IP fail !!error = Unknown error 125
file system 2, sector 4294966272
mount to /tmp/hdd/volumes/HDD1
file system 4, sector 262144
mount to na
file system 3, sector 262144
mount to /tmp/hdd/root






WARNING WARNING WARNING m_db_manage_flag_cnt = -1





DB FILENAME = /tmp/ramfs/Setup
Error in pid value: 198, 1321...
WatchDog does not receive signal for 2 seconds, value: 489
[DataObject.cpp 440]DB Develop Version same . Don't be upgrade.
[DataObject.cpp 479]DB Version same . Don't be upgrade.



m_BookMark_Size=4096 m_Signature_Size=16


GrandMa Revision: 11206r6
(User Input)Pipe Created.
(Internal Event)Pipe Created.
pli initialization...
661 loadThemeSetting resource.cpp
No THEMESET_INI exists
[HDMI]: MARS HDMI is running...
[HDMI]: Disable HDCP
[HDMI]: Set I2C Speed = 50 kHz
[HDMI]: Increase i2c pull-low strength.
[HDMI]: Hotplug Change !!! -1 -> 0
checked magic number = 2072407392
open "/dev/cdrom0" failed
Open device(/dev/cdrom0) failed
MediaServer.cpp , 433 bind local IP fail !!error = Unknown error 125
start[0-3] = {7001a500, 7001a504, 7001a508, 7001a50c}
end[0-3] = {7001a510, 7001a514, 7001a518, 7001a51c}
Video DebugMem Physical Address = 0x107e800

[HDMI]: Hotplug Change !!! 0 -> 1 HDMI Cable plugged in. t=749.479
[HDMI]: Turn off HDMI AUDIO
[HDMI]: Send_AudioMute AP_SETUP_HDMI_MUTE=0 Select=1 PS=0
[HDMI]: AP_SETUP_HDMI_MUTE=1
[HDMI]: Set HDMI Audio Mute(Turn off AUDIO)
[HDMI]: Send_AudioMute() Ok, argp.hdmi_mute=1
[HDMI]: HDCP_XMT_LINK_H0 T=000.000
[HDMI]: HDCP_XMT_LINK_H1 T=000.000

[HDMI]: Read_EDID ST T=000.000
[HDMI]: Set I2C Speed = 50 kHz
[HDMI]: Tx Reads EDID from Rx. ST T=000.005
[HDMI]: Tx Reads EDID from Rx. block=0
[HDMI]: Tx Reads EDID from Rx. block=1
MediaServer.cpp , 433 bind local IP fail !!error = Unknown error 125
[HDMI]: Tx Reads EDID from Rx. SP T=000.159
[HDMI]: EDID chksum valid!!! chksum=16384 chksum divide 256=0
[HDMI]: EDID chksum valid!!! chksum=16384 chksum divide 256=0
[HDMI]: 24-bit IEEE Registration Identifier (0x000C03) found => HDMI Device
[HDMI]: HDMI_Device=1
[HDMI]: HDMI_Device=1 => HDMI Device
[HDMI]: Check_HDMI_Device, HDMI_Device=1
[HDMI]: EDID chksum valid!!! chksum=16384 chksum divide 256=0
[HDMI]: HDMI Device
[HDMI]: Check EDID data SP ret=2 VDB data fails
[HDMI]: Invalid EDID.
[HDMI]: Content of EDID:

unsigned char edid_data[256]={
0x00,0xff,0xff,0xff,0xff,0xff,0xff,0x00,0x41,0x0c,0x30,0xd0,0x56,0x34,0x12,0x00,
0x16,0x11,0x01,0x03,0x80,0x29,0x1f,0x78,0x0a,0xf2,0x93,0xa1,0x58,0x48,0x9c,0x25,
0x12,0x4a,0x4d,0xbf,0xce,0x00,0x81,0xc0,0x8b,0xc0,0x81,0x40,0x00,0x01,0x00,0x01,
0x00,0x01,0x00,0x01,0x00,0x01,0x01,0x1d,0x80,0xd0,0x72,0x1c,0x16,0x20,0x10,0x2c,
0x25,0x80,0x98,0x32,0x11,0x00,0x00,0x9a,0x0e,0x1f,0x00,0x80,0x51,0x00,0x1e,0x30,
0x40,0x80,0x37,0x00,0x98,0x32,0x11,0x00,0x00,0x1c,0x00,0x00,0x00,0xfc,0x00,0x50,
0x48,0x4c,0x20,0x32,0x30,0x50,0x46,0x4c,0x34,0x31,0x32,0x32,0x00,0x00,0x00,0xfd,
0x00,0x32,0x3c,0x0f,0x46,0x0f,0x00,0x0a,0x20,0x20,0x20,0x20,0x20,0x20,0x01,0x30,

0x02,0x03,0x23,0xf0,0x50,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x90,0x91,0x92,0x93,
0x94,0x95,0x96,0x9f,0x80,0x23,0x09,0x7f,0x07,0x83,0x01,0x00,0x00,0x65,0x03,0x0c,
0x00,0x10,0x00,0x02,0x3a,0x80,0xd0,0x72,0x38,0x2d,0x40,0x10,0x2c,0x25,0x80,0x98,
0x32,0x11,0x00,0x00,0x1e,0xe9,0x39,0x80,0x18,0x71,0x38,0x2d,0x40,0x58,0x2c,0x25,
0x00,0x98,0x32,0x11,0x00,0x00,0x1e,0x01,0x1d,0x00,0xbc,0x52,0xd0,0x1e,0x20,0xb8,
0x28,0x55,0x40,0x98,0x32,0x11,0x00,0x00,0x1e,0xf5,0x1c,0x00,0x72,0x51,0xd0,0x1e,
0x20,0x6e,0x28,0x55,0x00,0x98,0x32,0x11,0x00,0x00,0x1e,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xc1}
;

memcpy DVI_edid DVI_edid DVI_edid DVI_edid DVI_edid
[HDMI]: DVI monitor
[HDMI]: DVI monitor
[HDMI]: DVI monitor
[HDMI]: DVI monitor
[HDMI]: DVI monitor
[HDMI]: Read_EDID SP T=000.171

[HDMI]: parseHDMI_EDIDInfo
[HDMI]: AUDIO firmware version = 299294 Version=2 old RPC
[HDMI]: call_RPC_TOAGENT_HDMI_OUT_EDID_SVC enable=1 OLD
[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i
60Hz
[HDMI] HDMI_thread(372) call setHDMIAudioVideoFormat()
[HDMI] VID = 0x5 1080i 60Hz
[HDMI]: Turn off HDMI
[HDMI]: Set AVMute
[HDMI]: TURN OFF HDMI PHY for Mars
[HDMI] check EDID structure !!!!
[HDMI]: TVSupportxvYCC = 0
[HDMI]: TVSupportxvYCC = 0, do not send metadata.
[HDMI]: Turn on HDMI for DVI................... 1 s_freq=0 c_cnt=0 t=749.801
[HDMI]: TVSupportYCbCr = 0
[HDMI]: NO YCbCr
[HDMI]: TVSupportDeepColor = 0
[HDMI]: This TV does not support Deep Color Mode.
[HDMI]: TVSupportDeepColorYCbCr444 = 0
[HDMI]: This TV does not support YCbCr444 in Deep Color Modes.
[HDMI]: DVI mode for RGB 1...................... 2 s_freq=3 c_cnt=1 t=749.802
[HDMI]: Disable audio setting by video.
[HDMI]: TVSupportxvYCC = 0, do not send metadata.
[HDMI]: Tell AUDIO firmware, now is HDMI_Video_Format_HD
[HDMI]: Send_Video_Format_To_Audio(1)
[HDMI]: argp.video_type=1
[HDMI]: Clear AVMute
[HDMI]: TURN ON HDMI PHY for Mars
[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i
60Hz
[HDMI]: Setup a wider window of opportunity.
[HDMI]: HDMI_TMDS_SCR1 0x8ca0f0
[HDMI]: HDMISwitchTVSystem SP. t=749.806

[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i
60Hz
Error in pid value: 198, 1321...
WatchDog does not receive signal for 2 seconds, value: 489
[HDMI]: Set AVMute
[HDMI]: TURN OFF HDMI PHY for Mars
MediaServer.cpp , 433 bind local IP fail !!error = Unknown error 125
[HDMI] VID = 0x5 1080i 60Hz
[HDMI]: Turn off HDMI
[HDMI]: Set AVMute
[HDMI]: TURN OFF HDMI PHY for Mars
[HDMI] check EDID structure !!!!
[HDMI]: TVSupportxvYCC = 0
[HDMI]: TVSupportxvYCC = 0, do not send metadata.
[HDMI]: Turn on HDMI for DVI................... 3 s_freq=0 c_cnt=0 t=750.770
[HDMI]: TVSupportYCbCr = 0
[HDMI]: NO YCbCr
[HDMI]: TVSupportDeepColor = 0
[HDMI]: This TV does not support Deep Color Mode.
[HDMI]: TVSupportDeepColorYCbCr444 = 0
[HDMI]: This TV does not support YCbCr444 in Deep Color Modes.
[HDMI]: DVI mode for RGB 1...................... 4 s_freq=3 c_cnt=1 t=750.770
[HDMI]: Disable audio setting by video.
[HDMI]: TVSupportxvYCC = 0, do not send metadata.
[HDMI]: Tell AUDIO firmware, now is HDMI_Video_Format_HD
[HDMI]: Send_Video_Format_To_Audio(1)
[HDMI]: argp.video_type=1
[HDMI]: Clear AVMute
[HDMI]: TURN ON HDMI PHY for Mars
[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i
60Hz
[HDMI]: Setup a wider window of opportunity.
[HDMI]: HDMI_TMDS_SCR1 0x8ca0f0
[HDMI]: HDMISwitchTVSystem SP. t=750.774

[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i
60Hz
from main function = 272905776
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
####### - before ResourceMgr::GetInstance
####### - before bg image
####### - load bg image OK!!!
####### - load icon image[0] OK!!!
####### - load icon image[1] OK!!!
####### - load icon image[2] OK!!!
####### - load icon image[3] OK!!!
####### - load icon image[4] OK!!!
####### - load icon image[5] OK!!!
####### - load icon image[6] OK!!!
[GuideMenu.cpp:358]:xGetCurMoveDownImg()- nFocusedCtrlIndex: 1
######## down ==> [5, 6, (0), 1, 2, 3, 4]
####### - Beore draw other
MediaServer.cpp , 433 bind local IP fail !!error = Unknown error 125
Error in pid value: 198, 1321...
WatchDog does not receive signal for 2 seconds, value: 489
IN : /tmp/net
Create /tmp/net Ok!!!
In my system...
GetDeviceUp 0 flag : 0x1043
SetupClass::GetInstance()->GetNetEth0DHCPEnable() = 1
Normal Kill Pid File = /var/lock/udhcpc_eth0.pid , Pid = 384
Success to kill Pid File = /var/lock/udhcpc_eth0.pid , Pid = 384
Click eth0 DHCP IP and DNS
In my system...
In my system...
[Dlna DMR] GDlnaMediaRendererAP is Start!!!!!
In my system...
In my system...
(AbstractAP.cpp:FAN_State_Clear:8517) Fan off
[SlaveModeUtil.cpp,m_pTCPServerProc,573] - run = 0
TCP connect port ready : 62000
[SlaveModeUtil.cpp,m_pUDPServerProc,336] - run = 0
UDP listen discovery port start : 62000
udhcpc (v1.18.5) started
ifconfig eth0 169.254.78.64
route add -net 0.0.0.0 netmask 0.0.0.0 eth0
Sending discover...
Sending select for 192.168.0.101...
Lease of 192.168.0.101 obtained, lease time 604800
deleting routers
route: SIOCDELRT: No such process
adding dns 192.168.0.1
DNS IP : 8. 8. 4. 4
nameserver 8.8.4.4

In my system...
route: SIOCDELRT: No such device
In my system...

Звук по HDMI так и не появился.

А запусти плеер через консоль потом включи какой-то фильм и все логи потом выложи где-нибудь.

Code: Select all

stopall
cd /usr/local/bin
./DvdPlayer

Вот что получается при этом:

| +

~ # stopall
RootApp AVHDD version...
pli initialization...
remount RO: ...
chip id: 1283: Mars...


>>>>>> Got NAND Flash device!

fw_desc_table_v1->signature=VERONA__
fw_desc_table_v1->version=0x1
fw_desc_table_v1->part_list_len=0xc0
data_buf = 0x10006848
fw_desc_table_v1 = 0x10006848
sizeof(fw_desc_table_v1_t) = 0x20
part_entry = 0x10006868
part_count= 0x4
fw_entry = 0x10006928
FW type, 0x2!
Audio FW found!
Video FW found!
audio_fw_entry->offset = 0x1460000
audio_fw_entry->length = 0x1a14e8
audio_fw_entry->target_addr = 0x81b00000
read len = 0x1a14e8
video_fw_entry->offset = 0x1620000
video_fw_entry->length = 0x239680
video_fw_entry->target_addr = 0x81d80000
read len = 0x239680
remount RW: ...
~ # cd /usr/local/bin
/usr/local/bin # ./DvdPlayer
downloader 0 starts, 0x103aaf38
downloader 1 starts, 0x103ad128
[Dlna DMR] this is GDlnaMediaRendererAP
CMD: mkdir -p /tmp/netb/smb
In my system...
CMD: mkdir -p /tmp/smb
In my system...
CMD: ifconfig > /tmp/netb/samba_my_ip
In my system...
file system 2, sector 4294966272
mount to /tmp/hdd/volumes/HDD1
file system 4, sector 262144
mount to na
file system 3, sector 262144
mount to /tmp/hdd/root






WARNING WARNING WARNING m_db_manage_flag_cnt = -1





DB FILENAME = /tmp/ramfs/Setup
[DataObject.cpp 440]DB Develop Version same . Don't be upgrade.
[DataObject.cpp 479]DB Version same . Don't be upgrade.



m_BookMark_Size=4096 m_Signature_Size=16


GrandMa Revision: 11206r6
(User Input)Pipe Created.
(Internal Event)Pipe Created.
pli initialization...
661 loadThemeSetting resource.cpp
No THEMESET_INI exists
[HDMI]: MARS HDMI is running...
[HDMI]: Disable HDCP
[HDMI]: Set I2C Speed = 50 kHz
[HDMI]: Increase i2c pull-low strength.
[HDMI]: Hotplug Change !!! -1 -> 0
checked magic number = 2072407392
open "/dev/cdrom0" failed
Open device(/dev/cdrom0) failed
start[0-3] = {7001a500, 7001a504, 7001a508, 7001a50c}
end[0-3] = {7001a510, 7001a514, 7001a518, 7001a51c}
Video DebugMem Physical Address = 0xaeb800

[HDMI]: Hotplug Change !!! 0 -> 1 HDMI Cable plugged in. t=750.409
[HDMI]: Turn off HDMI AUDIO
[HDMI]: Send_AudioMute AP_SETUP_HDMI_MUTE=0 Select=1 PS=0
[HDMI]: AP_SETUP_HDMI_MUTE=1
[HDMI]: Set HDMI Audio Mute(Turn off AUDIO)
[HDMI]: Send_AudioMute() Ok, argp.hdmi_mute=1
[HDMI]: HDCP_XMT_LINK_H0 T=000.000
[HDMI]: HDCP_XMT_LINK_H1 T=000.001

[HDMI]: Read_EDID ST T=000.000
[HDMI]: Set I2C Speed = 50 kHz
[HDMI]: Tx Reads EDID from Rx. ST T=000.004
[HDMI]: Tx Reads EDID from Rx. block=0
[HDMI]: Tx Reads EDID from Rx. block=1
[HDMI]: Tx Reads EDID from Rx. SP T=000.785
[HDMI]: EDID chksum valid!!! chksum=16384 chksum divide 256=0
[HDMI]: EDID chksum valid!!! chksum=16384 chksum divide 256=0
[HDMI]: 24-bit IEEE Registration Identifier (0x000C03) found => HDMI Device
[HDMI]: HDMI_Device=1
[HDMI]: HDMI_Device=1 => HDMI Device
[HDMI]: Check_HDMI_Device, HDMI_Device=1
[HDMI]: EDID chksum valid!!! chksum=16384 chksum divide 256=0
[HDMI]: HDMI Device
[HDMI]: Check EDID data SP ret=2 VDB data fails
[HDMI]: Invalid EDID.
[HDMI]: Content of EDID:

unsigned char edid_data[256]={
0x00,0xff,0xff,0xff,0xff,0xff,0xff,0x00,0x41,0x0c,0x30,0xd0,0x56,0x34,0x12,0x00,
0x16,0x11,0x01,0x03,0x80,0x29,0x1f,0x78,0x0a,0xf2,0x93,0xa1,0x58,0x48,0x9c,0x25,
0x12,0x4a,0x4d,0xbf,0xce,0x00,0x81,0xc0,0x8b,0xc0,0x81,0x40,0x00,0x01,0x00,0x01,
0x00,0x01,0x00,0x01,0x00,0x01,0x01,0x1d,0x80,0xd0,0x72,0x1c,0x16,0x20,0x10,0x2c,
0x25,0x80,0x98,0x32,0x11,0x00,0x00,0x9a,0x0e,0x1f,0x00,0x80,0x51,0x00,0x1e,0x30,
0x40,0x80,0x37,0x00,0x98,0x32,0x11,0x00,0x00,0x1c,0x00,0x00,0x00,0xfc,0x00,0x50,
0x48,0x4c,0x20,0x32,0x30,0x50,0x46,0x4c,0x34,0x31,0x32,0x32,0x00,0x00,0x00,0xfd,
0x00,0x32,0x3c,0x0f,0x46,0x0f,0x00,0x0a,0x20,0x20,0x20,0x20,0x20,0x20,0x01,0x30,

0x02,0x03,0x23,0xf0,0x50,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x90,0x91,0x92,0x93,
0x94,0x95,0x96,0x9f,0x80,0x23,0x09,0x7f,0x07,0x83,0x01,0x00,0x00,0x65,0x03,0x0c,
0x00,0x10,0x00,0x02,0x3a,0x80,0xd0,0x72,0x38,0x2d,0x40,0x10,0x2c,0x25,0x80,0x98,
0x32,0x11,0x00,0x00,0x1e,0xe9,0x39,0x80,0x18,0x71,0x38,0x2d,0x40,0x58,0x2c,0x25,
0x00,0x98,0x32,0x11,0x00,0x00,0x1e,0x01,0x1d,0x00,0xbc,0x52,0xd0,0x1e,0x20,0xb8,
0x28,0x55,0x40,0x98,0x32,0x11,0x00,0x00,0x1e,0xf5,0x1c,0x00,0x72,0x51,0xd0,0x1e,
0x20,0x6e,0x28,0x55,0x00,0x98,0x32,0x11,0x00,0x00,0x1e,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xc1}
;

memcpy DVI_edid DVI_edid DVI_edid DVI_edid DVI_edid
[HDMI]: DVI monitor
[HDMI]: DVI monitor
[HDMI]: DVI monitor
[HDMI]: DVI monitor
[HDMI]: DVI monitor
[HDMI]: Read_EDID SP T=000.798

[HDMI]: parseHDMI_EDIDInfo
[HDMI]: Content of ADB in EDID:

unsigned char edid_data[4]={
0x04,0x09,0x07,0x07};

[HDMI]: Audio Data Block 09 07 07 Format = 0x1 => Linear PCM (e.g., IEC60958)

[HDMI]: ENUM_AUDIO_EDID_ENABLE(Really send ADB to AUDIO FW.)
[HDMI]: AUDIO firmware version = 353448 Version=2 new RPC Version 2
[HDMI]: call_RPC_TOAGENT_HDMI_OUT_EDID_SVC enable=1 NEW
[HDMI]: GetVidNameByTV => VIDEO_HD720_60HZ VIDEO_PROGRESSIVE => 720p
60Hz
[HDMI] HDMI_thread(377) call HDMI_GetAutoVideoFormat()
[HDMI]: Set AVMute
[HDMI]: TURN OFF HDMI PHY for Mars
[HDMI] VID = 0x4 720p 60Hz
[HDMI]: Turn off HDMI
[HDMI]: Set AVMute
[HDMI]: TURN OFF HDMI PHY for Mars
[HDMI] check EDID structure !!!!
[HDMI]: TVSupportxvYCC = 0
[HDMI]: TVSupportxvYCC = 0, do not send metadata.
[HDMI]: Turn on HDMI for DVI................... 1 s_freq=0 c_cnt=0 t=751.810
[HDMI]: TVSupportYCbCr = 0
[HDMI]: NO YCbCr
[HDMI]: TVSupportDeepColor = 0
[HDMI]: This TV does not support Deep Color Mode.
[HDMI]: TVSupportDeepColorYCbCr444 = 0
[HDMI]: This TV does not support YCbCr444 in Deep Color Modes.
[HDMI]: DVI mode for RGB 1...................... 2 s_freq=3 c_cnt=1 t=751.810
[HDMI]: Disable audio setting by video.
[HDMI]: TVSupportxvYCC = 0, do not send metadata.
[HDMI]: Tell AUDIO firmware, now is HDMI_Video_Format_HD
[HDMI]: Send_Video_Format_To_Audio(1)
[HDMI]: argp.video_type=1
[HDMI]: Clear AVMute
[HDMI]: TURN ON HDMI PHY for Mars
[HDMI]: GetVidNameByTV => VIDEO_HD720_60HZ VIDEO_PROGRESSIVE => 720p
60Hz
[HDMI]: Setup a wider window of opportunity.
[HDMI]: HDMI_TMDS_SCR1 0x8ca0f0
[HDMI]: HDMISwitchTVSystem SP. t=751.815

[HDMI]: GetVidNameByTV => VIDEO_HD720_60HZ VIDEO_PROGRESSIVE => 720p
60Hz
from main function = 272905880
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
####### - before ResourceMgr::GetInstance
####### - before bg image
####### - load bg image OK!!!
####### - load icon image[0] OK!!!
####### - load icon image[1] OK!!!
####### - load icon image[2] OK!!!
####### - load icon image[3] OK!!!
####### - load icon image[4] OK!!!
####### - load icon image[5] OK!!!
####### - load icon image[6] OK!!!
[GuideMenu.cpp:358]:xGetCurMoveDownImg()- nFocusedCtrlIndex: 1
######## down ==> [5, 6, (0), 1, 2, 3, 4]
####### - Beore draw other
IN : /tmp/net
Create /tmp/net Ok!!!
In my system...
GetDeviceUp 0 flag : 0x1043
SetupClass::GetInstance()->GetNetEth0DHCPEnable() = 1
Normal Kill Pid File = /var/lock/udhcpc_eth0.pid , Pid = 1387
Success to kill Pid File = /var/lock/udhcpc_eth0.pid , Pid = 1387
Click eth0 DHCP IP and DNS
In my system...
In my system...
[Dlna DMR] GDlnaMediaRendererAP is Start!!!!!
In my system...
In my system...
udhcpc (v1.18.5) started
(AbstractAP.cpp:FAN_State_Clear:8517) Fan off
[SlaveModeUtil.cpp,m_pUDPServerProc,336] - run = 0
UDP listen discovery port start : 62000
[SlaveModeUtil.cpp,m_pTCPServerProc,573] - run = 0
TCP connect port ready : 62000
GuideAP.cpp-ProcessKey: Receive Key 125
[HDMI]: HDMI_PrepareToDoSwitchTVSystem. t=754.031
[HDMI]: Set AVMute
[HDMI]: TURN OFF HDMI PHY for Mars

[HDMI]: HDMISwitchTVSystem ST t=1332792754031
[HDMI] Wait for HDMI EDID Ready ...
[HDMI] HDMI EDID Ready - 3 !!!
ifconfig eth0 169.254.127.200
[HDMI] VID = 0x5 1080i 60Hz
[HDMI]: Turn off HDMI
[HDMI]: Set AVMute
[HDMI]: TURN OFF HDMI PHY for Mars
route add -net 0.0.0.0 netmask 0.0.0.0 eth0
Sending discover...
[HDMI] check EDID structure !!!!
[HDMI]: TVSupportxvYCC = 0
[HDMI]: TVSupportxvYCC = 0, do not send metadata.
[HDMI]: Turn on HDMI for DVI................... 3 s_freq=0 c_cnt=0 t=754.150
[HDMI]: TVSupportYCbCr = 0
[HDMI]: NO YCbCr
[HDMI]: TVSupportDeepColor = 0
[HDMI]: This TV does not support Deep Color Mode.
[HDMI]: TVSupportDeepColorYCbCr444 = 0
[HDMI]: This TV does not support YCbCr444 in Deep Color Modes.
[HDMI]: DVI mode for RGB 1...................... 4 s_freq=3 c_cnt=1 t=754.150
[HDMI]: Disable audio setting by video.
[HDMI]: TVSupportxvYCC = 0, do not send metadata.
[HDMI]: Tell AUDIO firmware, now is HDMI_Video_Format_HD
[HDMI]: Send_Video_Format_To_Audio(1)
[HDMI]: argp.video_type=1
[HDMI]: Clear AVMute
[HDMI]: TURN ON HDMI PHY for Mars
[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i
60Hz
[HDMI]: Setup a wider window of opportunity.
[HDMI]: HDMI_TMDS_SCR1 0x8ca0f0
[HDMI]: HDMISwitchTVSystem SP. t=754.155

[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i
60Hz
Sending select for 192.168.0.101...
[HDMI]: HDMI_GetNextVideoFormat_N() next=0
Lease of 192.168.0.101 obtained, lease time 604800
deleting routers
route: SIOCDELRT: No such process
adding dns 192.168.0.1
DNS IP : 8. 8. 4. 4
nameserver 8.8.4.4

In my system...

Вот еще один вариант.
Порядок действий был такой: набрал в телнет команды, перешел в меню "интернет медиа" в модуле "Ukraine Online 2" посмотрел видео, вышел.

| +

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.03.28 22:39:44 =~=~=~=~=~=~=~=~=~=~=~=
OPLAY55 login: root


BusyBox v1.18.5 (2012-02-04 12:06:08 MSK) built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ # stopall
[Found RootApp] pid = 193 ...
[Found dvdplayer] pid = 198 ...
killing DvdPlayer...
killing RootApp...
RootApp AVHDD version...
pli initialization...
remount RO: ...
chip id: 1283: Mars...


>>>>>> Got NAND Flash device!

fw_desc_table_v1->signature=VERONA__
fw_desc_table_v1->version=0x1
fw_desc_table_v1->part_list_len=0xc0
data_buf = 0x10006848
fw_desc_table_v1 = 0x10006848
sizeof(fw_desc_table_v1_t) = 0x20
part_entry = 0x10006868
part_count= 0x4
fw_entry = 0x10006928
FW type, 0x2!
Audio FW found!
Video FW found!
audio_fw_entry->offset = 0x1460000
audio_fw_entry->length = 0x1a14e8
audio_fw_entry->target_addr = 0x81b00000
read len = 0x1a14e8
video_fw_entry->offset = 0x1620000
video_fw_entry->length = 0x239680
video_fw_entry->target_addr = 0x81d80000
read len = 0x239680
remount RW: ...
~ # cd /usr/local/bin
/usr/local/bin # ./DvdPlayer
downloader 0 starts, 0x103aaf38
[Dlna DMR] this is GDlnaMediaRendererAP
downloader 1 starts, 0x103ad128
CMD: mkdir -p /tmp/netb/smb
In my system...
CMD: mkdir -p /tmp/smb
In my system...
CMD: ifconfig > /tmp/netb/samba_my_ip
In my system...
MediaServer.cpp , 433 bind local IP fail !!error = Unknown error 125
file system 2, sector 4294966272
mount to /tmp/hdd/volumes/HDD1
file system 4, sector 262144
mount to na
file system 3, sector 262144
mount to /tmp/hdd/root






WARNING WARNING WARNING m_db_manage_flag_cnt = -1





DB FILENAME = /tmp/ramfs/Setup
[DataObject.cpp 440]DB Develop Version same . Don't be upgrade.
[DataObject.cpp 479]DB Version same . Don't be upgrade.



m_BookMark_Size=4096 m_Signature_Size=16


GrandMa Revision: 11206r6
(User Input)Pipe Created.
(Internal Event)Pipe Created.
pli initialization...
661 loadThemeSetting resource.cpp
No THEMESET_INI exists
[HDMI]: MARS HDMI is running...
[HDMI]: Disable HDCP
[HDMI]: Set I2C Speed = 50 kHz
[HDMI]: Increase i2c pull-low strength.
[HDMI]: Hotplug Change !!! -1 -> 0
checked magic number = 2072407392
open "/dev/cdrom0" failed
Open device(/dev/cdrom0) failed
start[0-3] = {7001a500, 7001a504, 7001a508, 7001a50c}
end[0-3] = {7001a510, 7001a514, 7001a518, 7001a51c}
MediaServer.cpp , 433 bind local IP fail !!error = Unknown error 125
Video DebugMem Physical Address = 0xe9c800

[HDMI]: Hotplug Change !!! 0 -> 1 HDMI Cable plugged in. t=749.363
[HDMI]: Turn off HDMI AUDIO
[HDMI]: Send_AudioMute AP_SETUP_HDMI_MUTE=0 Select=1 PS=0
[HDMI]: AP_SETUP_HDMI_MUTE=1
[HDMI]: Set HDMI Audio Mute(Turn off AUDIO)
[HDMI]: Send_AudioMute() Ok, argp.hdmi_mute=1
[HDMI]: HDCP_XMT_LINK_H0 T=000.000
[HDMI]: HDCP_XMT_LINK_H1 T=000.013

[HDMI]: Read_EDID ST T=000.000
[HDMI]: Set I2C Speed = 50 kHz
[HDMI]: Tx Reads EDID from Rx. ST T=000.005
[HDMI]: Tx Reads EDID from Rx. block=0
[HDMI]: Tx Reads EDID from Rx. block=1
MediaServer.cpp , 433 bind local IP fail !!error = Unknown error 125
[HDMI]: Tx Reads EDID from Rx. SP T=000.492
[HDMI]: EDID chksum valid!!! chksum=16384 chksum divide 256=0
[HDMI]: EDID chksum valid!!! chksum=16384 chksum divide 256=0
[HDMI]: 24-bit IEEE Registration Identifier (0x000C03) found => HDMI Device
[HDMI]: HDMI_Device=1
[HDMI]: HDMI_Device=1 => HDMI Device
[HDMI]: Check_HDMI_Device, HDMI_Device=1
[HDMI]: EDID chksum valid!!! chksum=16384 chksum divide 256=0
[HDMI]: HDMI Device
[HDMI]: Check EDID data SP ret=2 VDB data fails
[HDMI]: Invalid EDID.
[HDMI]: Content of EDID:

unsigned char edid_data[256]={
0x00,0xff,0xff,0xff,0xff,0xff,0xff,0x00,0x41,0x0c,0x30,0xd0,0x56,0x34,0x12,0x00,
0x16,0x11,0x01,0x03,0x80,0x29,0x1f,0x78,0x0a,0xf2,0x93,0xa1,0x58,0x48,0x9c,0x25,
0x12,0x4a,0x4d,0xbf,0xce,0x00,0x81,0xc0,0x8b,0xc0,0x81,0x40,0x00,0x01,0x00,0x01,
0x00,0x01,0x00,0x01,0x00,0x01,0x01,0x1d,0x80,0xd0,0x72,0x1c,0x16,0x20,0x10,0x2c,
0x25,0x80,0x98,0x32,0x11,0x00,0x00,0x9a,0x0e,0x1f,0x00,0x80,0x51,0x00,0x1e,0x30,
0x40,0x80,0x37,0x00,0x98,0x32,0x11,0x00,0x00,0x1c,0x00,0x00,0x00,0xfc,0x00,0x50,
0x48,0x4c,0x20,0x32,0x30,0x50,0x46,0x4c,0x34,0x31,0x32,0x32,0x00,0x00,0x00,0xfd,
0x00,0x32,0x3c,0x0f,0x46,0x0f,0x00,0x0a,0x20,0x20,0x20,0x20,0x20,0x20,0x01,0x30,

0x02,0x03,0x23,0xf0,0x50,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x90,0x91,0x92,0x93,
0x94,0x95,0x96,0x9f,0x80,0x23,0x09,0x7f,0x07,0x83,0x01,0x00,0x00,0x65,0x03,0x0c,
0x00,0x10,0x00,0x02,0x3a,0x80,0xd0,0x72,0x38,0x2d,0x40,0x10,0x2c,0x25,0x80,0x98,
0x32,0x11,0x00,0x00,0x1e,0xe9,0x39,0x80,0x18,0x71,0x38,0x2d,0x40,0x58,0x2c,0x25,
0x00,0x98,0x32,0x11,0x00,0x00,0x1e,0x01,0x1d,0x00,0xbc,0x52,0xd0,0x1e,0x20,0xb8,
0x28,0x55,0x40,0x98,0x32,0x11,0x00,0x00,0x1e,0xf5,0x1c,0x00,0x72,0x51,0xd0,0x1e,
0x20,0x6e,0x28,0x55,0x00,0x98,0x32,0x11,0x00,0x00,0x1e,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xc1,};

memcpy DVI_edid DVI_edid DVI_edid DVI_edid DVI_edid
[HDMI]: DVI monitor
[HDMI]: DVI monitor
[HDMI]: DVI monitor
[HDMI]: DVI monitor
[HDMI]: DVI monitor
[HDMI]: Read_EDID SP T=000.527

[HDMI]: parseHDMI_EDIDInfo
[HDMI]: Content of ADB in EDID:

unsigned char edid_data[4]={
0x04,0x09,0x07,0x07,};

[HDMI]: Audio Data Block 09 07 07 Format = 0x1 => Linear PCM (e.g., IEC60958)

[HDMI]: ENUM_AUDIO_EDID_ENABLE(Really send ADB to AUDIO FW.)
[HDMI]: AUDIO firmware version = 353448 Version=2 new RPC Version 2
[HDMI]: call_RPC_TOAGENT_HDMI_OUT_EDID_SVC enable=1 NEW
[HDMI]: Set AVMute
[HDMI]: TURN OFF HDMI PHY for Mars
[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i 60Hz
[HDMI] HDMI_thread(372) call setHDMIAudioVideoFormat()
[HDMI] VID = 0x5 1080i 60Hz
[HDMI]: Turn off HDMI
[HDMI]: Set AVMute
[HDMI]: TURN OFF HDMI PHY for Mars
[HDMI] check EDID structure !!!!
[HDMI]: TVSupportxvYCC = 0
[HDMI]: TVSupportxvYCC = 0, do not send metadata.
[HDMI]: Turn on HDMI for DVI................... 1 s_freq=0 c_cnt=0 t=750.217
[HDMI]: TVSupportYCbCr = 0
[HDMI]: NO YCbCr
[HDMI]: TVSupportDeepColor = 0
[HDMI]: This TV does not support Deep Color Mode.
[HDMI]: TVSupportDeepColorYCbCr444 = 0
[HDMI]: This TV does not support YCbCr444 in Deep Color Modes.
[HDMI]: DVI mode for RGB 1...................... 2 s_freq=3 c_cnt=1 t=750.217
[HDMI]: Disable audio setting by video.
[HDMI]: TVSupportxvYCC = 0, do not send metadata.
[HDMI]: Tell AUDIO firmware, now is HDMI_Video_Format_HD
[HDMI]: Send_Video_Format_To_Audio(1)
[HDMI]: argp.video_type=1
[HDMI]: Clear AVMute
[HDMI]: TURN ON HDMI PHY for Mars
[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i 60Hz
[HDMI]: Setup a wider window of opportunity.
[HDMI]: HDMI_TMDS_SCR1 0x8ca0f0
[HDMI]: HDMISwitchTVSystem SP. t=750.221

[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i 60Hz
[HDMI] VID = 0x5 1080i 60Hz
[HDMI]: Turn off HDMI
[HDMI]: Set AVMute
[HDMI]: TURN OFF HDMI PHY for Mars
[HDMI] check EDID structure !!!!
[HDMI]: TVSupportxvYCC = 0
[HDMI]: TVSupportxvYCC = 0, do not send metadata.
[HDMI]: Turn on HDMI for DVI................... 3 s_freq=0 c_cnt=0 t=750.364
[HDMI]: TVSupportYCbCr = 0
[HDMI]: NO YCbCr
[HDMI]: TVSupportDeepColor = 0
[HDMI]: This TV does not support Deep Color Mode.
[HDMI]: TVSupportDeepColorYCbCr444 = 0
[HDMI]: This TV does not support YCbCr444 in Deep Color Modes.
[HDMI]: DVI mode for RGB 1...................... 4 s_freq=3 c_cnt=1 t=750.364
[HDMI]: Disable audio setting by video.
[HDMI]: TVSupportxvYCC = 0, do not send metadata.
[HDMI]: Tell AUDIO firmware, now is HDMI_Video_Format_HD
[HDMI]: Send_Video_Format_To_Audio(1)
[HDMI]: argp.video_type=1
[HDMI]: Clear AVMute
[HDMI]: TURN ON HDMI PHY for Mars
[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i 60Hz
[HDMI]: Setup a wider window of opportunity.
[HDMI]: HDMI_TMDS_SCR1 0x8ca0f0
[HDMI]: HDMISwitchTVSystem SP. t=750.368

[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i 60Hz
from main function = 272905968
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
####### - before ResourceMgr::GetInstance
####### - before bg image
####### - load bg image OK!!!
MediaServer.cpp , 433 bind local IP fail !!error = Unknown error 125
####### - load icon image[0] OK!!!
####### - load icon image[1] OK!!!
####### - load icon image[2] OK!!!
####### - load icon image[3] OK!!!
####### - load icon image[4] OK!!!
####### - load icon image[5] OK!!!
####### - load icon image[6] OK!!!
[GuideMenu.cpp:358]:xGetCurMoveDownImg()- nFocusedCtrlIndex: 1
######## down ==> [5, 6, (0), 1, 2, 3, 4]
####### - Beore draw other
IN : /tmp/net
Create /tmp/net Ok!!!
In my system...
GetDeviceUp 0 flag : 0x1043
SetupClass::GetInstance()->GetNetEth0DHCPEnable() = 1
Normal Kill Pid File = /var/lock/udhcpc_eth0.pid , Pid = 372
Success to kill Pid File = /var/lock/udhcpc_eth0.pid , Pid = 372
Click eth0 DHCP IP and DNS
In my system...
[Dlna DMR] GDlnaMediaRendererAP is Start!!!!!
In my system...
In my system...
In my system...
(AbstractAP.cpp:FAN_State_Clear:8517) Fan off
[SlaveModeUtil.cpp,m_pUDPServerProc,336] - run = 0
UDP listen discovery port start : 62000
[SlaveModeUtil.cpp,m_pTCPServerProc,573] - run = 0
TCP connect port ready : 62000
udhcpc (v1.18.5) started
ifconfig eth0 169.254.16.89
route add -net 0.0.0.0 netmask 0.0.0.0 eth0
Sending discover...
Sending select for 192.168.0.101...
Lease of 192.168.0.101 obtained, lease time 604800
deleting routers
route: SIOCDELRT: No such process
adding dns 192.168.0.1
DNS IP : 8. 8. 4. 4
nameserver 8.8.4.4

In my system...
route: SIOCDELRT: No such device
In my system...
route: SIOCDELRT: No such device
DLNA_DMR.cpp, DMR_Network_Monitor, 362 System IPs changes!!!
++++=== translateToInternalCommand: right GuideAP.cpp-ProcessKey: Receive Key 22
[GuideMenu.cpp:358]:xGetCurMoveDownImg()- nFocusedCtrlIndex: 0
######## down ==> [4, 5, (6), 0, 1, 2, 3]
++++=== translateToInternalCommand: right (SЅ`3ЅGuideAP.cpp-ProcessKey: Receive Key 22
[GuideMenu.cpp:358]:xGetCurMoveDownImg()- nFocusedCtrlIndex: 6
######## down ==> [3, 4, (5), 6, 0, 1, 2]
++++=== translateToInternalCommand: right (SЅ`3ЅGuideAP.cpp-ProcessKey: Receive Key 22
[GuideMenu.cpp:358]:xGetCurMoveDownImg()- nFocusedCtrlIndex: 5
######## down ==> [2, 3, (4), 5, 6, 0, 1]
RemoteControl.cpp-IRCodeTranslate: Code a25d686c
GuideAP.cpp-ProcessKey: Receive Key 23
[WT] AP From: TO:IMSAP
[WT] AP Payload of new AP:
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
[IMSAP.cpp:940]:Activate()- (3):
[IMSAP.cpp:5570]:xHandleStringCmd()- (3): IMSAP (0x7fbd5670), TopMenu (0x7fbd5688), rss_file://./scripts/menu.rss (0x7fbd56a0),
[IMSAP.cpp:5593]:xHandleStringCmd()-m_starPage:rss_file://./scripts/menu.rss
In my system...
--------------- [IMSAP.cpp][IMSAPInit_one][4679]: internal hdd not found ----------------
*********** in init ,create11111111111111Table =============
############### m_bIsActivate = 1
NTP, contacting time.nist.gov for time
picked dld 1, 0x103a85d8
NTP client has obtained time! set system....
NTP success! quit!
dthread 1, got a command
begin job
connected 1, ptr 0x103a85d8
downloading starts 1, 0x103a85d8
read response 0, done 1
download done for 1, http://127.0.0.1/?page=xml_menu, 0x103a85d8
clean up fd 1
++++=== translateToInternalCommand: right (SЅ`3Ѕ++++=== translateToInternalCommand: down (SЅ`3Ѕ++++=== translateToInternalCommand: down (SЅ`3ЅRemoteControl.cpp-IRCodeTranslate: Code a25d686c
picked dld 2, 0x103a8680
dthread 0, got a command
begin job
connected 2, ptr 0x103a8680
downloading starts 2, 0x103a8680
read response 0, done 2
download done for 2, http://127.0.0.1/modules/uaonline2/ua_main.php, 0x103a8680
clean up fd 2
############### m_bIsActivate = 1
[Script] return_message2
picked dld 3, 0x103a8728
dthread 1, got a command
begin job
connected 3, ptr 0x103a8728
downloading starts 3, 0x103a8728
read response 0, done 3
download done for 3, http://127.0.0.1/modules/uaonline2/ua_s ... php?load=1, 0x103a8728
clean up fd 3
RemoteControl.cpp-IRCodeTranslate: Code a25d686c
picked dld 4, 0x103a87d0
dthread 0, got a command
begin job
connected 4, ptr 0x103a87d0
downloading starts 4, 0x103a87d0
read response 0, done 4
download done for 4, http://127.0.0.1/modules/uaonline2/ua_favorites_rss.php, 0x103a87d0
clean up fd 4
############### m_bIsActivate = 1
picked dld 5, 0x103a8878
dthread 1, got a command
begin job
connected 5, ptr 0x103a8878
downloading starts 5, 0x103a8878
read response 0, done 5
download done for 5, http://127.0.0.1/modules/uaonline2/ua_p ... ite_logo=0, 0x103a8878
clean up fd 5
picked dld 6, 0x103a8920
dthread 0, got a command
begin job
connected 6, ptr 0x103a8920
downloading starts 6, 0x103a8920
read response 0, done 6
download done for 6, http://127.0.0.1/modules/uaonline2/ua_p ... ite_logo=1, 0x103a8920
clean up fd 6
picked dld 7, 0x103a89c8
dthread 1, got a command
begin job
connected 7, ptr 0x103a89c8
downloading starts 7, 0x103a89c8
read response 0, done 7
download done for 7, http://127.0.0.1/modules/uaonline2/ua_p ... ite_logo=2, 0x103a89c8
clean up fd 7
picked dld 8, 0x103a8a70
dthread 0, got a command
begin job
connected 8, ptr 0x103a8a70
downloading starts 8, 0x103a8a70
read response 0, done 8
download done for 8, http://127.0.0.1/modules/uaonline2/ua_p ... ite_logo=3, 0x103a8a70
clean up fd 8
picked dld 9, 0x103a8b18
dthread 1, got a command
begin job
connected 9, ptr 0x103a8b18
downloading starts 9, 0x103a8b18
read response 0, done 9
download done for 9, http://127.0.0.1/modules/uaonline2/ua_p ... ite_logo=4, 0x103a8b18
clean up fd 9
picked dld 10, 0x103a8bc0
picked dld 11, 0x103a8c68
dthread 0, got a command
begin job
dthread 1, got a command
begin job
connected 11, ptr 0x103a8c68
downloading starts 11, 0x103a8c68
download done for 11, http://127.0.0.1/modules/uaonline2/images/ua_fsua.png, 0x103a8c68
connected 10, ptr 0x103a8bc0
downloading starts 10, 0x103a8bc0
download done for 10, http://s1.dotua.org/fsua_items/cover/00 ... 104475.jpg, 0x103a8bc0
########### - SW dec JPEG - i[190, 272], t[315, 88, 80, 91], p:0, ty:1, /tmp/cached/http___s1.dotua.org_fsua_items_cover_00_10_44_2_00104475.jpg
RemoteControl.cpp-IRCodeTranslate: Code a25d686c
########### - SW dec JPEG - i[190, 272], t[315, 88, 80, 91], p:0, ty:1, /tmp/cached/http___s1.dotua.org_fsua_items_cover_00_10_44_2_00104475.jpg
picked dld 12, 0x103a8d10
dthread 0, got a command
begin job
connected 12, ptr 0x103a8d10
downloading starts 12, 0x103a8d10
read response 0, done 12
download done for 12, http://127.0.0.1/modules/uaonline2/ua_p ... _type=link, 0x103a8d10
clean up fd 12
[Script] LINK========= http://127.0.0.1/modules/uaonline2/ua_f ... lder=24224
File=commonData.cpp,Func=jumpToLink,argv=startLinkpicked dld 13, 0x103a8db8
dthread 1, got a command
begin job
RemoteControl.cpp-IRCodeTranslate: Code a25d686c
connected 13, ptr 0x103a8db8
redirect dld on 0x103a8db8, url http://127.0.0.1/modules/uaonline2/ua_fsua_rss_link.php
connected 13, ptr 0x103a8db8
downloading starts 13, 0x103a8db8
read response 0, done 13
download done for 13, http://127.0.0.1/modules/uaonline2/ua_fsua_rss_link.php, 0x103a8db8
clean up fd 13
############### m_bIsActivate = 1
picked dld 14, 0x103a8e60
dthread 0, got a command
begin job
connected 14, ptr 0x103a8e60
downloading starts 14, 0x103a8e60
read response 0, done 14
download done for 14, http://127.0.0.1/modules/uaonline2/ua_p ... _style=req, 0x103a8e60
clean up fd 14
picked dld 15, 0x103a8f08
dthread 1, got a command
begin job
connected 15, ptr 0x103a8f08
downloading starts 15, 0x103a8f08
read response 0, done 15
download done for 15, http://127.0.0.1/modules/uaonline2/ua_e ... =53&num=20, 0x103a8f08
clean up fd 15
[Script] countPage - 3
nothing
[Script] maxCount - 20
[Script] count - 0
########### - SW dec JPEG - i[190, 272], t[102, 396, 192, 244], p:0, ty:1, /tmp/cached/http___s1.dotua.org_fsua_items_cover_00_10_44_2_00104475.jpg
########### - SW dec JPEG - i[190, 272], t[102, 396, 192, 244], p:0, ty:1, /tmp/cached/http___s1.dotua.org_fsua_items_cover_00_10_44_2_00104475.jpg
RemoteControl.cpp-IRCodeTranslate: Code a25d686c
[Script] act============== http://127.0.0.1/modules/uaonline2/ua_f ... 9+2005.avi
File=commonData.cpp,Func=jumpToLink,argv=playLink_OSDpicked dld 16, 0x103a8fb0
dthread 0, got a command
begin job
connected 16, ptr 0x103a8fb0
downloading starts 16, 0x103a8fb0
read response 0, done 16
download done for 16, http://127.0.0.1/modules/uaonline2/ua_player.php?idx=0, 0x103a8fb0
clean up fd 16
############### m_bIsActivate = 1
nothing
(2421):I can't draw image/Film-Canister-128x128.png
init 0 target 262144 and current 0 EOF 0
play file at offset -1
>>>>>>>>>>> start to play file: http://127.0.0.1/modules/uaonline2/ua_f ... 9+2005.avi <<<<<<<<<<<<
In my system...
umount: Couldn't umount /tmp/disk: No such file or directory
In my system...
TTDecodeFilter....
TTDecoderCreate.....
TTMainThread...start...
creating thread
TTDecoderCreate...1..done
TTDecodeFilter....done m_id = 1
start ao rpc config
start ao rpc config spdif
[./PPAout/CPPAOut.cpp 48] audioVersion = 353448
PPAOUT output pin is aout pin
httpplugin open http://127.0.0.1/modules/uaonline2/ua_f ... 9+2005.avi
HTTP redirect encountered!
HTTP redirect encountered!
Http IO plugin open success(1), content len 1565310976 (offset 0)
*** init HTTP buffer rd 0x2acb0008, wr 0x2acb0008, valid 0x2acb0008
#####HTTP ioplugin open success (1565310976) !
#attempt to seek to 0, from 32768
#attempt to seek to 1561509888, from 65536
http read, delay seek
########SEEK to 1561509888 from 65536
wait for thread seek!
###thread go http seek
Http IO plugin open success(68), content len 3801088 (offset 1561509888)
Seek done by thread
#attempt to seek to 16384, from 1561575424
http read, delay seek
########SEEK to 16384 from 1561575424
wait for thread seek!
###thread go http seek
Http IO plugin open success(68), content len 1565294592 (offset 16384)
Seek done by thread
[checkLoadMedia][4230]: We enter checkLoadMedia()
>>>>>>>>>>>>>> load media ok <<<<<<<<<<<<<<<
streaming rate at 48158, (389389/727702)
[CUsbAOutFilter.cpp 291] channel 0 : lowerAddr = 0x620a0000, writePtr = 0x620a0000, readPtr = 0x620a0000
[CUsbAOutFilter.cpp 316] channel 1 : lowerAddr = 0x620b0000, writePtr = 0x620b0000, readPtr = 0x620b0000
read handle
Open: unable to open `/dev/sound/dsp' with O_RDONLY, Unknown error 2
#######[cfyeh-debug] Open(42)
read handle 0
write handle
Open: unable to open `/dev/sound/audio' with O_WRONLY, Unknown error 2
#######[cfyeh-debug] Open(55)
write handle 0
Open: unable to open `/dev/sound/dsp' with O_WRONLY, Unknown error 2
#######[cfyeh-debug] Open(65)
write handle 0
Open: unable to open `/dev/sound/dsp' with O_RDONLY or O_WRONLY !!! #######[cfyeh-debug] Open(75)
*** aout pause
PPAOUT init ring: output pin is aout pin
TTDecodeFilter::Pause
flush TELETEXT begin
TTPinFlush...
TTPinFlush...return 1.
flush TELETEXT end
flush SPIC begin
flush SPIC end
flush AUDIO begin
[CUsbAOutFilter.cpp 338] flush readPtr = 0x620a0000
[CUsbAOutFilter.cpp 338] flush readPtr = 0x620b0000
flush AUDIO end
flush VIDEO begin
flush VIDEO end
flush AUDIO begin
[CUsbAOutFilter.cpp 338] flush readPtr = 0x620a0000
[CUsbAOutFilter.cpp 338] flush readPtr = 0x620b0000
flush AUDIO end
sourceRate= 256, decodeRate= 256
#attempt to seek to 1561509888, from 81920
http read, delay seek
########SEEK to 1561509888 from 81920
wait for thread seek!
###thread go http seek
TTDecodeFilter::Run
Http IO plugin open success(68), content len 3801088 (offset 1561509888)
Seek done by thread
MutexTimedLock timeout
MutexTimedLock timeout
MutexTimedLock timeout
MutexTimedLock timeout
MutexTimedLock timeout
MutexTimedLock timeout
MutexTimedLock timeout
MutexTimedLock timeout
MutexTimedLock timeout
MutexTimedLock timeout
MutexTimedLock timeout
MutexTimedLock timeout
MutexTimedLock timeout
streaming rate at 58018, (470335/729603)
MutexTimedLock timeout
MutexTimedLock timeout
MutexTimedLock timeout
MutexTimedLock timeout
MutexTimedLock timeout
MutexTimedLock timeout
#attempt to seek to 1561509888, from 1562099712
#attempt to seek to 1561509888, from 1562099712
#attempt to seek to 8192, from 1562099712
http read, delay seek
########SEEK to 8192 from 1562099712
wait for thread seek!
###thread go http seek
Http IO plugin open success(68), content len 1565302784 (offset 8192)
Seek done by thread
MutexTimedLock timeout
unknown code 26
unknown code 36
GetCachedStreamDataSize IOFullness 0 and videoFullness 16966
init 0 target 262144 and current 6 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 77496
init 0 target 262144 and current 29 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 110622
init 0 target 262144 and current 42 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 198214
init 0 target 262144 and current 75 EOF 0
streaming rate at 69627, (526251/680226)
GetCachedStreamDataSize IOFullness 0 and videoFullness 231299
init 0 target 262144 and current 88 EOF 0
unknown code 38
AUDIO_RPC_ToSystem_HDMI_Setting_0_svc(311) prio_process = 0
[HDMI]: DVI monitor, no need to setup HDMI AUDIO.
GetCachedStreamDataSize IOFullness 0 and videoFullness 268955
init 0 target 262144 and current 100 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 243537
init 0 target 262144 and current 92 EOF 0
unable to scan 2 ints
GetCachedStreamDataSize IOFullness 0 and videoFullness 279212
init 0 target 262144 and current 100 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 352647
init 0 target 262144 and current 100 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 373563
init 0 target 262144 and current 100 EOF 0
streaming rate at 81280, (525600/581986)
GetCachedStreamDataSize IOFullness 0 and videoFullness 409738
init 0 target 262144 and current 100 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 457458
init 0 target 262144 and current 100 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 548145
init 0 target 262144 and current 100 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 588272
init 0 target 262144 and current 100 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 626133
init 0 target 262144 and current 100 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 631459
init 0 target 262144 and current 100 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 643032
init 0 target 262144 and current 100 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 626928
init 0 target 262144 and current 100 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 626082
init 0 target 262144 and current 100 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 567649
init 0 target 262144 and current 100 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 505290
init 0 target 262144 and current 100 EOF 0
MutexTimedLock timeout
GetCachedStreamDataSize IOFullness 0 and videoFullness 477172
init 0 target 262144 and current 100 EOF 0
MutexTimedLock timeout
GetCachedStreamDataSize IOFullness 0 and videoFullness 361110
init 0 target 262144 and current 100 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 233699
init 0 target 262144 and current 89 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 39279
init 0 target 262144 and current 14 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 34214
init 0 target 262144 and current 13 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 24432
init 0 target 262144 and current 9 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 46382
init 0 target 262144 and current 17 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 35613
init 0 target 262144 and current 13 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 15862
init 0 target 262144 and current 6 EOF 0
MutexTimedLock timeout
GetCachedStreamDataSize IOFullness 0 and videoFullness 28497
init 0 target 262144 and current 10 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 27658
init 0 target 262144 and current 10 EOF 0
MutexTimedLock timeout
GetCachedStreamDataSize IOFullness 0 and videoFullness 16410
init 0 target 262144 and current 6 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 64306
init 0 target 262144 and current 24 EOF 0
MutexTimedLock timeout
GetCachedStreamDataSize IOFullness 0 and videoFullness 29458
init 0 target 262144 and current 11 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 32700
init 0 target 262144 and current 12 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 30806
init 0 target 262144 and current 11 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 30329
init 0 target 262144 and current 11 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 26057
init 0 target 262144 and current 9 EOF 0
GetCachedStreamDataSize IOFullness 0 and videoFullness 27340
init 0 target 262144 and current 10 EOF 0
++++=== translateToInternalCommand: stop Ђ[Script] *player_tv input*** video_stop






WARNING WARNING WARNING m_db_manage_flag_cnt = -1





DB FILENAME = /tmp/ramfs/bookmark.sdb
[DataObject.cpp 440]DB Develop Version same . Don't be upgrade.
[DataObject.cpp 479]DB Version same . Don't be upgrade.
m_numOfBookmarks = 10 , candidate_time = 1332963769
0 key =http://127.0.0.1/modules/uaonline2/ua_fsua_parser.php?play=http%3A%2F%2Ffs.ua%2Fget%2Fdl%2F8ozpo55lfpl57vb05u6y40949%2F+%D0%9A%D0%B2%D0%B0%D1%80%D1%82%D0%B0%D0%BB-95+%28%D0%92%D1%8B%D0%BF%D1%83%D1%81%D0%BA-21+%D1%87%D0%B0%D1%81%D1%82%D1%8C+1%29+2007.avi , modify_time = 1332867146 , candidate_time = 1332867146 ,candidate=0
1 key =http://127.0.0.1/modules/uaonline2/ua_fsua_parser.php?play=http%3A%2F%2Ffs.ua%2Fget%2Fdl%2F8ozpo55lfpl57vb05u6ksk9pl%2F+%D0%9A%D0%B2%D0%B0%D1%80%D1%82%D0%B0%D0%BB-95+%28%D0%92%D1%8B%D0%BF%D1%83%D1%81%D0%BA-19%29+2007.avi , modify_time = 1332869437 , candidate_time = 1332867146 ,candidate=0
2 key =fileset:///tmp/ramfs/volumes/C:/torrent/Красавчик.avi_title1 , modify_time = 1332874993 , candidate_time = 1332867146 ,candidate=0
3 key =http://127.0.0.1/modules/uaonline2/ua_filmix_parser.php?play=http%3A%2F%2Fvideo-4.filmix.net%2Fs%2F8f9c1e0383013e84f792c8c782a0d5e4%2F_02%2FEkstrasens.flv , modify_time = 1332963073 , candidate_time = 1332867146 ,candidate=0
4 key =http://127.0.0.1/modules/uaonline2/ua_fsua_parser.php?play=http%3A%2F%2Ffs.ua%2Fget%2Fdl%2F8ozpo55lfrz9uatp9gwfzb18p%2FDrygoi.mir.4.2012.D.DVDRip.2100Mb.RUS.UKR.avi , modify_time = 1332880344 , candidate_time = 1332867146 ,candidate=0
5 key =http://127.0.0.1/modules/uaonline2/ua_exua_parser.php?play=http://www.ex.ua/get/23255841 , modify_time = 1332957471 , candidate_time = 1332867146 ,candidate=0
6 key =http://127.0.0.1/modules/uaonline2/ua_exua_parser.php?play=http://www.ex.ua/get/23199529 , modify_time = 1332957664 , candidate_time = 1332867146 ,candidate=0
7 key =http://127.0.0.1/modules/uaonline2/ua_exua_parser.php?play=http://www.ex.ua/get/23217720 , modify_time = 1332958528 , candidate_time = 1332867146 ,candidate=0
8 key =http://82.114.242.31:8081/?ticket=4a7ef40c21c977f604ed6876629fd67edd5e78fd16667af86b8ebf6c158ad954f65aea54e26cc07c337a8d0d4869828795939e83f2f66d5908f3cdc6642e03342f9d54257db6c0cf268511f52bfd218b224d9dba78227cd848369a5093007340d71e5ced7c79103b58dc1f058825c3b38aca15861c510d9774b275fe , modify_time = 1332866498 , candidate_time = 1332866498 ,candidate=8
9 key =http://82.114.242.31:8081/?ticket=0c5f00e6a39d9ad3a2b7f80c25572517f5bdcd927698a176093e3e4e3614477fcf6474c5dbda735a0e0967dfb843f248b7bb33589782052540cf29f988e6478eacc3e80a58428d39a6a75f4d962db776053e7e3e3d9c8131dfbc1543487ec18c73a4cdd731e7c535c1ae3fa18758d12b624080d5792c6d77e20b54476ebd6e1c , modify_time = 1332866647 , candidate_time = 1332866498 ,candidate=8
delete candidate=8 key = (null)
candidate=8 key = http://127.0.0.1/modules/uaonline2/ua_f ... 9+2005.avi
read handle
Open: unable to open `/dev/sound/dsp' with O_RDONLY, Unknown error 2
#######[cfyeh-debug] Open(42)
read handle 0
write handle
Open: unable to open `/dev/sound/audio' with O_WRONLY, Unknown error 2
#######[cfyeh-debug] Open(55)
write handle 0
Open: unable to open `/dev/sound/dsp' with O_WRONLY, Unknown error 2
#######[cfyeh-debug] Open(65)
write handle 0
Open: unable to open `/dev/sound/dsp' with O_RDONLY or O_WRONLY !!! #######[cfyeh-debug] Open(75)
state force paused
state force paused
TTDecodeFilter::Pause
state force stoped
enter audio stop
enter audio stop -- leave block
state force stoped
TTDecodeFilter::Stop
TTDecodeFilter::TTEnable(0)
Stopping
leave Stopping
MutexTimedLock timeout
#attempt to seek to 1561509888, from 3698688
http read, delay seek
########SEEK to 1561509888 from 3698688
wait for thread seek!
###thread go http seek
Http IO plugin open success(68), content len 3801088 (offset 1561509888)
Seek done by thread
tell thread reader to quit!
thread cleans up.... die die die
In my system...
umount: Couldn't umount /tmp/disk: No such file or directory
In my system...
init 0 target 262144 and current 0 EOF 0
[Script] stop_play------ 1
[Script] *player_tv input*** return
picked dld 17, 0x103a9058
dthread 1, got a command
begin job
connected 17, ptr 0x103a9058
downloading starts 17, 0x103a9058
read response 0, done 17
download done for 17, http://127.0.0.1/modules/uaonline2/ua_p ... _style=req, 0x103a9058
clean up fd 17
picked dld 18, 0x103a9100
dthread 0, got a command
begin job
connected 18, ptr 0x103a9100
downloading starts 18, 0x103a9100
read response 0, done 18
download done for 18, http://127.0.0.1/modules/uaonline2/ua_e ... =53&num=20, 0x103a9100
clean up fd 18
[Script] countPage - 3
[Script] idx_play 0
[Script] maxCount - 20
[Script] count - 0
########### - SW dec JPEG - i[190, 272], t[102, 396, 192, 244], p:0, ty:1, /tmp/cached/http___s1.dotua.org_fsua_items_cover_00_10_44_2_00104475.jpg
########### - SW dec JPEG - i[190, 272], t[102, 396, 192, 244], p:0, ty:1, /tmp/cached/http___s1.dotua.org_fsua_items_cover_00_10_44_2_00104475.jpg
RemoteControl.cpp-IRCodeTranslate: Code fd20bf00

глянул ваши дровы для DSP ....
древние что писец . даж многоканальный звук не умеют. (попытка выбрать на них AC3 приводит к краху)

ЗЫ в AMP прошивке покажите

Code: Select all

stopall
09

Вот такой лог:

| +

~ # stopall
RootApp AVHDD version...
pli initialization...
remount RO: ...
chip id: 1283: Mars...


>>>>>> Got NAND Flash device!

fw_desc_table_v1->signature=VERONA__
fw_desc_table_v1->version=0x1
fw_desc_table_v1->part_list_len=0xc0
data_buf = 0x10006848
fw_desc_table_v1 = 0x10006848
sizeof(fw_desc_table_v1_t) = 0x20
part_entry = 0x10006868
part_count= 0x4
fw_entry = 0x10006928
FW type, 0x2!
Audio FW found!
Video FW found!
audio_fw_entry->offset = 0x1460000
audio_fw_entry->length = 0x1a14e8
audio_fw_entry->target_addr = 0x81b00000
read len = 0x1a14e8
video_fw_entry->offset = 0x1620000
video_fw_entry->length = 0x239680
video_fw_entry->target_addr = 0x81d80000
read len = 0x239680
remount RW: ...
~ # 09
UID:00000020 00000094
QFP package
PLL SCPU:405.00 MHz
PLL ACPU:337.50 MHz
PLL VCPU:256.50 MHz
PLL DDR :337.50 MHz
PLL BUS :337.50 MHz
MARS RTD1073 DD
~ #

[Sekator500]

[HDMI]: DVI monitor, no need to setup HDMI AUDIO.

Он считает телек монитором, а в DVI ясное дело звука нет, у меня такое было пару раз помогало передернуть hdmi кабель (окисление контактов так сказать)

Посмотри в настройках видео сколько у тебя там расширений много или штуки 3 - 4 ?

[Virtual]

мдя.... если кабель не поможет., то только менять прошивку у телика.... иначе большинство современных прошивок для плееров наотрез откажутся давать звук DVI монитору .

ЗЫ есть еще вариант для гуру паяльника . но пока не обсуждаем.

[yuri164]

[HDMI]: DVI monitor, no need to setup HDMI AUDIO.

Он считает телек монитором, а в DVI ясное дело звука нет, у меня такое было пару раз помогало передернуть hdmi кабель (окисление контактов так сказать)

Но в родной прошивке звук по HDMI есть.
Есть ли смысл поставить родную прошивку и смотреть логи?

PS
На всякий случай, модель телика Philips 20PFL4122/10

[Sekator500]

Попробуй конечно, посмотрим может будет полезная информация.

[yuri164]

Сегодня вернул "родную" прошивку.
После выполнения команд

Code: Select all

stopall
cd /usr/local/bin
./DvdPlayer

и просмотра куска фильма на диске получился вот такой лог.

| +

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.03.29 21:50:06 =~=~=~=~=~=~=~=~=~=~=~=
Venus login: root


BusyBox v1.1.3 (2010.02.23-03:54+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ # stopall
[Found RootApp] pid = 186 ...
[Found dvdplayer] pid = 198 ...
killing DvdPlayer...
killing RootApp...
RootApp AVHDD version...
pli initialization...
remount RO: ...
chip id: 1283: Mars...


>>>>>> Got NAND Flash device!

fw_desc_table_v1->signature=VERONA__
fw_desc_table_v1->version=0x1
fw_desc_table_v1->part_list_len=0xc0
data_buf = 0x10006868
fw_desc_table_v1 = 0x10006868
sizeof(fw_desc_table_v1_t) = 0x20
part_entry = 0x10006888
part_count= 0x4
fw_entry = 0x10006948
FW type, 0x2!
Audio FW found!
Video FW found!
audio_fw_entry->offset = 0x1440000
audio_fw_entry->length = 0x1b6368
audio_fw_entry->target_addr = 0x81b00000
read len = 0x1b6368
video_fw_entry->offset = 0x1600000
video_fw_entry->length = 0x22c1d8
video_fw_entry->target_addr = 0x81d80000
read len = 0x22c1d8
remount RW: ...
~ # cd /usr/local/bin
/usr/local/bin # ./DvdPlayer
downloader 0 starts, 0x10225e38
downloader 1 starts, 0x10228028
CMD: mkdir -p /tmp/netb/smb
In my system...
CMD: mkdir -p /tmp/smb
In my system...
CMD: ifconfig > /tmp/netb/samba_my_ip
In my system...
file system 2, sector 4294966272
mount to /tmp/hdd/volumes/HDD1
file system 4, sector 262144
mount to na
file system 3, sector 262144
mount to /tmp/hdd/root
DB FILENAME = /tmp/ramfs/Setup
[DataObject.cpp 399]DB Develop Version same . Don't be upgrade.
[DataObject.cpp 438]DB Version same . Don't be upgrade.



m_BookMark_Size=4096 m_Signature_Size=16


GrandMa Revision: 299486
(User Input)Pipe Created.
(Internal Event)Pipe Created.
pli initialization...
528 loadThemeSetting resource.cpp
No THEMESET_INI exists
open "/dev/cdrom0" failed
Open device(/dev/cdrom0) failed
Video DebugMem Physical Address = 0x100f600
[HDMI]: Set AVMute
IN : /tmp/ramfs/usb/livepause
IN : /tmp/ramfs/usb/rec
Activate

m_browserDevice: 3

2357 SetCurrentBrowserTypeChoice GNewBrowserMenu.cpp 3
[GBrowserAP.cpp:477]:GiveUpFocus()- %%%%%% - !!
IN : /tmp/net
Create /tmp/net Ok!!!
In my system...

3 usb block device found

device 0 is /sys/block/sda

device 1 is /sys/block/sdb
host=2, bus=0, target=0, lun=0, port=0
It's HIGH speed device!
Some of the INQUIRY command's response:
JetFlash TS1GJFV10 8.07
INQUIRY duration=0 millisecs, resid=60
removable = 1
port 0, sdb has 1 partition(s)
f_type 0x4d44 sdb1 sdb1 part1

device 2 is /sys/block/sdc
host=3, bus=0, target=0, lun=0, port=2
It's HIGH speed device!
open: Unknown error 159
port 2, sdc has 0 partition(s)
GetDeviceUp 0 flag : 0x1043
SetupClass::GetInstance()->GetNetEth0DHCPEnable() = 0
In my system...
sdb1 is recordable !!!!!!
sdb1 is timeshiftable !!!!!!
CMD : /sbin/ifconfig eth0 192.168.0.101 netmask 255.255.255.0 broadcast 192.168.0.255
In my system...
In my system...
insmod: cannot insert `/lib/modules/2.6.12.6-VENUS/kernel/drivers/usb/host/ehci-hcd.ko': Success (17): Success
modprobe: failed to load module ehci-hcd
insmod: cannot insert `/lib/modules/2.6.12.6-VENUS/kernel/drivers/usb/host/ohci-hcd.ko': Success (17): Success
modprobe: failed to load module ohci-hcd
In my system...
Key processed.
[HDMI]: MARS HDMI is running...
[HDMI]: Disable HDCP
[HDMI]: Hotplug Change !!! -1 -> 1
[HDMI]: HDCP_XMT_LINK_H0 T=000.000
[HDMI]: HDCP_XMT_LINK_H1 T=000.002

[HDMI]: Read_EDID ST T=000.000
[HDMI]: Set I2C Speed = 100 kHz
[HDMI]: Tx Reads EDID from Rx. ST T=000.007
[HDMI]: Tx Reads EDID from Rx. block=0
[HDMI]: Tx Reads EDID from Rx. block=1
IMSAP got usb update command ......command->type=-51
Key processed.
ETH0 CMD : /sbin/route add default gw 192.168.0.1 dev eth0
IP : 192. 168. 0. 101
SubNet : 255. 255. 255. 0
Gateway : 192. 168. 0. 1
Broadcast IP : 192. 168. 0. 255
org change count = 0 , total change count = 1
Fix IP Set OK
#### start to set ETH0 FIX IP ###
DNS IP : 8. 8. 4. 4
nameserver 8.8.4.4

[HDMI]: Tx Reads EDID from Rx. SP T=000.188
[HDMI]: EDID chksum valid!!! chksum=16384 chksum divide 256=0
[HDMI]: EDID chksum valid!!! chksum=16384 chksum divide 256=0
[HDMI]: 24-bit IEEE Registration Identifier (0x000C03) found => HDMI Device
[HDMI]: HDMI_Device=1
[HDMI]: HDMI_Device=1 => HDMI Device
[HDMI]: EDID chksum valid!!! chksum=16384 chksum divide 256=0
[HDMI]: HDMI Device
[HDMI]: Check EDID data SP ret=2 VDB data fails
[HDMI]: Invalid EDID.
[HDMI]: Content of EDID:

unsigned char edid_data[256]={
0x00,0xff,0xff,0xff,0xff,0xff,0xff,0x00,0x41,0x0c,0x30,0xd0,0x56,0x34,0x12,0x00,
0x16,0x11,0x01,0x03,0x80,0x29,0x1f,0x78,0x0a,0xf2,0x93,0xa1,0x58,0x48,0x9c,0x25,
0x12,0x4a,0x4d,0xbf,0xce,0x00,0x81,0xc0,0x8b,0xc0,0x81,0x40,0x00,0x01,0x00,0x01,
0x00,0x01,0x00,0x01,0x00,0x01,0x01,0x1d,0x80,0xd0,0x72,0x1c,0x16,0x20,0x10,0x2c,
0x25,0x80,0x98,0x32,0x11,0x00,0x00,0x9a,0x0e,0x1f,0x00,0x80,0x51,0x00,0x1e,0x30,
0x40,0x80,0x37,0x00,0x98,0x32,0x11,0x00,0x00,0x1c,0x00,0x00,0x00,0xfc,0x00,0x50,
0x48,0x4c,0x20,0x32,0x30,0x50,0x46,0x4c,0x34,0x31,0x32,0x32,0x00,0x00,0x00,0xfd,
0x00,0x32,0x3c,0x0f,0x46,0x0f,0x00,0x0a,0x20,0x20,0x20,0x20,0x20,0x20,0x01,0x30,

0x02,0x03,0x23,0xf0,0x50,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x90,0x91,0x92,0x93,
0x94,0x95,0x96,0x9f,0x80,0x23,0x09,0x7f,0x07,0x83,0x01,0x00,0x00,0x65,0x03,0x0c,
0x00,0x10,0x00,0x02,0x3a,0x80,0xd0,0x72,0x38,0x2d,0x40,0x10,0x2c,0x25,0x80,0x98,
0x32,0x11,0x00,0x00,0x1e,0xe9,0x39,0x80,0x18,0x71,0x38,0x2d,0x40,0x58,0x2c,0x25,
0x00,0x98,0x32,0x11,0x00,0x00,0x1e,0x01,0x1d,0x00,0xbc,0x52,0xd0,0x1e,0x20,0xb8,
0x28,0x55,0x40,0x98,0x32,0x11,0x00,0x00,0x1e,0xf5,0x1c,0x00,0x72,0x51,0xd0,0x1e,
0x20,0x6e,0x28,0x55,0x00,0x98,0x32,0x11,0x00,0x00,0x1e,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xc1,};

memcpy DVI_edid DVI_edid DVI_edid DVI_edid DVI_edid
[HDMI]: Read_EDID SP T=000.226

[HDMI]: parseHDMI_EDIDInfo
[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i 60Hz
[HDMI] HDMI_thread(311) call setHDMIAudioVideoFormat()
[HDMI] VID = 0x5 1080i 60Hz
[HDMI] check EDID structure !!!!
[HDMI]: TVSupportxvYCC = 0
[HDMI]: TVSupportxvYCC = 0, do not send metadata.
[HDMI]: Turn on HDMI................... 1 s_freq=0 c_cnt=0 t=321.549
[HDMI]: TVSupportYCbCr = 0
[HDMI]: NO YCbCr
[HDMI]: Disable audio setting by video.
[HDMI]: TVSupportxvYCC = 0, do not send metadata.
[HDMI]: Tell AUDIO firmware, now is HDMI_Video_Format_HD
[HDMI]: Send_Video_Format_To_Audio(1)
[HDMI]: argp.video_type=1
[HDMI]: Clear AVMute
[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i 60Hz
[HDMI]: HDMI Latency does not exist.
[HDMI]: Turn on HDMI AUDIO
Send_AudioMute AP_SETUP_HDMI_MUTE=0 Select=2 PS=0
AP_SETUP_HDMI_MUTE=0
[HDMI]: Clear HDMI Audio Mute(Turn on AUDIO)
[HDMI]: Send_AudioMute() Ok, argp.hdmi_mute=0
[HDMI]: SET_HDMI_Frequency ST vid=0x5 HDMI_Freq=2
[HDMI]: call AUDIO_RPC_ToAgent_AOUT_HDMI_Set
[HDMI]: SET_HDMI_Frequency SP vid=0x5 HDMI_Freq=2 hdmi_freq=74
[HDMI]: Setup a wider window of opportunity.
[HDMI]: HDMI_TMDS_SCR1 0x8ca0f0
[HDMI]: HDMISwitchTVSystem SP. t=321.560
[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i 60Hz
Key processed.
Key processed.
Key processed.
m_browserDevice: 1

m_browserType: 3

In my system...
In my system...
NTP, contacting time.nist.gov for time
*********** in init ,create11111111111111Table =============
NTP client has obtained time! set system....
NTP success! quit!
[Activate][1071]: No HDD found, check USB
sdb1 is recordable !!!!!!
[stopAllTask][3468]: et_get_all_task_id fail
In my system...
In my system...
[createUsbThunderDir:][3297] download path /tmp/usbmounts/sdb1
IN : /tmp/usbmounts/sdb1/ThunderDownLoad
IN : /tmp/usbmounts/sdb1/ThunderDB
In my system...
In my system...
In my system...
IN : /tmp/IMS/movie
USB is ready, try to create download db in USB
*********** in init ,create11111111111111Table =============
[Activate][1081]: Init thunder database[/tmp/IMSMETA//thunder.db] done
############### m_bIsActivate = 1
[IMSAP.cpp][threadLoadMedia][1328]: Wait for condition variable
[IMSAP.cpp][Activate][1250]: Create loadmedia thread done
Key processed.

....

2357 SetCurrentBrowserTypeChoice GNewBrowserMenu.cpp 3
2233 UpdateBrowserByForce GNewBrowserMenu.cpp 1 3
2357 SetCurrentBrowserTypeChoice GNewBrowserMenu.cpp 3
DirCreator GNewBrowserMenu.cpp /tmp/ramfs/volumes /tmp/ramfs/volumes/E:/movie
m_CurrDirName: /tmp/ramfs/volumes/E:/movie
m_CurrDirName: /tmp/ramfs/volumes/E:/movie
m_CurrDirName: /tmp/ramfs/volumes/E:/movie
DGGBrowserMenu::AllCtrlerCreator AllCtrlerCreator GNewBrowserMenu.cpp
KELLY in DGGBrowserMenu::GBrowserRefresh
the index: 0 + 2 = 2

the name: /E:/movie/Красавчик.avi

GMusicControl::~GMusicControl[GVideoControl.cpp:1093]:ShowMultiMediaInfo()- %%%%%% - !!
Key processed.
[GVideoControl.cpp:419]:DoPreview()- %%%%%% - !!
kelly show video fileName: /tmp/ramfs/volumes/E:/movie/Красавчик.avi
[GVideoControl.cpp:1456]:ShowVideoInfo()- %%%%%% - !!
[GVideoControl.cpp:812]:ClearShowInfoArea()- %%%%%% - !!
In my system...
umount: Couldn't umount /tmp/disk: No such file or directory
In my system...
[GVideoControl.cpp:205]:CheckPreviewPreparation()- %%%%%% - !!
LoadMedia () is working
rmmod: isofs: Success
start ao rpc config
start ao rpc config spdif
[GVideoControl.cpp:205]:CheckPreviewPreparation()- %%%%%% - !!
LoadMedia () is working
PPAOUT output pin is pp pin
[GVideoControl.cpp:205]:CheckPreviewPreparation()- %%%%%% - !!
LoadMedia () is working
[GVideoControl.cpp:205]:CheckPreviewPreparation()- %%%%%% - !!
LoadMedia () is working
[GVideoControl.cpp:205]:CheckPreviewPreparation()- %%%%%% - !!
>>>>>>>>>> UNKNOW EVENTCODE:0
sourceRate= 256, decodeRate= 256
*** aout pause
state force paused
state force paused
flush SPIC begin
flush SPIC end
flush AUDIO begin
flush AUDIO end
flush VIDEO begin
flush VIDEO end
flush AUDIO begin
flush AUDIO end
kelly set VIDEO_BROWSER_GET_SEQUENCE_INFO_TIMER
[AbstractAP.cpp:4815] Flow Event Code = 26
[AbstractAP.cpp:4815] Flow Event Code = 36
kelly receieve VIDEO_BROWSER_GET_SEQUENCE_INFO_TIMER
[GVideoControl.cpp:147]:TryToGetVideoSequenceInfo()- KELLYKELLY - 3 m_verticalLineCount:[576]!!
[AbstractAP.cpp:4815] Flow Event Code = 38
DirCreator GNewBrowserMenu.cpp /tmp/ramfs/volumes /tmp/ramfs/volumes/E:
m_CurrDirName: /tmp/ramfs/volumes/E:
m_CurrDirName: /tmp/ramfs/volumes/E:
m_CurrDirName: /tmp/ramfs/volumes/E:
m_CurrDirName: /tmp/ramfs/volumes/E:
m_CurrDirName: /tmp/ramfs/volumes/E:
m_CurrDirName: /tmp/ramfs/volumes/E:
GVideoControl::~GVideoControl
state force paused
state force paused
state force stoped
enter audio stop
enter audio stop -- leave block
state force stoped
Stopping
leave Stopping
In my system...
umount: Couldn't umount /tmp/disk: No such file or directory
In my system...
rmmod: isofs: Success
Tear Down playback flow
[VideoPlayback.cpp:355]remove navi.
[VideoPlayback.cpp:361]remove navi. ok
(rowTotal, rowShowingStart, rowShowingLength): (8, 0, 6)
retval: 0


Key processed.

Единственное о чем могу непрофессионально судить просмотрев такое большое количество букаф и сравнив их с логом из предыдущей прошивки (АМР r8). На родной прошивке HDMI определился как-то по другому. Объясните, плиз, что конкретно влияет на то, что в этой прошивке звук по HDMI есть?

[Sekator500]

При EDID_FAIL система считает телек монитором, в двух случаях у тебя провал только в родной прошивке это либо игнорируется либо стоит более глубокий детектор.

Как вариант исправлять dvdplayer по средствам ассемблера.

[Virtual]

только в родной прошивке это либо игнорируется либо стоит более глубокий детектор.

согласно логу в родной прошивке тупо игнорируется что DVI монитор...

ибо

[HDMI]: Disable audio setting by video.
[HDMI]: TVSupportxvYCC = 0, do not send metadata.
[HDMI]: Tell AUDIO firmware, now is HDMI_Video_Format_HD
[HDMI]: Send_Video_Format_To_Audio(1)
[HDMI]: argp.video_type=1
[HDMI]: Clear AVMute
[HDMI]: GetVidNameByTV => VIDEO_HD1080_60HZ VIDEO_INTERLACED => 1080i 60Hz
[HDMI]: HDMI Latency does not exist.
[HDMI]: Turn on HDMI AUDIO
Send_AudioMute AP_SETUP_HDMI_MUTE=0 Select=2 PS=0
AP_SETUP_HDMI_MUTE=0
[HDMI]: Clear HDMI Audio Mute(Turn on AUDIO)
[HDMI]: Send_AudioMute() Ok, argp.hdmi_mute=0

ЗЫ помнится при переходе на SDK4 были случаи что народ жаловался.... про проблемы с HDMI везде виновник - телик .

ЗЫЗЫ но в сдк4 тож это недоделано .... имхо проще обьяснить телику чтоб он перестал ся считать DVI монитором.