help с BBK MP060S

о железе плеера и о периферии

Re: help с BBK MP060S

Postby podvodnik23 » 26 Sep 2011, 23:35

sliky wrote:шнурок разобрал, но чтото не могу понять какой из них Rx и Tx.... на одном вроде 3.3В относительно земли, на другом вроде 0

Выводы микросхемы: 1-TXD, 5-RXD, 7-Масса
Схема | +
usb-to-TTL.gif
usb-to-TTL.gif (11.9 KiB) Viewed 3764 times
PBO Core(amp r13 vrtn)+WD320,PBO Core(amp r9 скин HD2 blue)-умер от пыток :mrgreen: Iconbit XDS1003D(xds1003d_10221_r2)+Toshiba 1Tb
User avatar
podvodnik23
 
Posts: 381
Joined: 05 Jun 2011, 11:39
Location: Киев

Re: help с BBK MP060S

Postby sliky » 27 Sep 2011, 00:05

т.е. я должен контакт Rx провода припаять к площадке Тх платы и наоборот + GND?
sliky
 
Posts: 19
Joined: 02 Sep 2011, 01:07

Re: help с BBK MP060S

Postby FarVoice » 27 Sep 2011, 00:11

вау!
Gnd всяка на землю плеера!
А Tx и Rx пробуй :) Советую припаять к площадкам проводочки и уже к ним прикручивать провода от кабеля.
И не забудь настроить порт в виндозе!
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: help с BBK MP060S

Postby sliky » 27 Sep 2011, 21:33

все подцепил, включил... а дальше что делать то?)
лог Путти:
| +
Code: Select all
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.09.27 21:28:53 =~=~=~=~=~=~=~=~=~=~=~=

?hello  world!
5528280 0wa itwaiA~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A~A
REALTEK ROM Monitor, Revision 0000.0202.0019.
Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved.

For a list of available commands, type 'help'.

Compilation time /version=      May 19 2010  14:09:40  /0000.0202.0019

MAC address =                   00.26.03.10.08.93

Processor Company ID/options =  0x01 (MIPS Technologies, Inc.) / 0x00

Processor ID/revision =         0x93 / 0x78

Endianness =                    Little
Flash memory size =             256 MByte

SDRAM size =                    128 MByte

First free SDRAM address =      0x800f8900


Press 'ESC' to Monitor mode

Linux Kernel:

   FW Image from 0xa2040000, to 0x80100000, size=0x403085

Audio FW:

   FW Image from 0xa2460000, to 0x81b00000, size=0x1c99c8

Video FW:

   FW Image from 0xa2640000, to 0x81d80000, size=0x2369c0

PAL logo

5280Go 5280Go go 0x80100000 mtdparts=rtk_nand:25088k,207616k(/),16384k(/usr/local/etc),13056k rootfstype=yaffs2 root=31:01

Reset Ethernet Mac.




Address = 0x80100000


Realtek LINUX (DC ALIAS) started...
Venus setting:
   ROSs have 2621440 bytes RAM.
   System CPU has 2 UARTs.
   System CPU uses external timer interrupt.
   Bootloader version: 0000.0202.0019. This version string is of new format.
Error! Unknown SB2_CHIP_INFO. Linux is too old?
   Ethernet Mac address: 00.26.03.10.08.93
   Model Config length=0
Base year of RTC is 2010.
Config serial console: console=ttyS0,115200n8r
prom_flashsize = 0x10000000
Linux version 2.6.12.6-VENUS (root@localhost.localdomain) (gcc version 3.4.4 mipssde-6.03.01-20051114) #323636 Tue Sep 21 17:00:40 CST 2010

audio addr: 1b00000

CPU revision is: 00019378

Determined physical RAM map:

 memory: 00100000 @ 00000000 (usable)

 memory: 00421000 @ 00100000 (reserved)

 memory: 015df000 @ 00521000 (usable)

 memory: 00500000 @ 01b00000 (reserved)

 memory: 06000000 @ 02000000 (usable)

  show info: max_low_pfn:32768

  show info: min_low_pfn:1313

ZONE: DMA, PFN: 0

ZONE: DVR, PFN: 8192

Built 1 zonelists

Kernel command line: mtdparts=rtk_nand:25088k,207616k(/),16384k(/usr/local/etc),13056k rootfstype=yaffs2 root=31:01 console=ttyS0,115200n8r ip=192.168.0.9::192.168.0.254:255.0.0.0:::

Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.

Primary data cache 32kB, 4-way, linesize 32 bytes.

Synthesized TLB refill handler (20 instructions).

Synthesized TLB load handler fastpath (32 instructions).

Synthesized TLB store handler fastpath (32 instructions).

Synthesized TLB modify handler fastpath (31 instructions).

Cache parity protection disabled

PID hash table entries: 256 (order: 8, 4096 bytes)

Estimate value: CPU frequency 405.02 MHz

Using 27.000 MHz high precision timer.

Console: colour dummy device 80x25

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 119552k/121724k available (3387k kernel code, 2112k reserved, 577k data, 144k init, 0k highmem)

Warning! Unknown board id.

==================== Warning! The calculated loops_per_jiffy is not similar to the default one. ====================

Mount-cache hash table entries: 512

Checking for 'wait' instruction...  available.

========== board id: 202 ==========

[INFO] neptune mode...

boot_param value: a0002800

mode: 1

Se logo mode to PAL

size: 1613

color1: 0x63c44e

color2: 0x6fa88e

color3: 0x7b8dcb

color4: 0x8080eb

NET: Registered protocol family 16

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

se init module major number = 254

size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52...

[user land] CmdBuf virt addr = 80658000/a0658000, phy addr=00658000

   Hello, Realtek TLB Mapper

   AllocBP size: 294912 order: 7

   <<<DVR FREE AREA>>>

   0:   0

   1:   0

   2:   0

   3:   0

   4:   0

   5:   0

   6:   0

   7:   0

   8:   0

   9:   0

   10:   0

   11:   0

   12:   6

      Addr: 87000000, order: 12

      Addr: 86000000, order: 12

      Addr: 85000000, order: 12

      Addr: 84000000, order: 12

      Addr: 83000000, order: 12

      Addr: 82000000,

[Audio Firmware Version] 333439
[Binary src compiled at] Aug 31 2010 17:23:54

 order: 12

squashfs: version 3.1 (2006/08/19) Phillip Lougher

devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.

YAFFS Driver Rev:292241 (2010-01-19)

YAFFS Driver is successfully installing.

Initializing Cryptographic API

Generic RTC Driver v1.07

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

ttyS0 at MMIO 0x0 (irq = 3) is a 16550A

ttyS1 at MMIO 0x0 (irq = 3) is a 16550A

io scheduler noop registered

RAMDISK driver initialized: 1 RAM disks of 128K size 1024 blocksize

loop: loaded (max 8 devices)

this  MARS eth RX_OFFSET = 0x0

8139cplus: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)

MAC address = 0x00.26.03.10.08.93

eth0: RTL-8139C+ at 0xb8016000, 00:26:03:10:08:93, IRQ 2

PPP generic driver version 2.4.2

PPP Deflate Compression module registered

PPP BSD Compression module registered

NET: Registered protocol family 24

VenusSFC MTD init

cp_hotplug

serial flash inaccessible

physmap flash device: 10000000 at fd00000

Realtek NAND Flash Driver Rev:317223 (2010-06-01)

One HY27UF082G2B chip has 1 die(s) on board

nand part=HY27UF082G2B, id=adda1095, device_size=268435456, chip_size=268435456, num_chips=1, isLastPage=0

[rtk_nand_scan_bbt] have created bbt B0, just loads it !!

[dump_BBT] Nand BBT Content

Congratulation!! No BBs in this Nand.

4 cmdlinepart partitions found on MTD device rtk_nand

RTK: using dynamic nand partition

Creating 4 MTD partitions on "rtk_nand":

0x00000000-0x01880000 : "Partition_000"

0x01880000-0x0e340000 : "/"

0x0e340000-0x0f340000 : "/usr/local/etc"

0x0f340000-0x10000000 : "Partition_003"

0x00000000-0x10000000 : "disc"

Realtek Nand Flash Driver is successfully installing.

Initializing USB Mass Storage driver...

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

mice: PS/2 mouse device common for all mice

i2c /dev entries driver

[I2C0] i2c speed changed to 100 KHz

I2C0 Bus Status Check.... OK

=========================

= VER : 2.1b

=========================

= PHY : 0

= MODE: MARS/JUPITER

= SPD : 100

= SAR : 0x024 (7 bits)

= TX FIFO DEPTH : 8

= RX FIFO DEPTH : 8

= FIFO THRESHOLD: 4

= BUS JAM RECORVER 3: ON

= NON STOP WRITE : ON

= GPIO RW SUPPORT : ON

=========================

FATAL : I2C 1 pins have been occupied by PCI

Trying to free free IRQ3

NET: Registered protocol family 2

IP: routing cache hash table of 1024 buckets, 8Kbytes

TCP established hash table entries: 8192 (order: 4, 65536 bytes)

TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

TCP: Hash tables configured (established 8192 bind 8192)

NET: Registered protocol family 1

NET: Registered protocol family 17

Realtek Venus Power Management, (c) 2006 Realtek Semiconductor Corp.

cp_open

alloc rings cp->rxdesc_buf =0xa19a5000 , cp->ring_dma=0x19a5000

init_hw

init_hw finished

IP-Config: Complete:

      device=eth0, addr=192.168.0.9, mask=255.0.0.0, gw=192.168.0.254,

     host=192.168.0.9, domain=, nis-domain=(none),

     bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=

yaffs: dev is 32505857 name is "mtdblock1"

yaffs: Attempting MTD mount on 31.1, "mtdblock1"

RTK rtc cannot work.

yaffs: restored from checkpoint

VFS: Mounted root (yaffs2 filesystem) readonly.

Mounted devfs on /dev

Freeing prom memory: 0kb freed

Reclaim bootloader memory from 80020000 to 80100000

Freeing unused kernel memory: 144k freed

Welcome to Realtek Linux

Please press Enter to activate this console. yaffs: dev is 32505858 name is "mtdblock2"

yaffs: Attempting MTD mount on 31.2, "mtdblock2"

[mtdblock_release] Done

------flush priority: 10

flush_page_cache: do flush...

------flush priority: 10

flush_page_cache: do flush...

------flush priority: 10

flush_page_cache: do flush...

[mtdblock_release] Done

[mtdblock_release] Done

[mtdblock_release] Done

yaffs: dev is 32505858 name is "mtdblock2"

yaffs: Attempting MTD mount on 31.2, "mtdblock2"

yaffs: auto selecting yaffs2

[mtdblock_release] Done

yaffs: dev is 32505858 name is "mtdblock2"

yaffs: Attempting MTD mount on 31.2, "mtdblock2"

[mtdblock_release] Done

Starting INET services....
Press 'ESC' to Monitor mode
Linux Kernel:


BusyBox v1.1.3 (2010.06.24-09:31+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

/ # Linux Kernel:
-sh: Linux: not found
/ #         FW Image from 0xa2040000, to 0x80100000, size=0x403085
-sh: FW: not found
/ # Audio FW:
-sh: Audio: not found
/ #         FW Image from 0xa2460000, to 0x81b00000, size=0x1c99c8
-sh: FW: not found
/ # Video FW:
-sh: Video: not found
/ #         FW Image from 0xa2640000, to 0x81d80000, size=0x2369c0
-sh: FW: not found
/ # PAL logo
-sh: PAL: not found
/ # 5280Go 5280Go go 0x80100000 mtdparts=rtk_nand:25088k,207616k(/),16384k(/usr/ local/etc),13056k rootfstype=yaffs2 root=31:01
-sh: Syntax error: "(" unexpected
/ # Reset Ethernet Mac.
-sh: Reset: not found
/ #
/ #
/ # Address = 0x80100000
-sh: Address: not found
/ #
/ # Realtek LINUX (DC ALIAS) started...
-sh: Syntax error: "(" unexpected
/ # Venus setting:
-sh: Venus: not found
/ #         ROSs have 2621440 bytes RAM.
-sh: ROSs: not found
/ #         System CPU has 2 UARTs.
-sh: System: not found
/ #         System CPU uses external timer interrupt.
-sh: System: not found
/ #         Bootloader version: 0000.0202.0019. This version string is of new fo rmat.
-sh: Bootloader: not found
/ # Error! Unknown SB2_CHIP_INFO. Linux is too old?
-sh: Error!: not found
/ #         Ethernet Mac address: 00.26.03.10.08.93
-sh: Ethernet: not found
/ #         Model Config length=0
-sh: Model: not found
/ # Base year of RTC is 2010.
-sh: Base: not found
/ # Config serial console: console=ttyS0,115200n8r
-sh: Config: not found
/ # prom_flashsize = 0x10000000
-sh: prom_flashsize: not found
/ # Linux version 2.6.12.6-VENUS (root@localhost.localdomain) (gcc version 3.4.4  mipssde-6.03.01-20051114) #323636 Tue Sep 21 17:00:40 CST 2010
-sh: Syntax error: "(" unexpected
/ # audio addr: 1b00000
-sh: audio: not found
/ # CPU revision is: 00019378
-sh: CPU: not found
/ # Determined physical RAM map:
-sh: Determined: not found
/ #  memory: 00100000 @ 00000000 (usable)
-sh: Syntax error: "(" unexpected
/ #  memory: 00421000 @ 00100000 (reserved)
-sh: Syntax error: "(" unexpected
/ #  memory: 015df000 @ 00521000 (usable)
-sh: Syntax error: "(" unexpected
/ #  memory: 00500000 @ 01b00000 (reserved)
-sh: Syntax error: "(" unexpected
/ #  memory: 06000000 @ 02000000 (usable)
-sh: Syntax error: "(" unexpected
/ #   show info: max_low_pfn:32768
-sh: show: not found
/ #   show info: min_low_pfn:1313
-sh: show: not found
/ # ZONE: DMA, PFN: 0
-sh: ZONE:: not found
/ # ZONE: DVR, PFN: 8192
-sh: ZONE:: not found
/ # Built 1 zonelists
-sh: Built: not found
/ # Kernel command line: mtdparts=rtk_nand:25088k,207616k(/),16384k(/usr/local/e tc),13056k rootfstype=yaffs2 root=31:01 console=ttyS0,115200n8r ip=192.168.0.9:: 192.168.0.254:255.0.0.0:::
-sh: Syntax error: "(" unexpected
/ # Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. -sh: Primary: not found
/ # Primary data cache 32kB, 4-way, linesize 32 bytes.
-sh: Primary: not found
/ # Synthesized TLB refill handler (20 instructions).
-sh: Syntax error: "(" unexpected
/ # Synthesized TLB load handler fastpath (32 instructions).
-sh: Syntax error: "(" unexpected
/ # Synthesized TLB store handler fastpath (32 instructions).
-sh: Syntax error: "(" unexpected
/ # Synthesized TLB modify handler fastpath (31 instructions).
-sh: Syntax error: "(" unexpected
/ # Cache parity protection disabled
-sh: Cache: not found
/ # PID hash table entries: 256 (order: 8, 4096 bytes)
-sh: Syntax error: "(" unexpected
/ # Estimate value: CPU frequency 405.02 MHz
-sh: Estimate: not found
/ # Using 27.000 MHz high precision timer.
-sh: Using: not found
/ # Console: colour dummy device 80x25
-sh: Console:: not found
/ # Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
-sh: Syntax error: "(" unexpected
/ # Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
-sh: Syntax error: "(" unexpected
/ # Memory: 119552k/121724k available (3387k kernel code, 2112k reserved, 577k d ata, 144k init, 0k highmem)
-sh: Syntax error: "(" unexpected
/ # Warning! Unknown board id.
-sh: Warning!: not found
/ # ==================== Warning! The calculated loops_per_jiffy is not similar  to the default one. ====================
-sh: ====================: not found
/ # Mount-cache hash table entries: 512
-sh: Mount-cache: not found
/ # Checking for 'wait' instruction...  available.
-sh: Checking: not found
/ # ========== board id: 202 ==========
-sh: ==========: not found
/ # [INFO] neptune mode...
-sh: [INFO]: not found
/ # boot_param value: a0002800
-sh: boot_param: not found
/ # mode: 1
-sh: mode:: not found
/ # Se logo mode to PAL
-sh: Se: not found
/ # size: 1613
-sh: size:: not found
/ # color1: 0x63c44e
-sh: color1:: not found
/ # color2: 0x6fa88e
-sh: color2:: not found
/ # color3: 0x7b8dcb
-sh: color3:: not found
/ # color4: 0x8080eb
-sh: color4:: not found
/ # NET: Registered protocol family 16
-sh: NET:: not found
/ # SCSI subsystem initialized
-sh: SCSI: not found
/ # usbcore: registered new driver usbfs
-sh: usbcore:: not found
/ # usbcore: registered new driver hub
-sh: usbcore:: not found
/ # se init module major number = 254
-sh: se: not found
/ # size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52...
-sh: size: not found
/ # [user land] CmdBuf virt addr = 80658000/a0658000, phy addr=00658000
-sh: [user: not found
/ #    Hello, Realtek TLB Mapper
-sh: Hello,: not found
/ #    AllocBP size: 294912 order: 7
-sh: AllocBP: not found
/ #         <<<DVR FREE AREA>>>
-sh: Syntax error: redirection unexpected
/ #         0:      0
-sh: 0:: not found
/ #         1:      0
-sh: 1:: not found
/ #         2:      0
-sh: 2:: not found
/ #         3:      0
-sh: 3:: not found
/ #         4:      0
-sh: 4:: not found
/ #         5:      0
-sh: 5:: not found
/ #         6:      0
-sh: 6:: not found
/ #         7:      0
-sh: 7:: not found
/ #         8:      0
-sh: 8:: not found
/ #         9:      0
-sh: 9:: not found
/ #         10:     0
-sh: 10:: not found
/ #         11:     0
-sh: 11:: not found
/ #         12:     6
-sh: 12:: not found
/ #                 Addr: 87000000, order: 12
-sh: Addr:: not found
/ #                 Addr: 86000000, order: 12
-sh: Addr:: not found
/ #                 Addr: 85000000, order: 12
-sh: Addr:: not found
/ #                 Addr: 84000000, order: 12
-sh: Addr:: not found
/ #                 Addr: 83000000, order: 12
-sh: Addr:: not found
/ #                 Addr: 82000000,
-sh: Addr:: not found
/ #
/ # [Audio Firmware Version] 333439
-sh: [Audio: not found
/ # [Binary src compiled at] Aug 31 2010 17:23:54
-sh: [Binary: not found
/ #
/ #  order: 12
-sh: order:: not found
/ # squashfs: version 3.1 (2006/08/19) Phillip Lougher
-sh: Syntax error: "(" unexpected
/ # devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
-sh: Syntax error: "(" unexpected
/ # devfs: boot_options: 0x1
-sh: devfs:: not found
/ # JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
-sh: Syntax error: "(" unexpected
/ # YAFFS Driver Rev:292241 (2010-01-19)
-sh: Syntax error: "(" unexpected
/ # YAFFS Driver is successfully installing.
-sh: YAFFS: not found
/ # Initializing Cryptographic API
-sh: Initializing: not found
/ # Generic RTC Driver v1.07
-sh: Generic: not found
/ # Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
-sh: Serial:: not found
/ # ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
-sh: Syntax error: "(" unexpected
/ # ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
-sh: Syntax error: "(" unexpected
/ # io scheduler noop registered
-sh: io: not found
/ # RAMDISK driver initialized: 1 RAM disks of 128K size 1024 blocksize
-sh: RAMDISK: not found
/ # loop: loaded (max 8 devices)
-sh: Syntax error: "(" unexpected
/ # this  MARS eth RX_OFFSET = 0x0
-sh: this: not found
/ # 8139cplus: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
-sh: Syntax error: "(" unexpected
/ # MAC address = 0x00.26.03.10.08.93
-sh: MAC: not found
/ # eth0: RTL-8139C+ at 0xb8016000, 00:26:03:10:08:93, IRQ 2
-sh: eth0:: not found
/ # PPP generic driver version 2.4.2
-sh: PPP: not found
/ # PPP Deflate Compression module registered
-sh: PPP: not found
/ # PPP BSD Compression module registered
-sh: PPP: not found
/ # NET: Registered protocol family 24
-sh: NET:: not found
/ # VenusSFC MTD init
-sh: VenusSFC: not found
/ # cp_hotplug
-sh: cp_hotplug: not found
/ # serial flash inaccessible
-sh: serial: not found
/ # physmap flash device: 10000000 at fd00000
-sh: physmap: not found
/ # Realtek NAND Flash Driver Rev:317223 (2010-06-01)
-sh: Syntax error: "(" unexpected
/ # One HY27UF082G2B chip has 1 die(s) on board
-sh: Syntax error: "(" unexpected
/ # nand part=HY27UF082G2B, id=adda1095, device_size=268435456, chip_size=268435 456, num_chips=1, isLastPage=0
-sh: nand: not found
/ # [rtk_nand_scan_bbt] have created bbt B0, just loads it !!
-sh: [rtk_nand_scan_bbt]: not found
/ # [dump_BBT] Nand BBT Content
-sh: [dump_BBT]: not found
/ # Congratulation!! No BBs in this Nand.
-sh: Congratulation!!: not found
/ # 4 cmdlinepart partitions found on MTD device rtk_nand
-sh: 4: not found
/ # RTK: using dynamic nand partition
-sh: RTK:: not found
/ # Creating 4 MTD partitions on "rtk_nand":
-sh: Creating: not found
/ # 0x00000000-0x01880000 : "Partition_000"
-sh: 0x00000000-0x01880000: not found
/ # 0x01880000-0x0e340000 : "/"
-sh: 0x01880000-0x0e340000: not found
/ # 0x0e340000-0x0f340000 : "/usr/local/etc"
-sh: 0x0e340000-0x0f340000: not found
/ # 0x0f340000-0x10000000 : "Partition_003"
-sh: 0x0f340000-0x10000000: not found
/ # 0x00000000-0x10000000 : "disc"
-sh: 0x00000000-0x10000000: not found
/ # Realtek Nand Flash Driver is successfully installing.
-sh: Realtek: not found
/ # Initializing USB Mass Storage driver...
-sh: Initializing: not found
/ # usbcore: registered new driver usb-storage
-sh: usbcore:: not found
/ # USB Mass Storage support registered.
-sh: USB: not found
/ # mice: PS/2 mouse device common for all mice
-sh: mice:: not found
/ # i2c /dev entries driver
-sh: i2c: not found
/ # [I2C0] i2c speed changed to 100 KHz
-sh: [I2C0]: not found
/ # I2C0 Bus Status Check.... OK
-sh: I2C0: not found
/ # =========================
-sh: =========================: not found
/ # = VER : 2.1b
-sh: =: not found
/ # =========================
-sh: =========================: not found
/ # = PHY : 0
-sh: =: not found
/ # = MODE: MARS/JUPITER
-sh: =: not found
/ # = SPD : 100
-sh: =: not found
/ # = SAR : 0x024 (7 bits)
-sh: Syntax error: "(" unexpected
/ # = TX FIFO DEPTH : 8
-sh: =: not found
/ # = RX FIFO DEPTH : 8
-sh: =: not found
/ # = FIFO THRESHOLD: 4
-sh: =: not found
/ # = BUS JAM RECORVER 3: ON
-sh: =: not found
/ # = NON STOP WRITE : ON
-sh: =: not found
/ # = GPIO RW SUPPORT : ON
-sh: =: not found
/ # =========================
-sh: =========================: not found
/ # FATAL : I2C 1 pins have been occupied by PCI
-sh: FATAL: not found
/ # Trying to free free IRQ3
-sh: Trying: not found
/ # NET: Registered protocol family 2
-sh: NET:: not found
/ # IP: routing cache hash table of 1024 buckets, 8Kbytes
-sh: IP:: not found
/ # TCP established hash table entries: 8192 (order: 4, 65536 bytes)
-sh: Syntax error: "(" unexpected
/ # TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
-sh: Syntax error: "(" unexpected
/ # TCP: Hash tables configured (established 8192 bind 8192)
-sh: Syntax error: "(" unexpected
/ # NET: Registered protocol family 1
-sh: NET:: not found
/ # NET: Registered protocol family 17
-sh: NET:: not found
/ # Realtek Venus Power Management, (c) 2006 Realtek Semiconductor Corp.
-sh: Syntax error: "(" unexpected
/ # cp_open
-sh: cp_open: not found
/ # alloc rings cp->rxdesc_buf =0xa19a5000 , cp->ring_dma=0x19a5000
-sh: cannot create rxdesc_buf: Read-only file system
-sh: alloc: not found
/ # init_hw
-sh: init_hw: not found
/ # init_hw finished
-sh: init_hw: not found
/ # IP-Config: Complete:
-sh: IP-Config:: not found
/ #       device=eth0, addr=192.168.0.9, mask=255.0.0.0, gw=192.168.0.254,
/ #      host=192.168.0.9, domain=, nis-domain=(none),
-sh: Syntax error: "(" unexpected
/ #      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
/ # yaffs: dev is 32505857 name is "mtdblock1"
-sh: yaffs:: not found
/ # yaffs: Attempting MTD mount on 31.1, "mtdblock1"
-sh: yaffs:: not found
/ # RTK rtc cannot work.
-sh: RTK: not found
/ # yaffs: restored from checkpoint
-sh: yaffs:: not found
/ # VFS: Mounted root (yaffs2 filesystem) readonly.
-sh: Syntax error: "(" unexpected
/ # Mounted devfs on /dev
-sh: Mounted: not found
/ # Freeing prom memory: 0kb freed
-sh: Freeing: not found
/ # Reclaim bootloader memory from 80020000 to 80100000
-sh: Reclaim: not found
/ # Freeing unused kernel memory: 144k freed
-sh: Freeing: not found
/ # Welcome to Realtek Linux
-sh: Welcome: not found
/ #
/ # Please press Enter to activate this console. yaffs: dev is 32505858 name is  "mtdblock2"
-sh: Please: not found
/ # yaffs: Attempting MTD mount on 31.2, "mtdblock2"
-sh: yaffs:: not found
/ # [mtdblock_release] Done
-sh: [mtdblock_release]: not found
/ # ------flush priority: 10
-sh: ------flush: not found
/ # flush_page_cache: do flush...
-sh: flush_page_cache:: not found
/ # ------flush priority: 10
-sh: ------flush: not found
/ # flush_page_cache: do flush...
-sh: flush_page_cache:: not found
/ # ------flush priority: 10
-sh: ------flush: not found
/ # flush_page_cache: do flush...
-sh: flush_page_cache:: not found
/ # [mtdblock_release] Done
-sh: [mtdblock_release]: not found
/ # [mtdblock_release] Done
-sh: [mtdblock_release]: not found
/ # [mtdblock_release] Done
-sh: [mtdblock_release]: not found
/ # yaffs: dev is 32505858 name is "mtdblock2"
-sh: yaffs:: not found
/ # yaffs: Attempting MTD mount on 31.2, "mtdblock2"
-sh: yaffs:: not found
/ # yaffs: auto selecting yaffs2
-sh: yaffs:: not found
/ # [mtdblock_release] Done
-sh: [mtdblock_release]: not found
/ # yaffs: dev is 32505858 name is "mtdblock2"
-sh: yaffs:: not found
/ # yaffs: Attempting MTD mount on 31.2, "mtdblock2"
-sh: yaffs:: not found
/ # [mtdblock_release] Done
-sh: [mtdblock_release]: not found
/ # Starting INET services....
-sh: Starting: not found
/ #
sliky
 
Posts: 19
Joined: 02 Sep 2011, 01:07

Re: help с BBK MP060S

Postby FarVoice » 27 Sep 2011, 21:44

ну и всё зашибись :)
ты в телнете :)

Два раза надави ввод - будет приглашение.
А дальше - Soft reset, флеху с прошивкой в USB и передёрни питалово.

Кст, он у тебя пытается грузицца, т.е. не совсем помер, а какая-то система во флеше осталась. Кривая, правда.
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: help с BBK MP060S

Postby FarVoice » 27 Sep 2011, 21:45

FarVoice wrote:ну и всё зашибись :)
ты в телнете :)

Два раза надави ввод - будет приглашение.
А дальше - Soft reset, флеху с прошивкой в USB и передёрни питалово.

А можно включить с нажатой ESC - попадёшь в реалтек монитор. Там делаешь erase -m а дальше - флеху с прошивкой в USB и передёрни питалово :)

Кст, он у тебя пытается грузицца, т.е. не совсем помер, а какая-то система во флеше осталась. Кривая, правда.
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: help с BBK MP060S

Postby sliky » 27 Sep 2011, 21:48

FarVoice wrote:ну и всё зашибись :)
ты в телнете :)

Два раза надави ввод - будет приглашение.
А дальше - Soft reset, флеху с прошивкой в USB и передёрни питалово.

Кст, он у тебя пытается грузицца, т.е. не совсем помер, а какая-то система во флеше осталась. Кривая, правда.


эммм.. ESC или Enter?)) в соседней темке эск нажимают...)
sliky
 
Posts: 19
Joined: 02 Sep 2011, 01:07

Re: help с BBK MP060S

Postby FarVoice » 27 Sep 2011, 21:54

sliky wrote:эммм.. ESC или Enter?)) в соседней темке эск нажимают...)

Я имел ввиду, если не нажимать ESC при включении, то два раза ентер и ты в линухе
А если включить с нажатой ESC то ты будешь в реалтек мониторе.
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: help с BBK MP060S

Postby sliky » 27 Sep 2011, 22:38

всем огромное спасибо!!!!!! плеер перепрошился и заработал... юху :!: )
sliky
 
Posts: 19
Joined: 02 Sep 2011, 01:07

Previous

Return to Hardware

Who is online

Users browsing this forum: No registered users and 20 guests

cron