Восстановление при самой неудачной прошивке Mars(1073/1283)

о железе плеера и о периферии

Re: Восстановление при самой неудачной прошивке Mars(1073/12

Postby Virtual » 02 Dec 2022, 21:07

приятного просмотра контента, хотя вы уж поняли что этот плеер не просто плеер а полноценный комп, и его актуальность в плане воспроизведения медия не угался за 12 лет, как и в плане лайтовой версии NAS сервера :ugeek:
марсы: HDS7 (смотрелка AMP скин vrt )
HDR12 AMP (обычно сервер с RAM 256 и 2 SATA диска 2T+)//но очень иногда оцифровка видео
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.90 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6862
Joined: 01 Oct 2010, 17:17
Location: RU

Re: Ядро AMP r13

Postby andree75 » 19 Mar 2024, 08:29

Прошу помощи. Плеер Egreat R1 на чипе 1073, прошивка на ядре r13 vrtn42. При включении появляется окно загрузки и висит, больше ничего не происходит. Пробовал перепрошиться через кнопку - не получается, вообще никакой реакции. До этого работал стабильно на этой прошивке.
Egreat R1, SATA 1TB, AMP r13 vrtn42
andree75
 
Posts: 8
Joined: 11 Dec 2015, 20:07

Re: Ядро AMP r13

Postby andree75 » 19 Mar 2024, 19:16

Прилагаю config с гипертерминала. Никакие команды ввести не получается.
Code: Select all
 host=192.168.0.9, domain=, nis-domain=(none),
     bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
yaffs: dev is 32505857 name is "mtdblock1"
yaffs: Attempting MTD mount on 31.1, "mtdblock1"
RTK rtc can work.
yaffs: restored from checkpoint
VFS: Mounted root (yaffs2 filesystem) readonly.
Mounted devfs on /dev
Freeing prom memory: 0kb freed
Reclaim bootloader memory from 80020000 to 80100000
Freeing unused kernel memory: 144k freed
Welcome to Realtek Linux

Please press Enter to activate this console. yaffs: dev is 32505858 name is "mtd
block2"
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
Starting INET services....
[usb_param] setting for mars
Setting for MARS-B
[usb_param] set port two for host!
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 1 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 2 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_39(417) tx_delay 1
[usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
[usb2_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
ehci_hcd ehci_hcd: EHCI Host Controller
ehci_hcd ehci_hcd: new USB bus registered, assigned bus number 1
ehci_hcd ehci_hcd: irq 2, io mem 0xb8013000
ehci_hcd ehci_hcd: park 0
ehci_hcd ehci_hcd: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub : individual port power switching
hub : individual port over-current protection
[cfyeh] set PPE = 0
[usb_param] setting for mars
Setting for MARS-B
[usb_param] set port two for host!
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 1 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 2 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_39(417) tx_delay 1
[usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
[usb2_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
ohci_hcd ohci_hcd: OHCI Host Controller
ohci_hcd ohci_hcd: new USB bus registered, assigned bus number 2
ohci_hcd ohci_hcd: irq 2, io mem 0xb8013400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub : no power switching (usb 1.0)
hub : no over-current protection
usb 1-1: new high speed USB device using ehci_hcd and address 2
scsi0 : SCSI emulation for USB Mass Storage devices
dd: can't open '/Test.fat': No such file or directory
mount: mounting /dev/rd/0 on /mnt/rd failed: Invalid argument
swapon: can't stat '/mnt/rd/swap.img': No such file or directory
Hotplug got one USB Hotplug of "Add" from port "1".
x_io mod (C)Virtual, ver:1.0.0.4.
get GPIO:49 = 1
set GPIO:49,0
get GPIO:47 = 1
set GPIO:47,0
get GPIO:4C = 1
set GPIO:4C,0
get GPIO:4B = 1
set GPIO:4B,1
get GPIO:2B = 0
set GPIO:2B,1
New Venus IR driver loaded
Date Time syncronization...
Starting spindown service...
Starting lighttp service...
Running dvdplayer with RootApp
set corepath: /tmp/hdd/volumes/HDD1/
libata version 1.12 loaded..
sata driver initial...2009/12/30 14:50
sata driver patched 2013/02/07 (Virtual)
mars_init_sata(1270)dev_addr:c00611f0
RootApp AVHDD version...
ata_device_add(4893)probe begin
scsi1 : SATA_DRV
sata dma reset
enter 2nd case...
================================================
================================================
root execute DvdPlayer...
================================================
================================================
IN : /tmp/ramfs/smb
[Dlna DMR] this is GDlnaMediaRendererAP
CMD: mkdir -p /tmp/netb/smb
In my system...
downloader 0 starts, 0x1593d08
downloader 1 starts, 0x15943c8
CMD: mkdir -p /tmp/smb
In my system...
CMD: ifconfig > /tmp/netb/samba_my_ip
In my system...
Warning!! the Mask is 1.
In my system...
GrandMa Revision: v6.36
!!!BootUP!!!
***128MB version...
   Memory address 0x40000000
Bootup t3 = 1262304009.635 sec
--- RtkBootUP(84): 8.849 sec
 0X00000002
sata1: no device found (phy stat 00000000)
sata1: ata_bus_probe failed
scsi2 : SATA_DRV
sata dma reset
+++ ALLOC index: 20480 order: 8
1. start remap DVR zone 87000000(805fc000) 256...
map_done is 0...
start[0-3] = {7001a500, 7001a504, 7001a508, 7001a50c}
end[0-3] = {7001a510, 7001a514, 7001a518, 7001a51c}
+++ ALLOC index: 20992 order: 9
1. start remap DVR zone 87200000(80600000) 512...
map_done is 0...
Video DebugMem PVIDEO_RPC_SetDebugMemory Called!+++ ALLOC index: 20736 order: 7

hysical Address = 0x9d3800
1. start remap DVR zone 87100000(805fe000) 128...
map_done is 0...
+++ ALLOC index: 20864 order: 7
1. start remap DVR zone 87180000(805ff000) 128...
map_done is 0...
+++ ALLOC index: 21504 order: 8
1. start remap DVR zone 87400000(80604000) 256...
map_done is 0...
[AUDIO WARNING]
 no more memory , do Remote Malloc. Size  0x00186008
683 loadThemeSetting resource.cpp
No THEMESET_INI exists
-=- create MBF engine for ./Resource/font/uE.mbf

Cannot engage Mobile font: ArInitFont() is failed.
-=- create FT engine for ./Resource/font/uE.mbf
                [VoutUtil.cpp:1~~SetVideoStandard 25 1
33,SetVideoStandard] 1,  standard = 25
                [VoutUtil.cpp:134,SetVideoStandard] 2,    enProg = 1
                [VoutUtil.cpp:135,SetVideoStandard] 3,     enDIF = 1
                [VoutUtil.cpp:136,SetVideoStandard] 4, enCompRGB = 0
                [VoutUtil.cpp:137,SetVideoStandard] 5,   pedType = 1
                [VoutUtil.cpp:138,SetVideoStandard] 6,  dataInt0 = 4
                [VoutUtil.cpp:139,SetVideoStandard] 7,  dataInt1 = 0
WARNING[1]:TVE i-underflow @ line 0
+++ ALLOC index: 22016 order: 9
1. start remap DVR zone 87600000(80608000) 512...
map_done is 0...
+++ ALLOC index: 22528 order: 11
1. start remap DVR zone 87800000(8060c000) 2048...
-------------------
Audio Version = 353448 (mars)
Common Version = 347207
Build Date = Mar 17 2011
Build Time = 10:04:10
Note =
-------------------
ClassifyBonding  DD   0x00000002
  Vendor:           Model: USB DISK 2.0      Rev: PMAP
  Type:   Direct-Access                      ANSI SCSI revision: 04
map_done is 0...
abstractap semid=0
sata2: no device found (phy stat 00000000)
sata2: ata_bus_probe failed
modprobe: module 'sd_mod' not found
semctl ret=0[HDMI]: AP set setHDMIDeepColorMode=0       do nothing.
[HDMI]: getHDMIPlugged()=-1
[HDMI]: getHDMIReady()=0
[HDMI]: getHDMISwitchTVSystem()=0
from main function = 23393032

**** Starting AP 1:10.16525 sec.
file system 3, cylinder 0
mount to /tmp/hdd/volumes/HDD1
file system 1, cylinder 0
mount to na
file system 2, cylinder 0
mount to /tmp/hdd/root
[HDMI]: Turn on HDMI AUDIO
ÿ
WatchDog does not receive signal for 5 seconds, value: 0
[HDMI]: MARS HDM[I2C0] i2c speed changed to 50 KHz
I is running...
[HDMI]: Disable HDCP
[HDMI]: Disable YST Mode. YSTMode_cnt=1
[HDMI]: USE_HDCP=NO in MakeConfig, do not Enable HDCP
[HDMI]: Set I2C Speed = 50 kHz
try - /dev/i2c/0
[HDMI]: Increase i2c pull-low strength.
[HDMI]: Hotplug Change !!! -1 -> 0 => No HDMI
[HDMI]: Turn off HDMI VIDEO
[HDMI]: Turn off HDMI VIDEO
[HDMI]: Turn off HDMI VIDEO OK



[Video Firmware Version]   347937
[Video Binary  Built on]   Jan 12 2011 18:35:52
Node 0, zone      DMA      1      0      0      0      0      0      1      1
   0      0      1      1      0
free pages:  3265
Node 0, zone      DVR      1      0      1      0      1      1      0      0
   0      0      1      0      3
free pages: 13365
cached size:  6264
try_to_free_pages: free 40
Node 0, zone      DMA     15      9      1      0      0      0      1      1
   0      0      1      1      0
free pages:  3301
Node 0, zone      DVR     15      8      5      1      5      2      0      0
   0      0      1      0      3
free pages: 13515
cached size:  6067
+++ ALLOC index: 16384 order: 12
1. start remap DVR zone 86000000(805dc000) 4096...
map_done is 0...
+++ ALLOC index: 12288 order: 10
1. start remap DVR zone 85000000(805bc000) 1024...
map_done is 0...
+++ ALLOC index: 21760 order: 3
1. start remap DVR zone 87500000(80606000) 8...
map_done is 8...
Node 0, zone      DMA     14     14      2      0      0      0      1      1
   0      0      1      1      0
free pages:  3314
Node 0, zone      DVR      0      9      7      6      4      1      1      0
   0      0      2      1      1
free pages:  8446
cached size:  6067
try_to_free_pages: free 0
Node 0, zone      DMA     11     14      2      0      0      0      1      1
   0      0      1      1      0
free pages:  3311
Node 0, zone      DVR      0      9      7      6      4      1      1      0
   0      0      2      1      1
free pages:  8446
cached size:  6067
+++ ALLOC index: 8192 order: 12
1. start remap DVR zone 84000000(8059c000) 4096...
map_done is 0...
Node 0, zone      DMA     14     14      2      0      0      0      1      1
   0      0      1      1      0
free pages:  3314
Node 0, zone      DVR     29     13      7      6      4      1      1      0
   0      0      2      1      0
free pages:  4387
cached size:  6067
try_to_free_pages: free 0
Node 0, zone      DMA     14     14      2      0      0      0      1      1
   0      0      1      1      0
free pages:  3314
Node 0, zone      DVR     14     13      7      6      4      1      1      0
   0      0      2      1      0
free pages:  4372
cached size:  6068
+++ ALLOC index: 4096 order: 12
1. start remap DVR zone 83000000(8057c000) 4096...
No swap area dedicated for remap...
Break instruction in kernel code in arch/mips/kernel/traps.c::do_bp, line 694[#1
]:
Cpu 0
$ 0   : 00000000 90000000 00000027 808efee4
$ 4   : 804946c8 804946c8 00000013 900000b4
$ 8   : 800a5428 804f0000 80490000 80490000
$12   : 804961ec 0000109a 00000000 00000001
$16   : 80500000 ffffffff 8057d360 00000001
$20   : 804f5d40 00000000 80496740 00000000
$24   : ffffefff 00200200
$28   : 80a58000 80a59d18 80a59d60 80193e18
Hi    : 00000000
Lo    : 0000000a
epc   : 80193e18 get_swap_page+0x74/0x56c     Not tainted
ra    : 80193e18 get_swap_page+0x74/0x56c
Status: 10007f03    KERNEL EXL IE
Cause : 58808024
PrId  : 00019378
Modules linked in: sata_mars libata venus_ir_new x_io ohci_hcd ehci_hcd cifs ven
us_gpio
Process RPC_thread_V (pid: 301, threadinfo=80a58000, task=80a32020)
Stack : 00000010 00000001 00000034 00000003 8057d360 80560fc0 8057d360 00000001
        804f5d40 00000002 80496740 00000000 80a59da0 80193234 00000000 00000002
        80496740 00000000 80a59da0 80180bc8 00000001 80560fc0 8057d360 804f5d40
        80181a20 80182614 804f7029 7e1ffbf0 8013a694 8013a694 80a32020 00000016
        00000001 80490000 80a59da0 80a59da0 80a59db0 8043bf7c 804961ec 80496224
        ...
Call Trace:
 [<80193234>] add_to_swap+0x40/0x188
 [<80180bc8>] remap_alloc_page+0x28/0x34
 [<80181a20>] remap_onepage+0x1c4/0x162c
 [<80182614>] remap_onepage+0xdb8/0x162c
 [<8013a694>] vprintk+0x610/0x674
 [<8013a694>] vprintk+0x610/0x674
 [<8043bf7c>] preempt_schedule+0x5c/0xa0
 [<80172800>] drain_pcp_pages+0x64/0xd4
 [<80183acc>] remap_DVR_region+0x3c8/0x690
 [<8013a714>] printk+0x1c/0x28
 [<80183f2c>] start_remap+0x198/0x200
 [<8013a714>] printk+0x1c/0x28
 [<8017ee88>] auth_ioctl+0x3d0/0x149c
 [<8014d318>] sys_kill+0x224/0x248
 [<8043bf7c>] preempt_schedule+0x5c/0xa0
 [<801c1a90>] sys_ioctl+0x490/0x4e0
 [<801345a4>] do_sched_setscheduler+0x118/0x138
 [<80134570>] do_sched_setscheduler+0xe4/0x138
 [<8011cb4c>] stack_done+0x20/0x40


Code: 3c048045  0c04e9be  248454a8 <0200000d> 8e02cf60  8c420000  30420003  2403
0003  10430004
eth0 Regs : 0xb8016000
 00 06 dc 46 43 ce 00 00 00 00 00 80 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 02 00 00 00 02 03 f5 00 00
 00 00 0c 00 00 00 00 0e 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 ec 00 00 00 84 01 78 49
 08 01 04 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
eth0 Regs : 0xb8016100
 a1 aa 64 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 a1 aa 60 00 00 00 02 00 00 00 00 00 00 00 00 00
eth0 Regs : 0xb8016200
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 3f 00 10 00 00 0c 34 0c 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
eth0 RxFDP : 0xa1aa6000
 00 08 00 80 10 70 aa 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 00 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 10 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 20 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 30 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 40 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 50 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 60 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 70 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 80 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 90 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 a0 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 b0 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 c0 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 d0 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 e0 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 f0 ac 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 10 ad 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 20 ad 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 30 ad 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 40 ad 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 50 ad 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 60 ad 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 70 ad 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 80 ad 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 a0 ad 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 b0 ad 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 c0 ad 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 d0 ad 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 e0 ad 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 f0 ad 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 00 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 10 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 20 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 30 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 40 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 50 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 60 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 70 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 80 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 90 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 a0 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 b0 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 c0 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 d0 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 e0 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 f0 ae 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 00 af 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 10 af 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 20 af 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 40 af 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 50 af 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 60 af 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 70 af 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 80 af 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 90 af 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 a0 af 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 b0 af 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 c0 af 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 d0 af 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 e0 af 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 f0 af 01 00 00 00 00 00 00 00 00
 00 08 00 80 10 00 80 01 00 00 00 00 00 00 00 00
 00 08 00 c0 10 10 80 01 00 00 00 00 00 00 00 00
note: RPC_thread_V[301] exited with preempt_count 1
pli initialization...
syslogd exiting
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sda: 7579008 512-byte hdwr sectors (3880 MB) physical_block_size:512

sda: Write Protect is off
sda: assuming drive cache: write through
disk->capacity:0x73a580
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sda: 7579008 512-byte hdwr sectors (3880 MB) physical_block_size:512

sda: Write Protect is off
sda: assuming drive cache: write through
disk->capacity:0x73a580
 /dev/scsi/host0/bus0/target0/lun0: p1<5>Attached scsi removable disk sda at scs
i0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
rmdir: '/var/lock/hotplug/mount_tmp/.sda1': No such file or directory
rmdir: '/var/lock/hotplug/mount_tmp/.sda': No such file or directory
Hotplug: "sda" has partitions.
do_page_fault() #2: sending SIGSEGV to S02swp for invalid read access from
10006000 (epc == 10006000, ra == 10005020)
current context: 32c
dvr_asid: 0xa2
########## User stack address: 82b4e000
Page flags: 61000060, index: 522859, count: 0, mapcount: 0
sending signal: 11
Call Trace:
 [<8014a010>] force_sig_info+0x54/0x154
 [<8011f298>] do_page_fault+0x3b8/0x450
 [<8011f05c>] do_page_fault+0x17c/0x450
 [<801bfb54>] dupfd+0x164/0x260
 [<80133860>] default_wake_function+0x0/0x20
 [<80133860>] default_wake_function+0x0/0x20
 [<8011f800>] tlb_do_page_fault_0+0xf8/0x100
 [<8011cb4c>] stack_done+0x20/0x40

ufsd: module license 'Commercial product' taints kernel.
ufsd: driver loaded at c01bc000 built on Aug 11 2009 20:12:04
UFSD version 7.07 (Aug 11 2009, 19:57:52)
NTFS read/write support included
Hfs+/HfsX read/write support included
$Id: ufsdvfs.c,v 1.228 2009/08/11 15:37:17 shura Exp $ (LBD=ON)
mount: mounting /dev/scsi/host0/bus0/target0/lun0/part1 on /var/lock/hotplug/mou
nt_tmp/.sda1 failed: Invalid argument
mount: mounting /dev/scsi/host0/bus0/target0/lun0/part1 on /var/lock/hotplug/mou
nt_tmp/.sda1 failed: No such device
readlink: Invalid argument
#######[cfyeh-debug] device_name_translating(248) open /sys/block/sda1/part_num
fail!
Hotplug: mount -t ufsd -o force,rw -o nls=utf8 -o umask=0 /dev/scsi/host0/bus0/t
arget0/lun0/part1 /var/lock/hotplug/mount_tmp/.sda1     ret: 255
Hotplug: mount -t ntfs -o ro -o nls=utf8 -o umask=0 /dev/scsi/host0/bus0/target0
/lun0/part1 /var/lock/hotplug/mount_tmp/.sda1   ret: 255
Hotplug: mount -t vfat -o ro,shortname=winnt -o utf8 -o umask=0 /dev/scsi/host0/
bus0/target0/lun0/part1 /var/lock/hotplug/mount_tmp/.sda1       ret: 0
part number: 1 (env)
extended number: 0 (env)
sequence value: 0 (env)
reserve 2, name: sda1
cmd_buffer: ln -s /tmp/usbmounts/sda1 /tmp/ramfs/volumes/C:
file system: vfat
device: /dev/scsi/host0/bus0/target0/lun0/part1
fat32...
reserved: 1618
fat_size: 7383
sec_size: 512
clus: 8
fats: 2
root: 2
volume name: Ž‚›‰ ’ŽŒ, len: 9
bus_type: usb (env)
port_structure: 1 (env)
Hotplug: Mount "sda1" successfully.
Hotplug got one BLOCK Hotplug of "Add" from "sda1"
Hotplug got one BLOCK Hotplug of "Ready" from "sda1"
Egreat R1, SATA 1TB, AMP r13 vrtn42
andree75
 
Posts: 8
Joined: 11 Dec 2015, 20:07

Re: Ядро AMP r13

Postby Virtual » 20 Mar 2024, 05:36

1. поменяй БП
2. смени скин на VRTN

PS загрузка крешится при инициализации GUI (пик потребления питания)
марсы: HDS7 (смотрелка AMP скин vrt )
HDR12 AMP (обычно сервер с RAM 256 и 2 SATA диска 2T+)//но очень иногда оцифровка видео
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.90 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6862
Joined: 01 Oct 2010, 17:17
Location: RU

Re: Ядро AMP r13

Postby andree75 » 20 Mar 2024, 07:41

Блоки питания менял 2шт - безрезультатно.
Как сменить скин, если плеер не загружается? Кстати, подключаюсь я к зверьку через arduino uno rx-rx, tx-tx, 3.3-3.3, gnd. К putty не смог подключиться, там ip надо вводить, но сеть я отключаю от плеера. Плеер можно с пульта вкл/выкл. Винт и lan сеть откидывал.
Egreat R1, SATA 1TB, AMP r13 vrtn42
andree75
 
Posts: 8
Joined: 11 Dec 2015, 20:07

Re: Восстановление при самой неудачной прошивке Mars(1073/12

Postby andree75 » 21 Mar 2024, 09:55

Начал не в той теме, продолжу здесь. Суть проблемы - при включении плеера на экране ТВ появляется только лого загрузки и всё. Плеер можно вкл/выкл с пульта. Перепрошивка через кнопку не получается - нет никакой реакции. Разобрал плеер, соединился с колодкой на плеере через ардуино уно Vcc-3.3 rx-rx tx-tx gnd-gnd. Зашел Гипертерминал, затем Esc и вкл питания плеера, получил приветствие Realtek, ввел erase -m, получил

| +
REALTEK ROM Monitor, Revision 0000.0202.0015.
Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved.

For a list of available commands, type 'help'.

Compilation time /version= Oct 13 2009 14:51:16 /0000.0202.0015
MAC address = 00.11.22.33.44.55
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00
Processor ID/revision = 0x93 / 0x78
Endianness = Little
Flash memory size = 256 MByte
SDRAM size = 128 MByte
First free SDRAM address = 0x800fc000

Press 'ESC' to Monitor mode
1080p 60Hz logo
Realtek> erase -m
/Done
Realtek>

затем вставил флешку с прошивкой vrtn 42 откл/вкл питания плеера и пошла информация. Лог прилагаю. Что дальше делать? Прошивка не началась.
| +
REALTEK ROM Monitor, Revision 0000.0202.0015.
Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved.

For a list of available commands, type 'help'.

Compilation time /version= Oct 13 2009 14:51:16 /0000.0202.0015
MAC address = 00.11.22.33.44.55
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00
Processor ID/revision = 0x93 / 0x78
Endianness = Little
Flash memory size = 256 MByte
SDRAM size = 128 MByte
First free SDRAM address = 0x800fc000

Press 'ESC' to Monitor mode
Signature(ÿÿÿÿÿÿÿÿ) error! Entering rescue linux...
Rescue kernel in FLASH, total size = 0xec411

seg.1 addr 0xa0a03e74, size = 0xec411

seg.2 addr 0x0, size = 0x0
copy rescue0: from a0a03e74 to a1000000, len = ec411
decompressing rescue: from a1000000 to a0100000: size = ec411
lzma finished
decompressing rescue done
go 0x80100000 BOOT_TAG=ÿÿÿÿÿÿÿÿ
1080p 60Hz logo
Reset Ethernet Mac.


Address = 0x80100000

Realtek LINUX (DC ALIAS) started...
Venus setting:
ROSs have 2621440 bytes RAM.
System CPU has 1 UART.
System CPU uses external timer interrupt.
Bootloader version: 0000.0202.0015. This version string is of new format
.
The information of this board: Company ID:0x0 CPU ID: 0x12 Board I
D: 0x202
Ethernet Mac address: 00.11.22.33.44.55
Model Config length=0
Config serial console: console=ttyS0,115200n8r
prom_flashsize = 0x10000000
Linux version 2.6.12.6-VENUS (alan@localhost.localdomain) (gcc version 3.4.4 mip
ssde-6.03.01-20051114) #187 Thu Jul 16 13:45:24 CST 2009
**************************************************************
You didn't specify audio image address, use default instead...
**************************************************************
audio addr: 0
CPU revision is: 00019378
Determined physical RAM map:
memory: 00100000 @ 00000000 (usable)
memory: 002a0000 @ 00100000 (reserved)
memory: 019e0000 @ 003a0000 (usable)
memory: 00280000 @ 01d80000 (reserved)
memory: 06000000 @ 02000000 (usable)
show info: max_low_pfn:32768
show info: min_low_pfn:928
ZONE: DMA, PFN: 0
ZONE: DVR, PFN: 8192
Built 1 zonelists
Kernel command line: BOOT_TAG=ÿÿÿÿÿÿÿÿ console=ttyS0,115200n8r ip=192.168.0.9::1
92.168.0.254:255.0.0.0:::
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 256 (order: 8, 4096 bytes)
Estimate value: CPU frequency 405.01 MHz
Using 27.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 123648k/125824k available (1912k kernel code, 2112k reserved, 291k data,
404k init, 0k highmem)
Warning! Unknown board id.
Warning! Unknown board id.
==================== Warning! The calculated loops_per_jiffy is not similar to t
he default one. ====================
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
Linux NoNET1.0 for Linux 2.6
SCSI subsystem initialized
usbcore: registered new driver hub
GPIO: register IRQ 3... (Success)
se init module major number = 254
size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52...
Hello, Realtek TLB Mapper
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
NTFS driver 2.1.28 [Flags: R/O].
Serial: 8250/16550 driver $Revision: 1.90 $ 3 ports, IRQ sharing enabled
ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
io scheduler noop registered
Mars no support IDE
ide generic info: ide_generic_init
Mars no support IDE
libata version 1.12 loaded.
sata driver initial...
sata dma reset
sata1: reset phy again!
sata phy reset
sata1: reset phy again!
sata phy reset
sata1: reset phy extra!
sata phy reset
sata1: reset phy extra!
sata phy reset
sata1: reset phy extra!
sata phy reset
sata1: phy reset timeout!
sata1: no device found (phy stat 00000000)
scsi0 : SATA_DRV
sata dma reset
sata2: reset phy again!
sata phy reset
sata2: reset phy again!
sata phy reset
sata2: phy reset timeout!
sata2: no device found (phy stat 00000000)
scsi1 : SATA_DRV
VenusSFC MTD init
serial flash inaccessible
physmap flash device: 10000000 at fd00000
Realtek NAND Flash Driver Rev:188640 (2009-05-14)
One HY27UF082G2B chip has 1 die(s) on board
nand part=HY27UF082G2B, id=adda1095, device_size=268435456, chip_size=268435456,
num_chips=1, isLastPage=0
[rtk_nand_scan_bbt] have created bbt B0, just loads it !!
[dump_BBT] Nand BBT Content
[0] (0, 625, 0, 2047)
[1] (0, 1693, 0, 2046)
[2] (0, 1901, 0, 2045)
RTK: using the whole nand as a partitoin
Realtek Nand Flash Driver is successfully installing.
[usb_param] setting for mars
Setting for MARS-B
[usb_param] set port two for host!
[usb_param1] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb_param1] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb_param1] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb_param1] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb_param1] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
[usb_param2] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb_param2] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb_param2] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb_param2] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb_param2] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
ehci_hcd ehci_hcd: EHCI Host Controller
ehci_hcd ehci_hcd: new USB bus registered, assigned bus number 1
ehci_hcd ehci_hcd: irq 2, io mem 0xb8013000
ehci_hcd ehci_hcd: park 0
ehci_hcd ehci_hcd: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub : individual port power switching
hub : individual port over-current protection
[cfyeh] set PPE = 0
[usb_param] setting for mars
Setting for MARS-B
[usb_param] set port two for host!
[usb_param1] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb_param1] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb_param1] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb_param1] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb_param1] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
[usb_param2] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb_param2] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb_param2] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb_param2] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb_param2] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
ohci_hcd ohci_hcd: OHCI Host Controller
ohci_hcd ohci_hcd: new USB bus registered, assigned bus number 2
ohci_hcd ohci_hcd: irq 2, io mem 0xb8013400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub : no power switching (usb 1.0)
hub : no over-current protection
Initializing USB Mass Storage driver...
usb 1-2: new high speed USB device using ehci_hcd and address 2
###################################################################
[cfyeh-test] usb_set_configuration(1454)
Don't support this usb device or don't insert correct module yet!!!
bus_id 1-2:1.0 (config #1, interface 0)
###################################################################
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Setting registers , Enable OTG
dwc_otg: version 2.60a 22-NOV-2006
DWC_otg: Shared Tx FIFO mode
i2c /dev entries driver
=========================
= VER : 1.8
=========================
= PHY : 0
= MODE: MARS
DWC_otg: USB RESET
= SPD : 1
= SAR : 0x024 (7 bits)
= TX FIFO DEPTH : 8
= RX FIFO DEPTH : 8
= FIFO THRESHOLD: 4
= BUS JAM RECORVER : ON
= NON STOP WRITE : OFF
= SP PROTECT : ON
=========================
FATAL : I2C 1 pins have been occupied by PCI
Trying to free free IRQ3
Freeing prom memory: 0kb freed
Reclaim bootloader memory from 80020000 to 80100000
Freeing unused kernel memory: 404k freed
init started: BusyBox v1.1.3 (2009.07.16-05:44+0000) multi-call binary
Starting pid 290, console /dev/console: '/etc/init.d/rcS'
Welcome to Realtek Rescue Linux for PhotoViewer
mount: Mounting /dev/cdroms/cdrom0 on /mnt/usbmounts/cdrom failed: Unknown error
19
mount: Mounting /dev/hda1 on /mnt/usbmounts/hda1 failed: Unknown error 2
mount: Mounting /dev/hda1 on /mnt/usbmounts/hda1 failed: Unknown error 2
mount: Mounting /dev/hda1 on /mnt/usbmounts/hda1 failed: Unknown error 2

>>>>>> loader start! (Jul 16 2009:13:45:00, version=00.01.01)

Please press Enter to activate this console. Vendor: Model: USB DISK
2.0 Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 04
SCSI device sda: 7579008 512-byte hdwr sectors (3880 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
SCSI device sda: 7579008 512-byte hdwr sectors (3880 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
/dev/scsi/host2/bus0/target0/lun0: p1
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0
Hotplug: "sda" has partitions.
Hotplug: mount -t ufsd -o ro,sparse -o nls=utf8 -o umask=0 /dev/scsi/host2/bus0/
target0/lun0/part1 /var/lock/hotplug/mount_tmp/.sda1 ret: 255
Hotplug: mount -t ntfs -o ro -o nls=utf8 -o umask=0 /dev/scsi/host2/bus0/target0
/lun0/part1 /var/lock/hotplug/mount_tmp/.sda1 ret: 255
Hotplug: mount -t vfat -o ro,shortname=winnt -o utf8 -o umask=0 /dev/scsi/host2/
bus0/target0/lun0/part1 /var/lock/hotplug/mount_tmp/.sda1 ret: 255
Hotplug: mount -t ext3 -o ro /dev/scsi/host2/bus0/target0/lun0/part1 /var/lock/h
otplug/mount_tmp/.sda1 ret: 255
Hotplug: Mount --move "/mnt/usbmounts/sda1" fail.

Блоки питания менял 2шт - безрезультатно. Сеть и внешний HDD откидываю.
Egreat R1, SATA 1TB, AMP r13 vrtn42
andree75
 
Posts: 8
Joined: 11 Dec 2015, 20:07

Re: Восстановление при самой неудачной прошивке Mars(1073/12

Postby andree75 » 21 Mar 2024, 13:10

Пытался войти в resetrom через <пробел>, но при нажатии пробела на клавиатуре и подачи питания на плеер в гипертерминале бегут разные символы. Может не тот пробел нажимаю?
Egreat R1, SATA 1TB, AMP r13 vrtn42
andree75
 
Posts: 8
Joined: 11 Dec 2015, 20:07

Re: Восстановление при самой неудачной прошивке Mars(1073/12

Postby Virtual » 22 Mar 2024, 05:38

...
затем вставил флешку с прошивкой vrtn
...
Прошивка не началась.

rescue не понравилась флешка, или тип fs на ней. пробуй другую флешку или отформатировать ее в FAT32 повторно.
марсы: HDS7 (смотрелка AMP скин vrt )
HDR12 AMP (обычно сервер с RAM 256 и 2 SATA диска 2T+)//но очень иногда оцифровка видео
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.90 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6862
Joined: 01 Oct 2010, 17:17
Location: RU

Re: Восстановление при самой неудачной прошивке Mars(1073/12

Postby const » 22 Mar 2024, 10:50

andree75 wrote:Пытался войти в resetrom через <пробел>

Так, вроде, 'Enter' просят:
Code: Select all
>>>>>> loader start! (Jul 16 2009:13:45:00, version=00.01.01)

Please press Enter to activate this console.
ASUS O!Play (R1). AMP13, Vrtn.
const
 
Posts: 41
Joined: 01 Dec 2011, 22:06

Re: Восстановление при самой неудачной прошивке Mars(1073/12

Postby andree75 » 22 Mar 2024, 16:54

[/quote]Так, вроде, 'Enter' просят[/quote]
Это про другое. Это вот отсюда https://www.moservices.org/forum/viewtopic.php?f=21&t=1463
И еще вопрос в догонку, нашел за недорого iconbit hds41L. Можно ли на него поставить AMP r13 vrtn42?
Egreat R1, SATA 1TB, AMP r13 vrtn42
andree75
 
Posts: 8
Joined: 11 Dec 2015, 20:07

PreviousNext

Return to Hardware

Who is online

Users browsing this forum: No registered users and 16 guests