host=192.168.0.9, domain=, nis-domain=(none),
bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
yaffs: dev is 32505857 name is "mtdblock1"
yaffs: Attempting MTD mount on 31.1, "mtdblock1"
RTK rtc can work.
yaffs: restored from checkpoint
VFS: Mounted root (yaffs2 filesystem) readonly.
Mounted devfs on /dev
Freeing prom memory: 0kb freed
Reclaim bootloader memory from 80020000 to 80100000
Freeing unused kernel memory: 144k freed
Welcome to Realtek Linux
Please press Enter to activate this console. yaffs: dev is 32505858 name is "mtd
block2"
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
Starting INET services....
[usb_param] setting for mars
Setting for MARS-B
[usb_param] set port two for host!
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 1 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 2 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_39(417) tx_delay 1
[usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
[usb2_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
ehci_hcd ehci_hcd: EHCI Host Controller
ehci_hcd ehci_hcd: new USB bus registered, assigned bus number 1
ehci_hcd ehci_hcd: irq 2, io mem 0xb8013000
ehci_hcd ehci_hcd: park 0
ehci_hcd ehci_hcd: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub : individual port power switching
hub : individual port over-current protection
[cfyeh] set PPE = 0
[usb_param] setting for mars
Setting for MARS-B
[usb_param] set port two for host!
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 1 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 2 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_39(417) tx_delay 1
[usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
[usb2_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
ohci_hcd ohci_hcd: OHCI Host Controller
ohci_hcd ohci_hcd: new USB bus registered, assigned bus number 2
ohci_hcd ohci_hcd: irq 2, io mem 0xb8013400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub : no power switching (usb 1.0)
hub : no over-current protection
usb 1-1: new high speed USB device using ehci_hcd and address 2
scsi0 : SCSI emulation for USB Mass Storage devices
dd: can't open '/Test.fat': No such file or directory
mount: mounting /dev/rd/0 on /mnt/rd failed: Invalid argument
swapon: can't stat '/mnt/rd/swap.img': No such file or directory
Hotplug got one USB Hotplug of "Add" from port "1".
x_io mod (C)Virtual, ver:1.0.0.4.
get GPIO:49 = 1
set GPIO:49,0
get GPIO:47 = 1
set GPIO:47,0
get GPIO:4C = 1
set GPIO:4C,0
get GPIO:4B = 1
set GPIO:4B,1
get GPIO:2B = 0
set GPIO:2B,1
New Venus IR driver loaded
Date Time syncronization...
Starting spindown service...
Starting lighttp service...
Running dvdplayer with RootApp
set corepath: /tmp/hdd/volumes/HDD1/
libata version 1.12 loaded..
sata driver initial...2009/12/30 14:50
sata driver patched 2013/02/07 (Virtual)
mars_init_sata(1270)dev_addr:c00611f0
RootApp AVHDD version...
ata_device_add(4893)probe begin
scsi1 : SATA_DRV
sata dma reset
enter 2nd case...
================================================
================================================
root execute DvdPlayer...
================================================
================================================
IN : /tmp/ramfs/smb
[Dlna DMR] this is GDlnaMediaRendererAP
CMD: mkdir -p /tmp/netb/smb
In my system...
downloader 0 starts, 0x1593d08
downloader 1 starts, 0x15943c8
CMD: mkdir -p /tmp/smb
In my system...
CMD: ifconfig > /tmp/netb/samba_my_ip
In my system...
Warning!! the Mask is 1.
In my system...
GrandMa Revision: v6.36
!!!BootUP!!!
***128MB version...
Memory address 0x40000000
Bootup t3 = 1262304009.635 sec
--- RtkBootUP(84): 8.849 sec
0X00000002
sata1: no device found (phy stat 00000000)
sata1: ata_bus_probe failed
scsi2 : SATA_DRV
sata dma reset
+++ ALLOC index: 20480 order: 8
1. start remap DVR zone 87000000(805fc000) 256...
map_done is 0...
start[0-3] = {7001a500, 7001a504, 7001a508, 7001a50c}
end[0-3] = {7001a510, 7001a514, 7001a518, 7001a51c}
+++ ALLOC index: 20992 order: 9
1. start remap DVR zone 87200000(80600000) 512...
map_done is 0...
Video DebugMem PVIDEO_RPC_SetDebugMemory Called!+++ ALLOC index: 20736 order: 7
hysical Address = 0x9d3800
1. start remap DVR zone 87100000(805fe000) 128...
map_done is 0...
+++ ALLOC index: 20864 order: 7
1. start remap DVR zone 87180000(805ff000) 128...
map_done is 0...
+++ ALLOC index: 21504 order: 8
1. start remap DVR zone 87400000(80604000) 256...
map_done is 0...
[AUDIO WARNING]
no more memory , do Remote Malloc. Size 0x00186008
683 loadThemeSetting resource.cpp
No THEMESET_INI exists
-=- create MBF engine for ./Resource/font/uE.mbf
Cannot engage Mobile font: ArInitFont() is failed.
-=- create FT engine for ./Resource/font/uE.mbf
[VoutUtil.cpp:1~~SetVideoStandard 25 1
33,SetVideoStandard] 1, standard = 25
[VoutUtil.cpp:134,SetVideoStandard] 2, enProg = 1
[VoutUtil.cpp:135,SetVideoStandard] 3, enDIF = 1
[VoutUtil.cpp:136,SetVideoStandard] 4, enCompRGB = 0
[VoutUtil.cpp:137,SetVideoStandard] 5, pedType = 1
[VoutUtil.cpp:138,SetVideoStandard] 6, dataInt0 = 4
[VoutUtil.cpp:139,SetVideoStandard] 7, dataInt1 = 0
WARNING[1]:TVE i-underflow @ line 0
+++ ALLOC index: 22016 order: 9
1. start remap DVR zone 87600000(80608000) 512...
map_done is 0...
+++ ALLOC index: 22528 order: 11
1. start remap DVR zone 87800000(8060c000) 2048...
-------------------
Audio Version = 353448 (mars)
Common Version = 347207
Build Date = Mar 17 2011
Build Time = 10:04:10
Note =
-------------------
ClassifyBonding DD 0x00000002
Vendor: Model: USB DISK 2.0 Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 04
map_done is 0...
abstractap semid=0
sata2: no device found (phy stat 00000000)
sata2: ata_bus_probe failed
modprobe: module 'sd_mod' not found
semctl ret=0[HDMI]: AP set setHDMIDeepColorMode=0 do nothing.
[HDMI]: getHDMIPlugged()=-1
[HDMI]: getHDMIReady()=0
[HDMI]: getHDMISwitchTVSystem()=0
from main function = 23393032
**** Starting AP 1:10.16525 sec.
file system 3, cylinder 0
mount to /tmp/hdd/volumes/HDD1
file system 1, cylinder 0
mount to na
file system 2, cylinder 0
mount to /tmp/hdd/root
[HDMI]: Turn on HDMI AUDIO
ÿ
WatchDog does not receive signal for 5 seconds, value: 0
[HDMI]: MARS HDM[I2C0] i2c speed changed to 50 KHz
I is running...
[HDMI]: Disable HDCP
[HDMI]: Disable YST Mode. YSTMode_cnt=1
[HDMI]: USE_HDCP=NO in MakeConfig, do not Enable HDCP
[HDMI]: Set I2C Speed = 50 kHz
try - /dev/i2c/0
[HDMI]: Increase i2c pull-low strength.
[HDMI]: Hotplug Change !!! -1 -> 0 => No HDMI
[HDMI]: Turn off HDMI VIDEO
[HDMI]: Turn off HDMI VIDEO
[HDMI]: Turn off HDMI VIDEO OK
[Video Firmware Version] 347937
[Video Binary Built on] Jan 12 2011 18:35:52
Node 0, zone DMA 1 0 0 0 0 0 1 1
0 0 1 1 0
free pages: 3265
Node 0, zone DVR 1 0 1 0 1 1 0 0
0 0 1 0 3
free pages: 13365
cached size: 6264
try_to_free_pages: free 40
Node 0, zone DMA 15 9 1 0 0 0 1 1
0 0 1 1 0
free pages: 3301
Node 0, zone DVR 15 8 5 1 5 2 0 0
0 0 1 0 3
free pages: 13515
cached size: 6067
+++ ALLOC index: 16384 order: 12
1. start remap DVR zone 86000000(805dc000) 4096...
map_done is 0...
+++ ALLOC index: 12288 order: 10
1. start remap DVR zone 85000000(805bc000) 1024...
map_done is 0...
+++ ALLOC index: 21760 order: 3
1. start remap DVR zone 87500000(80606000) 8...
map_done is 8...
Node 0, zone DMA 14 14 2 0 0 0 1 1
0 0 1 1 0
free pages: 3314
Node 0, zone DVR 0 9 7 6 4 1 1 0
0 0 2 1 1
free pages: 8446
cached size: 6067
try_to_free_pages: free 0
Node 0, zone DMA 11 14 2 0 0 0 1 1
0 0 1 1 0
free pages: 3311
Node 0, zone DVR 0 9 7 6 4 1 1 0
0 0 2 1 1
free pages: 8446
cached size: 6067
+++ ALLOC index: 8192 order: 12
1. start remap DVR zone 84000000(8059c000) 4096...
map_done is 0...
Node 0, zone DMA 14 14 2 0 0 0 1 1
0 0 1 1 0
free pages: 3314
Node 0, zone DVR 29 13 7 6 4 1 1 0
0 0 2 1 0
free pages: 4387
cached size: 6067
try_to_free_pages: free 0
Node 0, zone DMA 14 14 2 0 0 0 1 1
0 0 1 1 0
free pages: 3314
Node 0, zone DVR 14 13 7 6 4 1 1 0
0 0 2 1 0
free pages: 4372
cached size: 6068
+++ ALLOC index: 4096 order: 12
1. start remap DVR zone 83000000(8057c000) 4096...
No swap area dedicated for remap...
Break instruction in kernel code in arch/mips/kernel/traps.c::do_bp, line 694[#1
]:
Cpu 0
$ 0 : 00000000 90000000 00000027 808efee4
$ 4 : 804946c8 804946c8 00000013 900000b4
$ 8 : 800a5428 804f0000 80490000 80490000
$12 : 804961ec 0000109a 00000000 00000001
$16 : 80500000 ffffffff 8057d360 00000001
$20 : 804f5d40 00000000 80496740 00000000
$24 : ffffefff 00200200
$28 : 80a58000 80a59d18 80a59d60 80193e18
Hi : 00000000
Lo : 0000000a
epc : 80193e18 get_swap_page+0x74/0x56c Not tainted
ra : 80193e18 get_swap_page+0x74/0x56c
Status: 10007f03 KERNEL EXL IE
Cause : 58808024
PrId : 00019378
Modules linked in: sata_mars libata venus_ir_new x_io ohci_hcd ehci_hcd cifs ven
us_gpio
Process RPC_thread_V (pid: 301, threadinfo=80a58000, task=80a32020)
Stack : 00000010 00000001 00000034 00000003 8057d360 80560fc0 8057d360 00000001
804f5d40 00000002 80496740 00000000 80a59da0 80193234 00000000 00000002
80496740 00000000 80a59da0 80180bc8 00000001 80560fc0 8057d360 804f5d40
80181a20 80182614 804f7029 7e1ffbf0 8013a694 8013a694 80a32020 00000016
00000001 80490000 80a59da0 80a59da0 80a59db0 8043bf7c 804961ec 80496224
...
Call Trace:
[<80193234>] add_to_swap+0x40/0x188
[<80180bc8>] remap_alloc_page+0x28/0x34
[<80181a20>] remap_onepage+0x1c4/0x162c
[<80182614>] remap_onepage+0xdb8/0x162c
[<8013a694>] vprintk+0x610/0x674
[<8013a694>] vprintk+0x610/0x674
[<8043bf7c>] preempt_schedule+0x5c/0xa0
[<80172800>] drain_pcp_pages+0x64/0xd4
[<80183acc>] remap_DVR_region+0x3c8/0x690
[<8013a714>] printk+0x1c/0x28
[<80183f2c>] start_remap+0x198/0x200
[<8013a714>] printk+0x1c/0x28
[<8017ee88>] auth_ioctl+0x3d0/0x149c
[<8014d318>] sys_kill+0x224/0x248
[<8043bf7c>] preempt_schedule+0x5c/0xa0
[<801c1a90>] sys_ioctl+0x490/0x4e0
[<801345a4>] do_sched_setscheduler+0x118/0x138
[<80134570>] do_sched_setscheduler+0xe4/0x138
[<8011cb4c>] stack_done+0x20/0x40
Code: 3c048045 0c04e9be 248454a8 <0200000d> 8e02cf60 8c420000 30420003 2403
0003 10430004
eth0 Regs : 0xb8016000
00 06 dc 46 43 ce 00 00 00 00 00 80 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 02 00 00 00 02 03 f5 00 00
00 00 0c 00 00 00 00 0e 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 ec 00 00 00 84 01 78 49
08 01 04 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
eth0 Regs : 0xb8016100
a1 aa 64 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a1 aa 60 00 00 00 02 00 00 00 00 00 00 00 00 00
eth0 Regs : 0xb8016200
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3f 00 10 00 00 0c 34 0c 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
eth0 RxFDP : 0xa1aa6000
00 08 00 80 10 70 aa 01 00 00 00 00 00 00 00 00
00 08 00 80 10 00 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 10 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 20 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 30 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 40 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 50 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 60 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 70 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 80 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 90 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 a0 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 b0 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 c0 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 d0 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 e0 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 f0 ac 01 00 00 00 00 00 00 00 00
00 08 00 80 10 10 ad 01 00 00 00 00 00 00 00 00
00 08 00 80 10 20 ad 01 00 00 00 00 00 00 00 00
00 08 00 80 10 30 ad 01 00 00 00 00 00 00 00 00
00 08 00 80 10 40 ad 01 00 00 00 00 00 00 00 00
00 08 00 80 10 50 ad 01 00 00 00 00 00 00 00 00
00 08 00 80 10 60 ad 01 00 00 00 00 00 00 00 00
00 08 00 80 10 70 ad 01 00 00 00 00 00 00 00 00
00 08 00 80 10 80 ad 01 00 00 00 00 00 00 00 00
00 08 00 80 10 a0 ad 01 00 00 00 00 00 00 00 00
00 08 00 80 10 b0 ad 01 00 00 00 00 00 00 00 00
00 08 00 80 10 c0 ad 01 00 00 00 00 00 00 00 00
00 08 00 80 10 d0 ad 01 00 00 00 00 00 00 00 00
00 08 00 80 10 e0 ad 01 00 00 00 00 00 00 00 00
00 08 00 80 10 f0 ad 01 00 00 00 00 00 00 00 00
00 08 00 80 10 00 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 10 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 20 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 30 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 40 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 50 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 60 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 70 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 80 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 90 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 a0 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 b0 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 c0 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 d0 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 e0 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 f0 ae 01 00 00 00 00 00 00 00 00
00 08 00 80 10 00 af 01 00 00 00 00 00 00 00 00
00 08 00 80 10 10 af 01 00 00 00 00 00 00 00 00
00 08 00 80 10 20 af 01 00 00 00 00 00 00 00 00
00 08 00 80 10 40 af 01 00 00 00 00 00 00 00 00
00 08 00 80 10 50 af 01 00 00 00 00 00 00 00 00
00 08 00 80 10 60 af 01 00 00 00 00 00 00 00 00
00 08 00 80 10 70 af 01 00 00 00 00 00 00 00 00
00 08 00 80 10 80 af 01 00 00 00 00 00 00 00 00
00 08 00 80 10 90 af 01 00 00 00 00 00 00 00 00
00 08 00 80 10 a0 af 01 00 00 00 00 00 00 00 00
00 08 00 80 10 b0 af 01 00 00 00 00 00 00 00 00
00 08 00 80 10 c0 af 01 00 00 00 00 00 00 00 00
00 08 00 80 10 d0 af 01 00 00 00 00 00 00 00 00
00 08 00 80 10 e0 af 01 00 00 00 00 00 00 00 00
00 08 00 80 10 f0 af 01 00 00 00 00 00 00 00 00
00 08 00 80 10 00 80 01 00 00 00 00 00 00 00 00
00 08 00 c0 10 10 80 01 00 00 00 00 00 00 00 00
note: RPC_thread_V[301] exited with preempt_count 1
pli initialization...
syslogd exiting
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sda: 7579008 512-byte hdwr sectors (3880 MB) physical_block_size:512
sda: Write Protect is off
sda: assuming drive cache: write through
disk->capacity:0x73a580
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sda: 7579008 512-byte hdwr sectors (3880 MB) physical_block_size:512
sda: Write Protect is off
sda: assuming drive cache: write through
disk->capacity:0x73a580
/dev/scsi/host0/bus0/target0/lun0: p1<5>Attached scsi removable disk sda at scs
i0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
rmdir: '/var/lock/hotplug/mount_tmp/.sda1': No such file or directory
rmdir: '/var/lock/hotplug/mount_tmp/.sda': No such file or directory
Hotplug: "sda" has partitions.
do_page_fault() #2: sending SIGSEGV to S02swp for invalid read access from
10006000 (epc == 10006000, ra == 10005020)
current context: 32c
dvr_asid: 0xa2
########## User stack address: 82b4e000
Page flags: 61000060, index: 522859, count: 0, mapcount: 0
sending signal: 11
Call Trace:
[<8014a010>] force_sig_info+0x54/0x154
[<8011f298>] do_page_fault+0x3b8/0x450
[<8011f05c>] do_page_fault+0x17c/0x450
[<801bfb54>] dupfd+0x164/0x260
[<80133860>] default_wake_function+0x0/0x20
[<80133860>] default_wake_function+0x0/0x20
[<8011f800>] tlb_do_page_fault_0+0xf8/0x100
[<8011cb4c>] stack_done+0x20/0x40
ufsd: module license 'Commercial product' taints kernel.
ufsd: driver loaded at c01bc000 built on Aug 11 2009 20:12:04
UFSD version 7.07 (Aug 11 2009, 19:57:52)
NTFS read/write support included
Hfs+/HfsX read/write support included
$Id: ufsdvfs.c,v 1.228 2009/08/11 15:37:17 shura Exp $ (LBD=ON)
mount: mounting /dev/scsi/host0/bus0/target0/lun0/part1 on /var/lock/hotplug/mou
nt_tmp/.sda1 failed: Invalid argument
mount: mounting /dev/scsi/host0/bus0/target0/lun0/part1 on /var/lock/hotplug/mou
nt_tmp/.sda1 failed: No such device
readlink: Invalid argument
#######[cfyeh-debug] device_name_translating(248) open /sys/block/sda1/part_num
fail!
Hotplug: mount -t ufsd -o force,rw -o nls=utf8 -o umask=0 /dev/scsi/host0/bus0/t
arget0/lun0/part1 /var/lock/hotplug/mount_tmp/.sda1 ret: 255
Hotplug: mount -t ntfs -o ro -o nls=utf8 -o umask=0 /dev/scsi/host0/bus0/target0
/lun0/part1 /var/lock/hotplug/mount_tmp/.sda1 ret: 255
Hotplug: mount -t vfat -o ro,shortname=winnt -o utf8 -o umask=0 /dev/scsi/host0/
bus0/target0/lun0/part1 /var/lock/hotplug/mount_tmp/.sda1 ret: 0
part number: 1 (env)
extended number: 0 (env)
sequence value: 0 (env)
reserve 2, name: sda1
cmd_buffer: ln -s /tmp/usbmounts/sda1 /tmp/ramfs/volumes/C:
file system: vfat
device: /dev/scsi/host0/bus0/target0/lun0/part1
fat32...
reserved: 1618
fat_size: 7383
sec_size: 512
clus: 8
fats: 2
root: 2
volume name: Ž‚›‰ ’ŽŒ, len: 9
bus_type: usb (env)
port_structure: 1 (env)
Hotplug: Mount "sda1" successfully.
Hotplug got one BLOCK Hotplug of "Add" from "sda1"
Hotplug got one BLOCK Hotplug of "Ready" from "sda1"
...
затем вставил флешку с прошивкой vrtn
...
Прошивка не началась.
andree75 wrote:Пытался войти в resetrom через <пробел>
>>>>>> loader start! (Jul 16 2009:13:45:00, version=00.01.01)
Please press Enter to activate this console.
Users browsing this forum: No registered users and 47 guests