Winstars WS-AV601D1 RTD1185-PA is stuck in an update loop after sending (via telnet);
echo " " | dd of=/dev/mtdblock/0 bs=2048 seek=8192
Screen has "Please wait for USB Update", but there is no firmware available from the manufacturer to put in USB. No other firmware will install (RSA error via serial monitor).
I cannot use jupiter recovery tools to restore bootloader because device has DDR3 x1 RAM (Hynix H5TQ2G63DFA-H9C).
jupiter.recovery.BGA.128x2.DDR3.config does not apply to this RAM.
I am able to connect via serial cable and execute commands.
Is there some "dd" command to reverse "dd of=/dev/mtdblock/0 bs=2048 seek=8192" so that it boots normally instead of to rescue recovery?
Mod: Please approve my message for posting. Thank you.