Soft "Reset" for players with bootcode 17 and earlier
Posted: 30 Oct 2010, 10:50
Digging in bootrom and foreign firmwares prompted the method of clearing the memory before flashing.
In a terminal type the following command
Turning off the power player, insert the stick with the right firmware includes.
Turn on. The player goes on to re-flash.
Be careful when dialing numbers - any mistake can lead to turning your player into a brick!
Everything you do, you do at your own risk! Everything, that you do not - you just do not
To attention of HD2 owners!!!!!!!! Unfortunately, owing to Asus, on the market is the party of players with a "beaten" boot-code, to be exact, with the block of restoration "rescue". If through the reset button the player is not updating FW, don't do anything, first - you must to update boot through a serial cable, details here viewtopic.php?p=2522#p2522
In a terminal type the following command
- Code: Select all
echo " " | dd of=/dev/mtdblock/0 bs=2048 seek=8192
Turning off the power player, insert the stick with the right firmware includes.
Turn on. The player goes on to re-flash.
Be careful when dialing numbers - any mistake can lead to turning your player into a brick!
Everything you do, you do at your own risk! Everything, that you do not - you just do not
To attention of HD2 owners!!!!!!!! Unfortunately, owing to Asus, on the market is the party of players with a "beaten" boot-code, to be exact, with the block of restoration "rescue". If through the reset button the player is not updating FW, don't do anything, first - you must to update boot through a serial cable, details here viewtopic.php?p=2522#p2522