moServices

by **Virtual** » 24 Feb 2014, 20:58

viewtopic.php?f=41&t=3240
начиная с AMP11:

исправления в scsi sd
исправления в EFI(GPT)
помимо того что заработали диски более 2Т и GPT ...

by **Nikky1205** » 25 Feb 2014, 21:34

обновился на AMP 12, но hdd с gpt плейер так и не увидел. Втыкаю его в usb, на экране пишет "подключено новое устройство, а захожу в "файлы", usb не появляется, доступно только net и upnp. hdd с mbr видит без проблем. В общем, праздника не случилось, все осталось также как и было... только iptv пропало, а какой сервис на прошлой прошивке был подключен, я уже забыл... но это мелочи, вспомню, верну все назад. Печально, что hdd 3 Tb не видит...

А вообще авторы молодцы, просто волшебники! Спасибо огромное за ваш труд!

by **Valentin** » 26 Feb 2014, 00:26

У меня прошивка r11_icon_4.
Может кто знает как в этом плейере настроить аудиовыход через оптический S/PDIF? Никак не могу добиться чтобы работала подключенная акустическая система

by **Virtual** » 26 Feb 2014, 04:42

Nikky1205 wrote:... Печально, что hdd 3 Tb не видит...

враки

Code: Select all: ~ # parted -l Model: ATA ST3000DM001-1CH1 (scsi) Disk /dev/scsi/host0/bus0/target0/lun0/disc: 3001GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 4194kB 429GB 429GB ntfs 2 429GB 859GB 429GB ext2 3 859GB 3001GB 2142GB ext3

но у меня подключение по sata., а комп видит диск через usb?

покажи результат (при подключеном диске)

Code: Select all: parted -l df -h mount

by **Nikky1205** » 26 Feb 2014, 17:46

Вернул iptv. Установил iptvlist, загрузил плейлист от провайдера, все здорово! А с hdd те же траблы.

Code: Select all: # mount rootfs on / type rootfs (rw) /dev/root on / type yaffs2 (rw,noatime) none on /dev type devfs (rw) none on /proc type proc (rw,nodiratime) devpts on /dev/pts type devpts (rw) none on /sys type sysfs (rw) /dev/mtdblock/2 on /usr/local/etc type yaffs2 (rw,noatime) none on /tmp type ramfs (rw) /dev/rd/0 on /mnt/rd type vfat (rw,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1) /dev/root on /usr/local/etc/mos type yaffs2 (rw,noatime) /dev/loop/0 on /usr/local/bin type squashfs (ro) /dev/loop/1 on /usr/local/bin/Resource type squashfs (ro)

Code: Select all: # df -h Filesystem Size Used Available Use% Mounted on /dev/root 215.0M 65.4M 149.6M 30% / /dev/mtdblock/2 4.0M 1.4M 2.6M 36% /usr/local/etc /dev/rd/0 40.0K 40.0K 0 100% /mnt/rd /dev/root 215.0M 65.4M 149.6M 30% /usr/local/etc/mos /dev/loop/0 14.9M 14.9M 0 100% /usr/local/bin /dev/loop/1 2.7M 2.7M 0 100% /usr/local/bin/Resource

А на parted -l вообще ничего не выдает...
Выбираю вкладку diskinfo, выдает:

Code: Select all: Warning: Invalid argument supplied for foreach() in /usr/local/etc/mos/www/modules/fakeshell/fakeshell.php on line 124 Warning: Invalid argument supplied for foreach() in /usr/local/etc/mos/www/modules/fakeshell/fakeshell.php on line 142 DISK TOTAL FREE

Выбираю в moS "дополнительно"/"информация о системе", выдает:

Code: Select all: /bin/uname -a Linux AMP12 2.6.12.6-VENUS #AMP12.5 Mon Nov 25 18:47:23 BDT 2013 mips GNU/Linux cat /proc/cpuinfo system type : Realtek Venus processor : 0 cpu model : MIPS 24K V7.8 BogoMIPS : 269.51 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes ASEs implemented : mips16 VCED exceptions : not available VCEI exceptions : not available cat /proc/meminfo MemTotal: 120676 kB MemFree: 9172 kB Buffers: 292 kB Cached: 24060 kB SwapCached: 0 kB Active: 12732 kB Inactive: 18060 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 120676 kB LowFree: 9172 kB SwapTotal: 32 kB SwapFree: 32 kB Dirty: 0 kB Writeback: 0 kB Mapped: 16140 kB Slab: 8388 kB CommitLimit: 60368 kB Committed_AS: 18260 kB PageTables: 636 kB VmallocTotal: 1048548 kB VmallocUsed: 1968 kB VmallocChunk: 1045304 kB /sbin/lsmod ufsd 624720 0 - Live 0xc0291000 8712u 386832 0 - Live 0xc0175000 ohci_hcd 21904 0 - Live 0xc00ae000 ehci_hcd 43552 0 - Live 0xc008a000 sata_mars 22080 0 - Live 0xc005e000 libata 55696 1 sata_mars, Live 0xc0097000 venus_ir_new 13376 5 - Live 0xc0065000 x_io 3408 0 - Live 0xc005c000 cifs 284288 0 - Live 0xc00b9000 venus_gpio 10032 1 - Live 0xc0058000 /bin/ps -w PID Uid VmSize Stat Command 1 root 2312 S init 2 root 0 SWN [ksoftirqd/0] 3 root 0 SW< [events/0] 4 root 0 SW< [khelper] 5 root 0 SW< [kthread] 6 root 0 SW< [kblockd/0] 7 root 0 SW [khubd] 8 root 0 SW [rpc-1] 9 root 0 SW [rpc-3] 10 root 0 SW [pdflush] 11 root 0 SW [pdflush] 13 root 0 SW< [aio/0] 12 root 0 SW [kswapd0] 15 root 0 SW [eth0] 16 root 0 SW [mtdblockd] 14 root 0 SW [kseriod] 24 root 2312 S init 25 root 2312 S init 28 root 2312 S init 31 root 2312 S init 44 root 0 SW< [cifsoplockd] 45 root 0 SW< [cifsdnotifyd] 51 root 2312 S /sbin/syslogd -s 128 -O /tmp/.log -n -m 0 52 root 2308 S /sbin/klogd -n 55 root 2324 S inetd 84 root 436 S /usr/local/etc/irfake/irfake4 -R -f /usr/local/etc/irfake/irfake.conf 91 root 0 SW< [loop0] 94 root 0 SW< [loop1] 121 root 2316 S /bin/sh /usr/local/etc/mos/bin/rebootd 166 root 444 S /usr/local/sbin/RootApp DvdPlayer 171 root 0 SW< [sata_eh/0] 181 root 0 SW [scsi_eh_0] 186 root 0 SW [scsi_eh_1] 167 root 444 S /usr/local/sbin/RootApp DvdPlayer 194 root 1648 S N /usr/local/etc/mos/bin/vsftpd /usr/local/etc/mos/etc/vsftpd.conf 197 root 790m S < DvdPlayer 202 root 790m S DvdPlayer 203 root 790m S N DvdPlayer 204 root 790m S N DvdPlayer 205 root 444 S /usr/local/sbin/RootApp DvdPlayer 196 root 5388 S N /usr/local/etc/mos/bin/lighttpd -f /usr/local/etc/mos/etc/lighttpd.conf 212 root 18216 S N /usr/local/etc/mos/bin/php 230 root 790m S DvdPlayer 231 root 790m S DvdPlayer 235 root 790m S DvdPlayer 236 root 790m S DvdPlayer 237 root 790m S DvdPlayer 238 root 790m S DvdPlayer 239 root 790m S DvdPlayer 240 root 790m S DvdPlayer 244 root 18756 S N /usr/local/etc/mos/bin/php 245 root 18240 S N /usr/local/etc/mos/bin/php 247 root 790m S DvdPlayer 249 root 790m S DvdPlayer 250 root 790m S DvdPlayer 252 root 790m S DvdPlayer 253 root 790m S DvdPlayer 260 root 790m S DvdPlayer 246 root 18236 S N /usr/local/etc/mos/bin/php 263 root 790m S DvdPlayer 267 root 790m S DvdPlayer 272 root 790m S DvdPlayer 273 root 790m S DvdPlayer 276 root 790m S DvdPlayer 277 root 790m S DvdPlayer 278 root 790m S DvdPlayer 279 root 790m S DvdPlayer 315 root 2312 S /sbin/udhcpc -p /var/lock/udhcpc_eth0.pid -t 15 -b -s /etc/udhcpc.script -i eth0 350 root 790m S DvdPlayer 375 root 0 SW [scsi_eh_2] 376 root 0 SW [usb-storage] 391 root 0 SW [scsi_eh_3] 392 root 0 SW [usb-storage] 415 root 0 SW [RTKTHREAD] 420 root 1644 S /usr/local/bin/_wpa_supplicant -P/var/lock/wpa_supplicant.pid -g/var/run/wpa_supplicant-global -B 5363 root 790m S DvdPlayer 32723 root 0 Z < [S10remount] 32724 root 0 Z < [S12autorun] 32742 root 2308 S sleep 1 32747 root 2316 S N sh -c /bin/ps -w 32748 root 2316 R N /bin/ps -w /bin/dmesg ] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev: Type: Direct-Access ANSI SCSI revision: 05 $$$ vrt_dbg scsi_level 0x3 $$$ vrt-debug 0x0 $$$ vrt_dbg scsi_level 0x3 SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512 sdb: assuming drive cache: write through disk->capacity:0x0 Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 FAT: unable to read boot sector EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock /bin/busybox BusyBox v1.18.5 (2013-10-10 17:37:45 BDT) multi-call binary. Copyright (C) 1998-2009 Erik Andersen, Rob Landley, Denys Vlasenko and others. Licensed under GPLv2. See source distribution for full notice. Usage: busybox [function] [arguments]... or: busybox --list[-full] or: function [arguments]... BusyBox is a multi-call binary that combines many common Unix utilities into a single executable. Most people will create a link to busybox for each function they wish to use and BusyBox will act like whatever it was invoked as. Currently defined functions: [, [[, acpid, add-shell, addgroup, adduser, adjtimex, ar, arp, arping, ash, awk, basename, bash, blkid, blockdev, bootchartd, brctl, bunzip2, bzcat, bzip2, cal, cat, catv, chat, chattr, chgrp, chmod, chown, chpasswd, chpst, chroot, chrt, chvt, clear, cmp, conspy, cp, cpio, cryptpw, cttyhack, cut, date, dc, dd, deallocvt, delgroup, deluser, depmod, devfsd, devmem, df, dhcprelay, diff, dirname, dmesg, dnsd, dnsdomainname, dos2unix, dpkg, dpkg-deb, du, dumpkmap, dumpleases, echo, ed, egrep, eject, env, envdir, envuidgid, ether-wake, expr, fakeidentd, false, fbset, fbsplash, fdflush, fdformat, fdisk, fgconsole, fgrep, find, findfs, flock, fold, free, freeramdisk, fsck.minix, fsync, ftpd, ftpget, ftpput, fuser, getopt, getty, grep, gunzip, gzip, halt, hd, hdparm, head, hexdump, hostid, hostname, httpd, hwclock, id, ifconfig, ifdown, ifenslave, ifplugd, ifup, inetd, init, insmod, install, iostat, ip, ipaddr, ipcalc, ipcrm, ipcs, iplink, iproute, iprule, iptunnel, kbd_mode, kill, killall, killall5, klogd, length, less, linux32, linux64, ln, loadfont, loadkmap, logger, login, logname, logread, losetup, ls, lsmod, lspci, lsusb, lzcat, lzma, lzop, lzopcat, makedevs, man, md5sum, mesg, microcom, mkdir, mkdosfs, mkfifo, mkfs.minix, mkfs.vfat, mknod, mkpasswd, mkswap, mktemp, modinfo, modprobe, more, mount, mountpoint, mpstat, mt, mv, nameif, nbd-client, nc, netstat, nice, nmeter, nohup, nslookup, ntpd, od, openvt, passwd, patch, pgrep, pidof, ping, pipe_progress, pivot_root, pkill, pmap, poweroff, powertop, printenv, printf, ps, pscan, pwd, raidautorun, rdate, rdev, readlink, readprofile, realpath, reboot, remove-shell, renice, reset, resize, rev, rm, rmdir, rmmod, route, rpm, rpm2cpio, rtcwake, run-parts, runlevel, runsv, runsvdir, rx, script, scriptreplay, sed, seq, setarch, setconsole, setfont, setkeycodes, setlogcons, setsid, setuidgid, sh, sha1sum, sha256sum, sha512sum, showkey, slattach, sleep, smemcap, softlimit, sort, split, start-stop-daemon, stat, strings, stty, su, sulogin, sum, sv, svlogd, swapoff, swapon, switch_root, sync, sysctl, syslogd, tac, tail, tar, tcpsvd, tee, telnet, telnetd, test, tftp, tftpd, time, timeout, top, touch, tr, traceroute, true, tty, ttysize, tunctl, udhcpc, udhcpd, udpsvd, umount, uname, uncompress, unexpand, uniq, unix2dos, unlzma, unlzop, unxz, unzip, uptime, usleep, uuencode, vconfig, vi, vlock, volname, wall, watch, watchdog, wc, wget, which, whoami, xargs, xz, xzcat, yes, zcat, zcip cat /proc/mounts rootfs / rootfs rw 0 0 /dev/root / yaffs2 rw,noatime 0 0 none /dev devfs rw 0 0 none /proc proc rw,nodiratime 0 0 devpts /dev/pts devpts rw 0 0 none /sys sysfs rw 0 0 /dev/mtdblock/2 /usr/local/etc yaffs2 rw,noatime 0 0 none /tmp ramfs rw 0 0 /dev/rd/0 /mnt/rd vfat rw,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1 0 0 /dev/root /usr/local/etc/mos yaffs2 rw,noatime 0 0 /dev/loop/0 /usr/local/bin squashfs ro 0 0 /dev/loop/1 /usr/local/bin/Resource squashfs ro 0 0 /bin/df -h Filesystem Size Used Available Use% Mounted on /dev/root 215.0M 65.4M 149.6M 30% / /dev/mtdblock/2 4.0M 1.4M 2.6M 36% /usr/local/etc /dev/rd/0 40.0K 40.0K 0 100% /mnt/rd /dev/root 215.0M 65.4M 149.6M 30% /usr/local/etc/mos /dev/loop/0 14.9M 14.9M 0 100% /usr/local/bin /dev/loop/1 2.7M 2.7M 0 100% /usr/local/bin/Resource /sbin/fdisk -l /sbin/ifconfig eth0 Link encap:Ethernet HWaddr BC:AE:C5:88:16:67 inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1860 errors:0 dropped:0 overruns:0 frame:0 TX packets:323 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:623985 (609.3 KiB) TX bytes:128089 (125.0 KiB) Interrupt:2 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1008 (1008.0 B) TX bytes:1008 (1008.0 B) wlan0 Link encap:Ethernet HWaddr 1C:4B:D6:36:E8:FD UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) /sbin/route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 169.254.0.0 * 255.255.0.0 U 0 0 0 eth0 127.0.0.0 * 255.0.0.0 U 0 0 0 lo default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 cat /etc/resolv.conf nameserver 127.0.0.1 nameserver 127.0.0.1 nameserver 192.168.1.1 set HISTFILE='/tmp/.ash_history' HISTSIZE='1000' HOME='/' HOSTNAME='AMP12' IFS=' ' LD_LIBRARY_PATH='/usr/local/etc/mos/lib:/lib' OPTIND='1' PATH='/opt/sbin:/opt/bin:/usr/local/bin:/usr/local/sbin:/usr/local/etc/mos/bin:/sbin:/usr/sbin:/bin:/usr/bin' PHP_FCGI_CHILDREN='3' PPID='244' PS1='\w \$ ' PS2='> ' PS4='+ ' PWD='/tmp/www' SDL_FBDEV='/dev/fb/0' SDL_NOMOUSE='' SHELL='/bin/sh' TERM='ansi' TERMINFO='/usr/share/terminfo' TZ='MSK-3MSD,M3.5.0,M10.5.0/3' USER='root'

by **Virtual** » 26 Feb 2014, 19:41

а что это у вас диск "моргает"... "то потухнет то погаснет"? :mrgreen:

электричества недостаточно! вы его от чего питаете?

PS и скин какой?
PSPS и не вижу ответа:
а комп видит диск через usb? в этом боксе.

by **Nikky1205** » 26 Feb 2014, 20:07

Питание бокса от штатного БП, который шел с ним в комплекте.
скин - vrt ALL Casablanca
комп нормально видит этот диск в этом боксе под win XP x64, win 7. Диск целиком под gpt одним разделом на весь объем. На него пишу с компа фильмы, и смотрю только на компе с него же (в этом же боксе, как купил винт и бокс, воткнул винт в бокс, так и не вытаскивал), с плейером пока подружить не могу.
P.S. Есть ноутбучный винт 2,5" небольшого объема с mbr, так его цепляю к плейеру через usb без какого-либо БП, пашет без проблем. Вот и приходиться с большого винта на компе копировать на маленький и смотреть кино с него.

by **Virtual** » 26 Feb 2014, 20:29

Диск целиком под gpt одним разделом на весь объем.

тип ФС какой?

хм ... может в этом проблема... незнаю, просто никогда не возникало желания создать один раздел в 3Т :mrgreen:

., недайбоже глюкнет - чинить его обхохочешся.
в ближайшее время проверить это предположение(проблему) возможности нет!. ибо диск в наличии на 50% заполнен а нового не предвидется.

by **Nikky1205** » 26 Feb 2014, 20:33

Хорошо... заполнен то он пока процентов на 30, попробую размер раздела уменьшить, а на освободившемся месте создать еще раздел. Поможет?...

by **Virtual** » 26 Feb 2014, 20:56

ну мне помогло. разделы все менее 2Т. + само собой никаких ExtFAT.. и других неподдерживаемых.

moServices

O!Play HD2

Re: O!Play HDP-R1/R3 с чего начинать

Re: O!Play HDP-R1/R3 с чего начинать

Re: O!Play HDP-R1/R3 с чего начинать

Re: O!Play HDP-R1/R3 с чего начинать

Re: O!Play HDP-R1/R3 с чего начинать

Re: O!Play HDP-R1/R3 с чего начинать

Re: O!Play HDP-R1/R3 с чего начинать

Re: O!Play HDP-R1/R3 с чего начинать

Re: O!Play HDP-R1/R3 с чего начинать

Re: O!Play HDP-R1/R3 с чего начинать

Who is online