начиная с AMP11:
исправления в scsi sd
исправления в EFI(GPT)
помимо того что заработали диски более 2Т и GPT ...
исправления в scsi sd
исправления в EFI(GPT)
помимо того что заработали диски более 2Т и GPT ...
Nikky1205 wrote:... Печально, что hdd 3 Tb не видит...
~ # parted -l
Model: ATA ST3000DM001-1CH1 (scsi)
Disk /dev/scsi/host0/bus0/target0/lun0/disc: 3001GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 4194kB 429GB 429GB ntfs
2 429GB 859GB 429GB ext2
3 859GB 3001GB 2142GB ext3
parted -l
df -h
mount
# mount
rootfs on / type rootfs (rw)
/dev/root on / type yaffs2 (rw,noatime)
none on /dev type devfs (rw)
none on /proc type proc (rw,nodiratime)
devpts on /dev/pts type devpts (rw)
none on /sys type sysfs (rw)
/dev/mtdblock/2 on /usr/local/etc type yaffs2 (rw,noatime)
none on /tmp type ramfs (rw)
/dev/rd/0 on /mnt/rd type vfat (rw,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
/dev/root on /usr/local/etc/mos type yaffs2 (rw,noatime)
/dev/loop/0 on /usr/local/bin type squashfs (ro)
/dev/loop/1 on /usr/local/bin/Resource type squashfs (ro)
# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 215.0M 65.4M 149.6M 30% /
/dev/mtdblock/2 4.0M 1.4M 2.6M 36% /usr/local/etc
/dev/rd/0 40.0K 40.0K 0 100% /mnt/rd
/dev/root 215.0M 65.4M 149.6M 30% /usr/local/etc/mos
/dev/loop/0 14.9M 14.9M 0 100% /usr/local/bin
/dev/loop/1 2.7M 2.7M 0 100% /usr/local/bin/Resource
Warning: Invalid argument supplied for foreach() in /usr/local/etc/mos/www/modules/fakeshell/fakeshell.php on line 124
Warning: Invalid argument supplied for foreach() in /usr/local/etc/mos/www/modules/fakeshell/fakeshell.php on line 142
DISK TOTAL FREE
/bin/uname -a
Linux AMP12 2.6.12.6-VENUS #AMP12.5 Mon Nov 25 18:47:23 BDT 2013 mips GNU/Linux
cat /proc/cpuinfo
system type : Realtek Venus
processor : 0
cpu model : MIPS 24K V7.8
BogoMIPS : 269.51
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes
ASEs implemented : mips16
VCED exceptions : not available
VCEI exceptions : not available
cat /proc/meminfo
MemTotal: 120676 kB
MemFree: 9172 kB
Buffers: 292 kB
Cached: 24060 kB
SwapCached: 0 kB
Active: 12732 kB
Inactive: 18060 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 120676 kB
LowFree: 9172 kB
SwapTotal: 32 kB
SwapFree: 32 kB
Dirty: 0 kB
Writeback: 0 kB
Mapped: 16140 kB
Slab: 8388 kB
CommitLimit: 60368 kB
Committed_AS: 18260 kB
PageTables: 636 kB
VmallocTotal: 1048548 kB
VmallocUsed: 1968 kB
VmallocChunk: 1045304 kB
/sbin/lsmod
ufsd 624720 0 - Live 0xc0291000
8712u 386832 0 - Live 0xc0175000
ohci_hcd 21904 0 - Live 0xc00ae000
ehci_hcd 43552 0 - Live 0xc008a000
sata_mars 22080 0 - Live 0xc005e000
libata 55696 1 sata_mars, Live 0xc0097000
venus_ir_new 13376 5 - Live 0xc0065000
x_io 3408 0 - Live 0xc005c000
cifs 284288 0 - Live 0xc00b9000
venus_gpio 10032 1 - Live 0xc0058000
/bin/ps -w
PID Uid VmSize Stat Command
1 root 2312 S init
2 root 0 SWN [ksoftirqd/0]
3 root 0 SW< [events/0]
4 root 0 SW< [khelper]
5 root 0 SW< [kthread]
6 root 0 SW< [kblockd/0]
7 root 0 SW [khubd]
8 root 0 SW [rpc-1]
9 root 0 SW [rpc-3]
10 root 0 SW [pdflush]
11 root 0 SW [pdflush]
13 root 0 SW< [aio/0]
12 root 0 SW [kswapd0]
15 root 0 SW [eth0]
16 root 0 SW [mtdblockd]
14 root 0 SW [kseriod]
24 root 2312 S init
25 root 2312 S init
28 root 2312 S init
31 root 2312 S init
44 root 0 SW< [cifsoplockd]
45 root 0 SW< [cifsdnotifyd]
51 root 2312 S /sbin/syslogd -s 128 -O /tmp/.log -n -m 0
52 root 2308 S /sbin/klogd -n
55 root 2324 S inetd
84 root 436 S /usr/local/etc/irfake/irfake4 -R -f /usr/local/etc/irfake/irfake.conf
91 root 0 SW< [loop0]
94 root 0 SW< [loop1]
121 root 2316 S /bin/sh /usr/local/etc/mos/bin/rebootd
166 root 444 S /usr/local/sbin/RootApp DvdPlayer
171 root 0 SW< [sata_eh/0]
181 root 0 SW [scsi_eh_0]
186 root 0 SW [scsi_eh_1]
167 root 444 S /usr/local/sbin/RootApp DvdPlayer
194 root 1648 S N /usr/local/etc/mos/bin/vsftpd /usr/local/etc/mos/etc/vsftpd.conf
197 root 790m S < DvdPlayer
202 root 790m S DvdPlayer
203 root 790m S N DvdPlayer
204 root 790m S N DvdPlayer
205 root 444 S /usr/local/sbin/RootApp DvdPlayer
196 root 5388 S N /usr/local/etc/mos/bin/lighttpd -f /usr/local/etc/mos/etc/lighttpd.conf
212 root 18216 S N /usr/local/etc/mos/bin/php
230 root 790m S DvdPlayer
231 root 790m S DvdPlayer
235 root 790m S DvdPlayer
236 root 790m S DvdPlayer
237 root 790m S DvdPlayer
238 root 790m S DvdPlayer
239 root 790m S DvdPlayer
240 root 790m S DvdPlayer
244 root 18756 S N /usr/local/etc/mos/bin/php
245 root 18240 S N /usr/local/etc/mos/bin/php
247 root 790m S DvdPlayer
249 root 790m S DvdPlayer
250 root 790m S DvdPlayer
252 root 790m S DvdPlayer
253 root 790m S DvdPlayer
260 root 790m S DvdPlayer
246 root 18236 S N /usr/local/etc/mos/bin/php
263 root 790m S DvdPlayer
267 root 790m S DvdPlayer
272 root 790m S DvdPlayer
273 root 790m S DvdPlayer
276 root 790m S DvdPlayer
277 root 790m S DvdPlayer
278 root 790m S DvdPlayer
279 root 790m S DvdPlayer
315 root 2312 S /sbin/udhcpc -p /var/lock/udhcpc_eth0.pid -t 15 -b -s /etc/udhcpc.script -i eth0
350 root 790m S DvdPlayer
375 root 0 SW [scsi_eh_2]
376 root 0 SW [usb-storage]
391 root 0 SW [scsi_eh_3]
392 root 0 SW [usb-storage]
415 root 0 SW [RTKTHREAD]
420 root 1644 S /usr/local/bin/_wpa_supplicant -P/var/lock/wpa_supplicant.pid -g/var/run/wpa_supplicant-global -B
5363 root 790m S DvdPlayer
32723 root 0 Z < [S10remount]
32724 root 0 Z < [S12autorun]
32742 root 2308 S sleep 1
32747 root 2316 S N sh -c /bin/ps -w
32748 root 2316 R N /bin/ps -w
/bin/dmesg
] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
Vendor: WDC WD30 Model: EZRX-00MMMB0 Rev:
Type: Direct-Access ANSI SCSI revision: 05
$$$ vrt_dbg scsi_level 0x3
$$$ vrt-debug 0x0
$$$ vrt_dbg scsi_level 0x3
SCSI device sdb: 0 512-byte hdwr sectors (0 MB) physical_block_size:512
sdb: assuming drive cache: write through
disk->capacity:0x0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
FAT: unable to read boot sector
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
/bin/busybox
BusyBox v1.18.5 (2013-10-10 17:37:45 BDT) multi-call binary.
Copyright (C) 1998-2009 Erik Andersen, Rob Landley, Denys Vlasenko
and others. Licensed under GPLv2.
See source distribution for full notice.
Usage: busybox [function] [arguments]...
or: busybox --list[-full]
or: function [arguments]...
BusyBox is a multi-call binary that combines many common Unix
utilities into a single executable. Most people will create a
link to busybox for each function they wish to use and BusyBox
will act like whatever it was invoked as.
Currently defined functions:
[, [[, acpid, add-shell, addgroup, adduser, adjtimex, ar, arp, arping,
ash, awk, basename, bash, blkid, blockdev, bootchartd, brctl, bunzip2,
bzcat, bzip2, cal, cat, catv, chat, chattr, chgrp, chmod, chown,
chpasswd, chpst, chroot, chrt, chvt, clear, cmp, conspy, cp, cpio,
cryptpw, cttyhack, cut, date, dc, dd, deallocvt, delgroup, deluser,
depmod, devfsd, devmem, df, dhcprelay, diff, dirname, dmesg, dnsd,
dnsdomainname, dos2unix, dpkg, dpkg-deb, du, dumpkmap, dumpleases,
echo, ed, egrep, eject, env, envdir, envuidgid, ether-wake, expr,
fakeidentd, false, fbset, fbsplash, fdflush, fdformat, fdisk,
fgconsole, fgrep, find, findfs, flock, fold, free, freeramdisk,
fsck.minix, fsync, ftpd, ftpget, ftpput, fuser, getopt, getty, grep,
gunzip, gzip, halt, hd, hdparm, head, hexdump, hostid, hostname, httpd,
hwclock, id, ifconfig, ifdown, ifenslave, ifplugd, ifup, inetd, init,
insmod, install, iostat, ip, ipaddr, ipcalc, ipcrm, ipcs, iplink,
iproute, iprule, iptunnel, kbd_mode, kill, killall, killall5, klogd,
length, less, linux32, linux64, ln, loadfont, loadkmap, logger, login,
logname, logread, losetup, ls, lsmod, lspci, lsusb, lzcat, lzma, lzop,
lzopcat, makedevs, man, md5sum, mesg, microcom, mkdir, mkdosfs, mkfifo,
mkfs.minix, mkfs.vfat, mknod, mkpasswd, mkswap, mktemp, modinfo,
modprobe, more, mount, mountpoint, mpstat, mt, mv, nameif, nbd-client,
nc, netstat, nice, nmeter, nohup, nslookup, ntpd, od, openvt, passwd,
patch, pgrep, pidof, ping, pipe_progress, pivot_root, pkill, pmap,
poweroff, powertop, printenv, printf, ps, pscan, pwd, raidautorun,
rdate, rdev, readlink, readprofile, realpath, reboot, remove-shell,
renice, reset, resize, rev, rm, rmdir, rmmod, route, rpm, rpm2cpio,
rtcwake, run-parts, runlevel, runsv, runsvdir, rx, script,
scriptreplay, sed, seq, setarch, setconsole, setfont, setkeycodes,
setlogcons, setsid, setuidgid, sh, sha1sum, sha256sum, sha512sum,
showkey, slattach, sleep, smemcap, softlimit, sort, split,
start-stop-daemon, stat, strings, stty, su, sulogin, sum, sv, svlogd,
swapoff, swapon, switch_root, sync, sysctl, syslogd, tac, tail, tar,
tcpsvd, tee, telnet, telnetd, test, tftp, tftpd, time, timeout, top,
touch, tr, traceroute, true, tty, ttysize, tunctl, udhcpc, udhcpd,
udpsvd, umount, uname, uncompress, unexpand, uniq, unix2dos, unlzma,
unlzop, unxz, unzip, uptime, usleep, uuencode, vconfig, vi, vlock,
volname, wall, watch, watchdog, wc, wget, which, whoami, xargs, xz,
xzcat, yes, zcat, zcip
cat /proc/mounts
rootfs / rootfs rw 0 0
/dev/root / yaffs2 rw,noatime 0 0
none /dev devfs rw 0 0
none /proc proc rw,nodiratime 0 0
devpts /dev/pts devpts rw 0 0
none /sys sysfs rw 0 0
/dev/mtdblock/2 /usr/local/etc yaffs2 rw,noatime 0 0
none /tmp ramfs rw 0 0
/dev/rd/0 /mnt/rd vfat rw,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1 0 0
/dev/root /usr/local/etc/mos yaffs2 rw,noatime 0 0
/dev/loop/0 /usr/local/bin squashfs ro 0 0
/dev/loop/1 /usr/local/bin/Resource squashfs ro 0 0
/bin/df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 215.0M 65.4M 149.6M 30% /
/dev/mtdblock/2 4.0M 1.4M 2.6M 36% /usr/local/etc
/dev/rd/0 40.0K 40.0K 0 100% /mnt/rd
/dev/root 215.0M 65.4M 149.6M 30% /usr/local/etc/mos
/dev/loop/0 14.9M 14.9M 0 100% /usr/local/bin
/dev/loop/1 2.7M 2.7M 0 100% /usr/local/bin/Resource
/sbin/fdisk -l
/sbin/ifconfig
eth0 Link encap:Ethernet HWaddr BC:AE:C5:88:16:67
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1860 errors:0 dropped:0 overruns:0 frame:0
TX packets:323 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:623985 (609.3 KiB) TX bytes:128089 (125.0 KiB)
Interrupt:2 Base address:0x6000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1008 (1008.0 B) TX bytes:1008 (1008.0 B)
wlan0 Link encap:Ethernet HWaddr 1C:4B:D6:36:E8:FD
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
/sbin/route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
169.254.0.0 * 255.255.0.0 U 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
cat /etc/resolv.conf
nameserver 127.0.0.1
nameserver 127.0.0.1
nameserver 192.168.1.1
set
HISTFILE='/tmp/.ash_history'
HISTSIZE='1000'
HOME='/'
HOSTNAME='AMP12'
IFS='
'
LD_LIBRARY_PATH='/usr/local/etc/mos/lib:/lib'
OPTIND='1'
PATH='/opt/sbin:/opt/bin:/usr/local/bin:/usr/local/sbin:/usr/local/etc/mos/bin:/sbin:/usr/sbin:/bin:/usr/bin'
PHP_FCGI_CHILDREN='3'
PPID='244'
PS1='\w \$ '
PS2='> '
PS4='+ '
PWD='/tmp/www'
SDL_FBDEV='/dev/fb/0'
SDL_NOMOUSE=''
SHELL='/bin/sh'
TERM='ansi'
TERMINFO='/usr/share/terminfo'
TZ='MSK-3MSD,M3.5.0,M10.5.0/3'
USER='root'
Диск целиком под gpt одним разделом на весь объем.
Users browsing this forum: No registered users and 42 guests