Dr.HD XS300i прошивка

Re: Dr.HD XS300i прошивка

Postby exotsk » 29 Jun 2015, 11:46

=) Ну сами подумайте, что можно сделать не так ? прошил, поставлю самый маленький скин, установил несколько модулей осталось 16 мб из 35 свободных. Поставил IPTVlist прописал динамический плейлист из уфы. запустил. DLNA отключен. флешки убрал. (хотя по сути это нормально когда длна поднят и нормальная флешка подключена к плееру). Как то так :) Меня вырубил полуторамесячный геморрой с восстановлением плеера, (и от этого никто не застрахован) и 64 мб флеша :) это они 15 руб сэкономили ? Просто есть с чем сравнивать: Лохматый 3Q420 летает с р12, и показывает все. К хорошему быстро привыкаешь :))
3Q-420HW - AMP R12 Iconbit Skin
Iconbit XDS42GL - Inext R5 1.17 только нижняя ссылка
exotsk
 
Posts: 23
Joined: 08 May 2015, 09:01

Re: Dr.HD XS300i прошивка

Postby FarVoice » 29 Jun 2015, 12:18

с чего 64 метра флеша? У вас флеша как и у всех 256 метров.
гляньте
cat /proc/nandinfo
3q420 и ДрХД - близнецы братья. И должны работать примерно одинаково.
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8573
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: Dr.HD XS300i прошивка

Postby exotsk » 29 Jun 2015, 20:59

блин, меня тоже экономия 64МБ!! 100мб. занепоянтила. Прошивал штатно, р12 + скин подтянул после. обычно 140 мб оставалось, что на XDS42 что на 3Q. Почему на раздел ему оставили 36 мегов я не знаю. Причем DrHD хвалятся именно MOSr12 на сайте. Когда достал его из коробки, начал устанавливать прямо с плеера, после установки чуть более чем нескольких приложений, он отказался устанавливать дальше. я думаю весь мос потянет на 60 мб. (не читал не в курсе) и пришел после ремонта с 35 мегами свободной памяти. Я понял, доберусь как нить до консоли. глянете "подноготную" ДрХД :))
помню в каком то сисинфо (в консоли) было (видимо на вар памяти) 64мб.
сечйас его нет под рукой %)) но я за него в ответе :)))))) ибо насоветовал....
ЗЫЫ2 здесь на Вы всегда было ? просто я со времен ФИДО как то на Вы не могу отписывать.
3Q-420HW - AMP R12 Iconbit Skin
Iconbit XDS42GL - Inext R5 1.17 только нижняя ссылка
exotsk
 
Posts: 23
Joined: 08 May 2015, 09:01

Re: Dr.HD XS300i прошивка

Postby FarVoice » 29 Jun 2015, 23:15

ну все мы были молодыми, бородатыми и сидели ночами на BBS и читали конфы :))
2:5002 рулеззз!!!
По поводу nogui - мы вроде поправили... Не помню уже.
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8573
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: Dr.HD XS300i прошивка

Postby exotsk » 30 Jun 2015, 20:51

2:5005 =)
nogui не железный косяк ?
3Q-420HW - AMP R12 Iconbit Skin
Iconbit XDS42GL - Inext R5 1.17 только нижняя ссылка
exotsk
 
Posts: 23
Joined: 08 May 2015, 09:01

Re: Dr.HD XS300i прошивка

Postby FarVoice » 30 Jun 2015, 20:54

нет. косяк был в инициализации FB в минигуй из-за древнего бута в ДрХД. Но вроде Virtual поправил...
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8573
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: Dr.HD XS300i прошивка

Postby exotsk » 21 Jul 2015, 06:43

В общем добрался до этой балалайки вчера. Попытался настроить.Работает можно сказать что не работает, включаю пинг на него, пытаюсь, что нибудь запустить на плеере. Результат один, плеер залипает.
Снял сисинфо с вебморды. эта строчка меня смущает "One HY27UF081G2A chip has 1 die(s) on board" т.е. один 128мб мертвый. И он был мертвый с самого начала. тогда все совпадает, 256 -128 - прошиква - гуй = 30-40 мегов. Я прав ?

SYSINFO | +
Linux AMP12 2.6.12.6-VENUS #AMP12.5 Mon Nov 25 18:47:23 BDT 2013 mips GNU/Linux

cat /proc/cpuinfo
system type : Realtek Venus
processor : 0
cpu model : MIPS 24K V7.8
BogoMIPS : 269.51
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes
ASEs implemented : mips16
VCED exceptions : not available
VCEI exceptions : not available

cat /proc/meminfo
MemTotal: 120676 kB
MemFree: 8472 kB
Buffers: 864 kB
Cached: 26292 kB
SwapCached: 0 kB
Active: 12472 kB
Inactive: 20060 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 120676 kB
LowFree: 8472 kB
SwapTotal: 32 kB
SwapFree: 32 kB
Dirty: 0 kB
Writeback: 0 kB
Mapped: 15132 kB
Slab: 7252 kB
CommitLimit: 60368 kB
Committed_AS: 17244 kB
PageTables: 636 kB
VmallocTotal: 1048548 kB
VmallocUsed: 1836 kB
VmallocChunk: 1046112 kB

/sbin/lsmod
sata_mars 22080 0 - Live 0xc008d000
libata 55696 1 sata_mars, Live 0xc0097000
rt5572sta 627808 1 - Live 0xc01c6000
venus_ir_new 13376 5 - Live 0xc005e000
x_io 3408 0 - Live 0xc005c000
ohci_hcd 21904 0 - Live 0xc0064000
ehci_hcd 43552 0 - Live 0xc006b000
cifs 284288 0 - Live 0xc00b9000
venus_gpio 10032 1 - Live 0xc0058000

/bin/ps -w
PID Uid VmSize Stat Command
1 root 2312 S init
2 root 0 SWN [ksoftirqd/0]
3 root 0 SW< [events/0]
4 root 0 SW< [khelper]
5 root 0 SW< [kthread]
6 root 0 SW< [kblockd/0]
7 root 0 SW [khubd]
8 root 0 SW [rpc-1]
9 root 0 SW [rpc-3]
10 root 0 SW [pdflush]
11 root 0 SW [pdflush]
13 root 0 SW< [aio/0]
12 root 0 SW [kswapd0]
15 root 0 SW [eth0]
16 root 0 SW [mtdblockd]
14 root 0 SW [kseriod]
24 root 2312 S init
25 root 2312 S init
28 root 2312 S init
31 root 2312 S init
44 root 2324 S inetd
47 root 0 SW< [cifsoplockd]
48 root 0 SW< [cifsdnotifyd]
67 root 2312 S /sbin/syslogd -s 128 -O /tmp/.log -n -m 0
68 root 2308 S /sbin/klogd -n
98 root 448 S /usr/local/etc/irfake/irfake4 -R -f /usr/local/etc/irfake/irfake.conf
106 root 0 SW< [loop0]
133 root 2316 S /bin/sh /usr/local/etc/mos/bin/rebootd
160 root 2316 S /usr/local/etc/mos/bin/httpd -c /usr/local/etc/mos/etc/httpd.conf -h /tmp/www -p 88
179 root 2708 S /usr/local/sbin/RootApp DvdPlayer
184 root 0 SW< [sata_eh/0]
195 root 0 SW [scsi_eh_0]
203 root 2708 S /usr/local/sbin/RootApp DvdPlayer
206 root 1648 S N /usr/local/etc/mos/bin/vsftpd /usr/local/etc/mos/etc/vsftpd.conf
208 root 787m S < DvdPlayer
196 root 0 SW [scsi_eh_1]
210 root 2708 S /usr/local/sbin/RootApp DvdPlayer
214 root 787m S DvdPlayer
221 root 787m S N DvdPlayer
222 root 787m S N DvdPlayer
236 root 787m S DvdPlayer
237 root 787m S DvdPlayer
245 root 8200 S N /usr/local/etc/mos/bin/lighttpd -f /usr/local/etc/mos/etc/lighttpd.conf
248 root 787m S DvdPlayer
249 root 787m S DvdPlayer
250 root 787m S DvdPlayer
251 root 787m S DvdPlayer
252 root 787m S DvdPlayer
253 root 787m S DvdPlayer
247 root 18604 S N /usr/local/etc/mos/bin/php
255 root 787m S DvdPlayer
257 root 787m S DvdPlayer
258 root 787m S DvdPlayer
259 root 787m S DvdPlayer
260 root 787m S DvdPlayer
268 root 18628 S N /usr/local/etc/mos/bin/php
269 root 18604 S N /usr/local/etc/mos/bin/php
270 root 19148 S N /usr/local/etc/mos/bin/php
272 root 787m S DvdPlayer
273 root 787m S DvdPlayer
283 root 787m S DvdPlayer
287 root 0 SW [RtmpTimerTask]
288 root 0 SW [RtmpMlmeTask]
289 root 0 SW [RtmpCmdQTask]
291 root 787m S DvdPlayer
292 root 787m S DvdPlayer
294 root 787m S DvdPlayer
295 root 787m S DvdPlayer
296 root 787m S DvdPlayer
297 root 787m S DvdPlayer
309 root 1644 S ./wpa_supplicant -P/var/lock/wpa_supplicant.pid -g/var/run/wpa_supplicant-global -B
497 root 2308 S sleep 1
506 root 2316 S N sh -c /bin/ps -w
507 root 2316 R N /bin/ps -w

/bin/dmesg
Linux version 2.6.12.6-VENUS (vadmin@vadmin) (gcc version 3.4.4 mipssde-6.03.00-20051020) #AMP12.5 Mon Nov 25 18:47:23 BDT 2013
audio addr: 1b00000
CPU revision is: 00019378
Determined physical RAM map:
memory: 00100000 @ 00000000 (usable)
memory: 0041b000 @ 00100000 (reserved)
memory: 015e5000 @ 0051b000 (usable)
memory: 00500000 @ 01b00000 (reserved)
memory: 06000000 @ 02000000 (usable)
show info: max_low_pfn:32768
show info: min_low_pfn:1307
On node 0 totalpages: 32768
DMA zone: 8192 pages, LIFO batch:3
ZONE: DMA, PFN: 0
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
DVR zone: 24576 pages, LIFO batch:15
ZONE: DVR, PFN: 8192
Built 1 zonelists
Kernel command line: rootfstype=yaffs2 root=31:01 mtdparts=rtk_nand:24704k,95616k(/),4096k(/usr/local/etc),6656k console=ttyS0,115200n8r ip=192.168.0.9::192.168.0.254:255.0.0.0:::
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 256 (order: 8, 4096 bytes)
Estimate value: CPU frequency 405.01 MHz
Using 27.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 119576k/121748k available (3336k kernel code, 2112k reserved, 568k data, 144k init, 0k highmem)
Calibrating delay loop... 269.51 BogoMIPS (lpj=1347584)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
========== board id: 202 ==========
[INFO] neptune mode...
boot_param value: a0002800
mode: -2052766600
Se logo mode to PAL
size: -1381896640
color1: 0x5902e059
color2: 0x40541
color3: 0x285413
color4: 0xc7881848
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
se init module major number = 254
size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52...
[user land] CmdBuf virt addr = 80650000/a0650000, phy addr=00650000
Hello, Realtek TLB Mapper
AllocBP size: 294912 order: 7
<<>>
0: 0
1: 0
2: 0
3: 0
4: 0
5: 0
6: 0
7: 0
8: 0
9: 0
10: 0
11: 0
12: 6
Addr: 87000000, order: 12
Addr: 86000000, order: 12
Addr: 85000000, order: 12
Addr: 84000000, order: 12
Addr: 83000000, order: 12
Addr: 82000000, order: 12
squashfs: version 3.1 (2006/08/19) Phillip Lougher
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
YAFFS Driver Rev:292241 (2010-01-19)
YAFFS Driver is successfully installing.
Initializing Cryptographic API
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
io scheduler noop registered
RAMDISK driver initialized: 1 RAM disks of 128K size 1024 blocksize
loop: loaded (max 8 devices)
this MARS eth RX_OFFSET = 0x0
8139cplus: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
MAC address = 0x00.11.22.33.44.55
eth0: RTL-8139C+ at 0xb8016000, 00:11:22:33:44:55, IRQ 2
physmap flash device: 8000000 at 17d00000
CFI: Found no phys_mapped_flash device at location zero
Realtek NAND Flash Driver Rev:317223 (2010-06-01)
One HY27UF081G2A chip has 1 die(s) on board
cp_hotplug
nand part=HY27UF081G2A, id=adf1801d, device_size=134217728, chip_size=134217728, num_chips=1, isLastPage=0
[NF_CKSEL] HY27UF081G2A is set to nf clock: 0x3
[rtk_nand_scan_bbt] have created bbt B0, just loads it !!
[dump_BBT] Nand BBT Content
Congratulation!! No BBs in this Nand.
4 cmdlinepart partitions found on MTD device rtk_nand
RTK: using dynamic nand partition
Creating 4 MTD partitions on "rtk_nand":
0x00000000-0x01820000 : "Partition_000"
0x01820000-0x07580000 : "/"
0x07580000-0x07980000 : "/usr/local/etc"
0x07980000-0x08000000 : "Partition_003"
0x00000000-0x08000000 : "disc"
Realtek Nand Flash Driver is successfully installing.
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
[I2C0] i2c speed changed to 100 KHz
I2C0 Bus Status Check.... OK
=========================
= VER : 2.1b
=========================
= PHY : 0
= MODE: MARS/JUPITER
= SPD : 100
= SAR : 0x024 (7 bits)
= TX FIFO DEPTH : 8
= RX FIFO DEPTH : 8
= FIFO THRESHOLD: 4
= BUS JAM RECORVER 3: ON
= NON STOP WRITE : ON
= GPIO RW SUPPORT : ON
=========================
FATAL : I2C 1 pins have been occupied by PCI
Trying to free free IRQ3
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
Realtek Venus Power Management, (c) 2006 Realtek Semiconductor Corp.
cp_open
alloc rings cp->rxdesc_buf =0xa1aa4000 , cp->ring_dma=0x1aa4000
init_hw
init_hw finished
IP-Config: Complete:
device=eth0, addr=192.168.0.9, mask=255.0.0.0, gw=192.168.0.254,
host=192.168.0.9, domain=, nis-domain=(none),
bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
yaffs: dev is 32505857 name is "mtdblock1"
yaffs: Attempting MTD mount on 31.1, "mtdblock1"
RTK rtc cannot work.
yaffs: restored from checkpoint
VFS: Mounted root (yaffs2 filesystem) readonly.
Mounted devfs on /dev
Freeing prom memory: 0kb freed
Reclaim bootloader memory from 80020000 to 80100000
Freeing unused kernel memory: 144k freed
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
[usb_param] setting for mars
Setting for MARS-B
[usb_param] set port two for host!
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 1 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 2 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_39(417) tx_delay 1
[usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
[usb2_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
ehci_hcd ehci_hcd: EHCI Host Controller
ehci_hcd ehci_hcd: new USB bus registered, assigned bus number 1
ehci_hcd ehci_hcd: irq 2, io mem 0xb8013000
ehci_hcd ehci_hcd: park 0
ehci_hcd ehci_hcd: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub : individual port power switching
hub : individual port over-current protection
[cfyeh] set PPE = 0
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[usb_param] setting for mars
Setting for MARS-B
[usb_param] set port two for host!
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 1 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 2 dr 0
#@# cfyeh-debug USBPHY_SetReg_Default_39(417) tx_delay 1
[usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
[usb2_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
[usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
[usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
[usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
[usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
ohci_hcd ohci_hcd: OHCI Host Controller
ohci_hcd ohci_hcd: new USB bus registered, assigned bus number 2
ohci_hcd ohci_hcd: irq 2, io mem 0xb8013400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub : no power switching (usb 1.0)
hub : no over-current protection
usb 1-1: new high speed USB device using ehci_hcd and address 2
###################################################################
[cfyeh-test] usb_set_configuration(1454)
Don't support this usb device or don't insert correct module yet!!!
bus_id 1-1:1.0 (config #1, interface 0)
###################################################################
x_io mod (C)Virtual, ver:1.0.0.4.
Old VenusIR driver found at 80493b58
Found venus_ir_cleanup_module() @ 0x8010861c
venus_ir_cleanup_module() called
New Venus IR driver loaded
rtusb init rt2870 --->
usbcore: registered new driver rt2870
set corepath: /tmp/hdd/volumes/HDD1/
libata version 1.12 loaded..
sata driver initial...2009/12/30 14:50
sata driver patched 2013/02/07 (Virtual)
mars_init_sata(1270)dev_addr:c00921f0
ata_device_add(4893)probe begin
scsi0 : SATA_DRV
sata dma reset
***128MB version...
Memory address 0x40000000
sata1: no device found (phy stat 00000000)
sata1: ata_bus_probe failed
scsi1 : SATA_DRV
sata dma reset
+++ ALLOC index: 20480 order: 8
1. start remap DVR zone 87000000(805fc000) 256...
map_done is 0...
+++ ALLOC index: 20992 order: 9
1. start remap DVR zone 87200000(80600000) 512...
map_done is 0...
+++ ALLOC index: 20736 order: 7
1. start remap DVR zone 87100000(805fe000) 128...
map_done is 124...
+++ ALLOC index: 20864 order: 7
1. start remap DVR zone 87180000(805ff000) 128...
map_done is 128...
+++ ALLOC index: 22528 order: 11
1. start remap DVR zone 87800000(8060c000) 2048...
map_done is 0...
+++ ALLOC index: 21504 order: 8
1. start remap DVR zone 87400000(80604000) 256...
map_done is 256...
+++ ALLOC index: 22016 order: 9
1. start remap DVR zone 87600000(80608000) 512...
sata2: no device found (phy stat 00000000)
sata2: ata_bus_probe failed
map_done is 510...
[I2C0] i2c speed changed to 50 KHz
[I2C0] i2c speed changed to 50 KHz
Node 0, zone DMA 1 0 1 1 1 0 0 1 1 1 1 0 0
free pages: 1949
Node 0, zone DVR 0 1 0 0 1 0 1 0 1 0 1 1 2
free pages: 11602
cached size: 8036
try_to_free_pages: free 980
Node 0, zone DMA 83 66 47 28 17 3 0 1 1 1 1 0 0
free pages: 2915
Node 0, zone DVR 38 13 14 12 6 3 1 0 1 0 1 1 2
free pages: 11992
cached size: 7604
+++ ALLOC index: 16384 order: 12
1. start remap DVR zone 86000000(805dc000) 4096...
map_done is 0...
+++ ALLOC index: 12288 order: 10
1. start remap DVR zone 85000000(805bc000) 1024...
map_done is 0...
+++ ALLOC index: 21760 order: 3
1. start remap DVR zone 87500000(80606000) 8...
map_done is 8...
Node 0, zone DMA 62 49 34 14 12 7 3 1 1 1 1 0 0
free pages: 2936
Node 0, zone DVR 1 19 13 17 8 3 1 0 1 0 2 2 0
free pages: 6915
cached size: 7604
try_to_free_pages: free 0
Node 0, zone DMA 56 49 34 14 12 7 3 1 1 1 1 0 0
free pages: 2930
Node 0, zone DVR 1 19 13 17 8 3 1 0 1 0 2 2 0
free pages: 6915
cached size: 7604
+++ ALLOC index: 8192 order: 12
1. start remap DVR zone 84000000(8059c000) 4096...
map_done is 641...
Node 0, zone DMA 56 49 34 14 12 7 3 1 1 1 1 0 0
free pages: 2930
Node 0, zone DVR 0 1 1 0 0 0 0 0 1 1 0 1 0
free pages: 2822
cached size: 7605
try_to_free_pages: free 0
Node 0, zone DMA 56 49 34 14 12 7 3 1 1 1 1 0 0
free pages: 2930
Node 0, zone DVR 0 1 1 0 0 0 0 0 1 1 0 1 0
free pages: 2822
cached size: 7605
+++ ALLOC index: 4096 order: 12
1. start remap DVR zone 83000000(8057c000) 4096...
map_done is 4095...
0x1300 = 00064300
This is the current time: PowerUP_Done!!!
+++ ALLOC index: 13312 order: 8
1. start remap DVR zone 85400000(805c4000) 256...
map_done is 256...
--- FREE index: 13312 order: 8

/bin/busybox
BusyBox v1.18.5 (2013-10-10 17:37:45 BDT) multi-call binary.
Copyright (C) 1998-2009 Erik Andersen, Rob Landley, Denys Vlasenko
and others. Licensed under GPLv2.
See source distribution for full notice.

Usage: busybox [function] [arguments]...
or: busybox --list[-full]
or: function [arguments]...

BusyBox is a multi-call binary that combines many common Unix
utilities into a single executable. Most people will create a
link to busybox for each function they wish to use and BusyBox
will act like whatever it was invoked as.

Currently defined functions:
[, [[, acpid, add-shell, addgroup, adduser, adjtimex, ar, arp, arping,
ash, awk, basename, bash, blkid, blockdev, bootchartd, brctl, bunzip2,
bzcat, bzip2, cal, cat, catv, chat, chattr, chgrp, chmod, chown,
chpasswd, chpst, chroot, chrt, chvt, clear, cmp, conspy, cp, cpio,
cryptpw, cttyhack, cut, date, dc, dd, deallocvt, delgroup, deluser,
depmod, devfsd, devmem, df, dhcprelay, diff, dirname, dmesg, dnsd,
dnsdomainname, dos2unix, dpkg, dpkg-deb, du, dumpkmap, dumpleases,
echo, ed, egrep, eject, env, envdir, envuidgid, ether-wake, expr,
fakeidentd, false, fbset, fbsplash, fdflush, fdformat, fdisk,
fgconsole, fgrep, find, findfs, flock, fold, free, freeramdisk,
fsck.minix, fsync, ftpd, ftpget, ftpput, fuser, getopt, getty, grep,
gunzip, gzip, halt, hd, hdparm, head, hexdump, hostid, hostname, httpd,
hwclock, id, ifconfig, ifdown, ifenslave, ifplugd, ifup, inetd, init,
insmod, install, iostat, ip, ipaddr, ipcalc, ipcrm, ipcs, iplink,
iproute, iprule, iptunnel, kbd_mode, kill, killall, killall5, klogd,
length, less, linux32, linux64, ln, loadfont, loadkmap, logger, login,
logname, logread, losetup, ls, lsmod, lspci, lsusb, lzcat, lzma, lzop,
lzopcat, makedevs, man, md5sum, mesg, microcom, mkdir, mkdosfs, mkfifo,
mkfs.minix, mkfs.vfat, mknod, mkpasswd, mkswap, mktemp, modinfo,
modprobe, more, mount, mountpoint, mpstat, mt, mv, nameif, nbd-client,
nc, netstat, nice, nmeter, nohup, nslookup, ntpd, od, openvt, passwd,
patch, pgrep, pidof, ping, pipe_progress, pivot_root, pkill, pmap,
poweroff, powertop, printenv, printf, ps, pscan, pwd, raidautorun,
rdate, rdev, readlink, readprofile, realpath, reboot, remove-shell,
renice, reset, resize, rev, rm, rmdir, rmmod, route, rpm, rpm2cpio,
rtcwake, run-parts, runlevel, runsv, runsvdir, rx, script,
scriptreplay, sed, seq, setarch, setconsole, setfont, setkeycodes,
setlogcons, setsid, setuidgid, sh, sha1sum, sha256sum, sha512sum,
showkey, slattach, sleep, smemcap, softlimit, sort, split,
start-stop-daemon, stat, strings, stty, su, sulogin, sum, sv, svlogd,
swapoff, swapon, switch_root, sync, sysctl, syslogd, tac, tail, tar,
tcpsvd, tee, telnet, telnetd, test, tftp, tftpd, time, timeout, top,
touch, tr, traceroute, true, tty, ttysize, tunctl, udhcpc, udhcpd,
udpsvd, umount, uname, uncompress, unexpand, uniq, unix2dos, unlzma,
unlzop, unxz, unzip, uptime, usleep, uuencode, vconfig, vi, vlock,
volname, wall, watch, watchdog, wc, wget, which, whoami, xargs, xz,
xzcat, yes, zcat, zcip


cat /proc/mounts
rootfs / rootfs rw 0 0
/dev/root / yaffs2 rw,noatime 0 0
none /dev devfs rw 0 0
none /proc proc rw,nodiratime 0 0
devpts /dev/pts devpts rw 0 0
none /sys sysfs rw 0 0
/dev/mtdblock/2 /usr/local/etc yaffs2 rw,noatime 0 0
none /tmp ramfs rw 0 0
/dev/rd/0 /mnt/rd vfat rw,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1 0 0
/dev/root /usr/local/etc/mos yaffs2 rw,noatime 0 0
/dev/loop/0 /usr/local/bin squashfs ro 0 0

/bin/df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 93.4M 77.8M 15.6M 83% /
/dev/mtdblock/2 4.0M 1.5M 2.5M 37% /usr/local/etc
/dev/rd/0 40.0K 40.0K 0 100% /mnt/rd
/dev/root 93.4M 77.8M 15.6M 83% /usr/local/etc/mos
/dev/loop/0 15.4M 15.4M 0 100% /usr/local/bin

/sbin/fdisk -l

/sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:11:22:33:44:55
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:2 Base address:0x6000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:61 errors:0 dropped:0 overruns:0 frame:0
TX packets:61 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4858 (4.7 KiB) TX bytes:4858 (4.7 KiB)

wlan0 Link encap:Ethernet HWaddr 00:0F:54:15:D0:B6
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:297 errors:0 dropped:0 overruns:0 frame:0
TX packets:106 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:56632 (55.3 KiB) TX bytes:55917 (54.6 KiB)


/sbin/route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 wlan0
169.254.0.0 * 255.255.0.0 U 0 0 0 wlan0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default MyRouter.Home 0.0.0.0 UG 0 0 0 wlan0

cat /etc/resolv.conf
nameserver 127.0.0.1
domain Home
nameserver 192.168.1.1

set
HISTFILE='/tmp/.ash_history'
HISTSIZE='1000'
HOME='/'
HOSTNAME='AMP12'
IFS='
'
LD_LIBRARY_PATH='/usr/local/etc/mos/lib:/lib'
OPTIND='1'
PATH='/opt/sbin:/opt/bin:/usr/local/bin:/usr/local/sbin:/usr/local/etc/mos/bin:/sbin:/usr/sbin:/bin:/usr/bin'
PHP_FCGI_CHILDREN='3'
PPID='270'
PS1='\w \$ '
PS2='> '
PS4='+ '
PWD='/tmp/www'
SDL_FBDEV='/dev/fb/0'
SDL_NOMOUSE=''
SHELL='/bin/sh'
TERM='ansi'
TERMINFO='/usr/share/terminfo'
TZ='MSK-3MSD,M3.5.0,M10.5.0/3'
USER='root'
3Q-420HW - AMP R12 Iconbit Skin
Iconbit XDS42GL - Inext R5 1.17 только нижняя ссылка
exotsk
 
Posts: 23
Joined: 08 May 2015, 09:01

Re: Dr.HD XS300i прошивка

Postby Virtual » 21 Jul 2015, 08:06

HY27UF081G2A 0x1D80F1AD // Hynix 1Gb (SLC single die) 2nd generation
SLC single die обозначает что на борту чипа 1 матрица :)
1Gbit /8=128мбайт
марсы: HDS7 (смотрелка AMP скин vrt уже без вариантов)
HDR12 AMP (обычно сервер с RAM 256 и возможностью подключить 2 SATA диска 2T+)
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.90 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6432
Joined: 01 Oct 2010, 17:17
Location: UFA RU

Re: Dr.HD XS300i прошивка

Postby albelt » 12 Oct 2015, 17:41

2 FarVoice

А можно еще раз выложить прошивку для DrHD XS-300i?
Ссылочка http://farvoice.dtdns.net:4080/fw/dr_hd_xs300i.zip не работает...
Dr.HD XS300i (Realtek RTD1073DD) AMP_r12
Konoos MS-500(Realtek RTD1073DD)AMP_r12
Konoos GV-4000(Realtek RTD1185DD)GV4000_MOS
MoS3, router Dlink 808
albelt
 
Posts: 45
Joined: 08 Mar 2013, 22:04

Re: Dr.HD XS300i прошивка

Postby FarVoice » 12 Oct 2015, 20:58

ушёл с dtdns.net ибо хотят денег....
http://farvoice.ru:4080/fw/dr_hd_xs300i.zip
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8573
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

PreviousNext

Return to Совсем другие

Who is online

Users browsing this forum: No registered users and 1 guest

cron