In HD2 skin I see Opera. But where can I start Opera? Does it work?
Cheers
polo wrote:Уже как месяц плеер на этой прошивке - все отлично, но выяснился мелкий глюк: после установки инсталлера для TVonTop 2.0 на скине xTreamer Pro при нажатии ">|" или "1" не обновляется модуль (кнопки не отрабатывают и ничего не происходит). При переходе на скин HD2 кнопка >| отработала и модуль обновился.
arosman wrote:Best wishes for 2012.
I have a question. When you install this firmware on xtreamer MK1 that have internal hdd installed. Which hdd format do you recomend? ntfs or ext3. Please explain your suggestion.
Sorry for writing in english, I haven't use my Russian for a long time.
usercard wrote:Скажите как прошить прошивку на xtreamer mk1? если можно пошагово или хотя бы ссылку где можно прочитать
http://www.xtreamer.net/downloads/xtreamer/firmware/ver-2-7.aspx wrote:Emergency firmware download and installation instructions
Before starting the procedure of emergency recovery - Please make sure you are using the AV RCA cables and not HDMI. Some TV HDCP protocols may cause problem to show the procedure on TV.
(1) Download the Xtreamer Emergency file
(2) Extract the file install.img
(3) Format a USB stick FAT32 and copy the “install.img” file to the root.
(4) Disconnect all the cables, remove WIFI antenna and any other USB storage devices. Take the unit out of the electricty power on the wall for 30 minutes. Plug the power in again.
(5) In Remote control, press “Home”(release button) -> “3”(release button) -> “Power”(release button). Press the buttons with a 1 sec pause.
Any other sequence will fail and nothing will happen as the call for this procedure is initiated by HOME button pressed first...
If the firmware is not in the root of the USB the process will fail as the process seek the .img in the USB root.
Process Emergency upgrade should be visible on the screen if done correct.
Users browsing this forum: No registered users and 9 guests