smart (S.M.A.R.T.) информацию подключённых дисков.

Чего не хватает в пакете

smart (S.M.A.R.T.) информацию подключённых дисков.

Postby Myriogon » 25 Nov 2010, 22:15

Нет ли возможности выводить smart-информацию дисков? А то диск там, что с ним происходит - неизвестно. А так и температуру видно будет и прочие важные параметры. Опять же, внезапно помереть вероятность снизится у диска. Насколько я понимаю, есть набор утилит smartmontools, выглядящий подходящим для этих целей. Но я не знаю, пойдёт ли он на этом устройстве? У меня, по крайней мере не получилось никакую информацию добыть о винте, хоть и запустилась утилита :-). А так в блоке Информация в веб-морде - очень даже уместно смотрелось бы.
Asus O!Play HDP-R3. AMP R12.5. VRT 6.12; Сеть: кабель, DLink Dir-655;
Asus O!Play HDP-R1. AMP R12.5. VRT 6.12
Myriogon
 
Posts: 30
Joined: 08 Nov 2010, 11:30

Re: smart (S.M.A.R.T.) информацию подключённых дисков.

Postby scorpion555 » 29 Apr 2011, 18:28

Тоже хотелось бы иметь возможность хоть в UI, хоть програмно (через команды telnet) получить информацию о подключенном по eSATA винчестере. В принципе, интересует только температура.
Спасибо.
Asus O!Play HD1 прошивка amp_r8_hd2
scorpion555
 
Posts: 5
Joined: 29 Apr 2011, 18:24

Re: smart (S.M.A.R.T.) информацию подключённых дисков.

Postby Bob_St » 17 Aug 2012, 19:17

Прошивка АМР8, установил в МОS3 сервис SMART HDD Tool (smartctl 5.41), перегрузил по питанию плеер и внешний eSATA накопитель. Топчу в Диагностика HDD (SMART) - видно только шапоку меню MOS3 и надпись Диагностика HDD (SMART) и пусто. Ожидал минут 10 результата, тишина :( Переустанвивал заново сервис и повторял вышеприведенные действия - рельтат прежний, глухо, как втанке :|

Через телнет скармливаю команду smartctl , дык пишет ответ, что smartctl: can't load library 'libstdc++.so.6'
ан нет типа такой библиотеки. Забыли чтоль библиотеку в АМР8 положить ?
xTreamer Pro(amp_r12_VRT/noGUI, WD10EARS:128Мb swap+ext3); eth0
User avatar
Bob_St
 
Posts: 108
Joined: 18 Nov 2010, 16:13
Location: Україна, Слобожа́нщина

Re: smart (S.M.A.R.T.) информацию подключённых дисков.

Postby FarVoice » 01 Sep 2012, 00:11

да нет, вроде libstdc++.so.6 присутствует в /lib
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: smart (S.M.A.R.T.) информацию подключённых дисков.

Postby Bob_St » 01 Sep 2012, 15:45

Опа, а у меня его там и нету :)
| +
Image

Лана, винт все равно уже подкидывал к персоналке и проходил Викторией (9 секторов ремапнула), потом со Слаки натравил fschk на проблемный раздел (тож оказывается не все гладко было, поправило чуток ошибок) и там же smartdctl испробовал.
Кстати глюки с произвольным перезапуском DvdPlayer, вылетом некоторых свервисов (фтп сервер, транс, своп) из MOS3 и тормоза с заходом на GUI транса сейчас пропали. 8-)
xTreamer Pro(amp_r12_VRT/noGUI, WD10EARS:128Мb swap+ext3); eth0
User avatar
Bob_St
 
Posts: 108
Joined: 18 Nov 2010, 16:13
Location: Україна, Слобожа́нщина

Re: smart (S.M.A.R.T.) информацию подключённых дисков.

Postby fireicon » 07 Aug 2013, 23:25

У меня в модулях доступных для установки нет SMART HDD Tool (smartctl 5.41) его можно как-то установить вручную?
3Q F375HW inext_hd1_222_r2, Digma HDMP-510 RTD1186 inext_hd_v2.14_moS_r0, iconBIT XDS1003D RTD1186 inext_hd_v2.14_moS_r0
fireicon
 
Posts: 36
Joined: 07 Nov 2012, 23:16

Re: smart (S.M.A.R.T.) информацию подключённых дисков.

Postby FarVoice » 09 Aug 2013, 11:17

поставить то вы его поставите, а вот работать он не будет, ибо там спец дрова SATA . Хотя, если закомментить загрузку родных и подгузить из модуля, может и прокатит.
Установка ручками:
Code: Select all
pm install smarttool alone
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow

Re: smart (S.M.A.R.T.) информацию подключённых дисков.

Postby fireicon » 09 Aug 2013, 18:20

FarVoice большое спасибо! Поставил на Digma HDMP-510 RTD1186 Bast Castle v1.03 и ничего менять не пришлось - модуль заработал сразу:
| +
Code: Select all
smartctl 5.41 2011-06-09 r3365 [mips-linux-2.6.34-VENUS] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     ST500LM012 HN-M500MBB
Serial Number:    S2U3J9CC204165
LU WWN Device Id: 5 0004cf 206eb59ee
Firmware Version: 2AR10001
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Fri Aug  9 14:09:45 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       ( 6660) seconds.
Offline data collection
capabilities:           (0x5b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               No Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     ( 111) minutes.
SCT capabilities:           (0x003f)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   100   100   051    -    0
  2 Throughput_Performance  -OS--K   252   252   000    -    0
  3 Spin_Up_Time            PO---K   091   091   025    -    2860
  4 Start_Stop_Count        -O--CK   100   100   000    -    137
  5 Reallocated_Sector_Ct   PO--CK   252   252   010    -    0
  7 Seek_Error_Rate         -OSR-K   252   252   051    -    0
  8 Seek_Time_Performance   --S--K   252   252   015    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    66
 10 Spin_Retry_Count        -O--CK   252   252   051    -    0
 11 Calibration_Retry_Count -O--CK   252   252   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    63
191 G-Sense_Error_Rate      -O---K   252   252   000    -    0
192 Power-Off_Retract_Count -O---K   252   252   000    -    0
194 Temperature_Celsius     -O----   064   056   000    -    34 (Min/Max 23/47)
195 Hardware_ECC_Recovered  -O-RCK   100   100   000    -    0
196 Reallocated_Event_Count -O--CK   252   252   000    -    0
197 Current_Pending_Sector  -O--CK   252   252   000    -    0
198 Offline_Uncorrectable   ----CK   252   252   000    -    0
199 UDMA_CRC_Error_Count    -OS-CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   -O-R-K   100   100   000    -    1
223 Load_Retry_Count        -O--CK   252   252   000    -    0
225 Load_Cycle_Count        -O--CK   100   100   000    -    939
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
GP/S  Log at address 0x00 has    1 sectors [Log Directory]
SMART Log at address 0x01 has    1 sectors [Summary SMART error log]
SMART Log at address 0x02 has    2 sectors [Comprehensive SMART error log]
GP    Log at address 0x03 has    2 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has    1 sectors [SMART self-test log]
GP    Log at address 0x07 has    2 sectors [Extended self-test log]
GP    Log at address 0x08 has    2 sectors [Power Conditions]
SMART Log at address 0x09 has    1 sectors [Selective self-test log]
GP    Log at address 0x10 has    1 sectors [NCQ Command Error]
GP    Log at address 0x11 has    1 sectors [SATA Phy Event Counters]
GP/S  Log at address 0x80 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x81 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x82 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x83 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x84 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x85 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x86 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x87 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x88 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x89 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x90 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x91 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x92 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x93 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x94 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x95 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x96 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x97 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x98 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x99 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0xc0 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc1 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc2 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc3 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc4 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc5 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc6 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc7 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc8 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc9 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xca has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xcb has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xcc has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xcd has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xce has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xcf has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd0 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd1 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd2 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd3 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd4 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd5 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd6 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd7 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd8 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd9 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xda has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xdb has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xdc has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xdd has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xde has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xdf has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xe0 has    1 sectors [SCT Command/Status]
GP/S  Log at address 0xe1 has    1 sectors [SCT Data Transfer]

SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  2
SCT Version (vendor specific):       256 (0x0100)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    34 Celsius
Power Cycle Min/Max Temperature:     33/39 Celsius
Lifetime    Min/Max Temperature:     25/47 Celsius
Lifetime    Average Temperature:        80 Celsius
Under/Over Temperature Limit Count:   0/0
SCT Temperature History Version:     2
Temperature Sampling Period:         5 minutes
Temperature Logging Interval:        5 minutes
Min/Max recommended Temperature:     -5/80 Celsius
Min/Max Temperature Limit:           -10/85 Celsius
Temperature History Size (Index):    128 (39)

Index    Estimated Time   Temperature Celsius
  40    2013-08-09 03:30    34  ***************
  41    2013-08-09 03:35    36  *****************
  42    2013-08-09 03:40    35  ****************
  43    2013-08-09 03:45    35  ****************
  44    2013-08-09 03:50    32  *************
  45    2013-08-09 03:55    33  **************
 ...    ..(  3 skipped).    ..  **************
  49    2013-08-09 04:15    33  **************
  50    2013-08-09 04:20    32  *************
  51    2013-08-09 04:25    35  ****************
  52    2013-08-09 04:30    37  ******************
  53    2013-08-09 04:35    38  *******************
  54    2013-08-09 04:40    39  ********************
  55    2013-08-09 04:45    29  **********
  56    2013-08-09 04:50    34  ***************
  57    2013-08-09 04:55    47  ****************************
  58    2013-08-09 05:00    45  **************************
  59    2013-08-09 05:05    42  ***********************
  60    2013-08-09 05:10    30  ***********
  61    2013-08-09 05:15    31  ************
  62    2013-08-09 05:20    32  *************
  63    2013-08-09 05:25    32  *************
  64    2013-08-09 05:30    34  ***************
  65    2013-08-09 05:35    35  ****************
  66    2013-08-09 05:40    35  ****************
  67    2013-08-09 05:45    31  ************
  68    2013-08-09 05:50    32  *************
  69    2013-08-09 05:55    31  ************
  70    2013-08-09 06:00    33  **************
  71    2013-08-09 06:05    33  **************
  72    2013-08-09 06:10    33  **************
  73    2013-08-09 06:15    32  *************
  74    2013-08-09 06:20    33  **************
  75    2013-08-09 06:25    33  **************
  76    2013-08-09 06:30    34  ***************
 ...    ..(  2 skipped).    ..  ***************
  79    2013-08-09 06:45    34  ***************
  80    2013-08-09 06:50    33  **************
  81    2013-08-09 06:55    34  ***************
  82    2013-08-09 07:00    35  ****************
  83    2013-08-09 07:05    35  ****************
  84    2013-08-09 07:10    35  ****************
  85    2013-08-09 07:15    32  *************
  86    2013-08-09 07:20    34  ***************
 ...    ..(  6 skipped).    ..  ***************
  93    2013-08-09 07:55    34  ***************
  94    2013-08-09 08:00    38  *******************
 ...    ..(  2 skipped).    ..  *******************
  97    2013-08-09 08:15    38  *******************
  98    2013-08-09 08:20    39  ********************
  99    2013-08-09 08:25    40  *********************
 100    2013-08-09 08:30    40  *********************
 101    2013-08-09 08:35    39  ********************
 102    2013-08-09 08:40    33  **************
 103    2013-08-09 08:45    33  **************
 104    2013-08-09 08:50    34  ***************
 105    2013-08-09 08:55    35  ****************
 106    2013-08-09 09:00    36  *****************
 107    2013-08-09 09:05    33  **************
 108    2013-08-09 09:10    34  ***************
 109    2013-08-09 09:15    35  ****************
 ...    ..(  2 skipped).    ..  ****************
 112    2013-08-09 09:30    35  ****************
 113    2013-08-09 09:35    32  *************
 114    2013-08-09 09:40    34  ***************
 115    2013-08-09 09:45    36  *****************
 116    2013-08-09 09:50    37  ******************
 117    2013-08-09 09:55    38  *******************
 118    2013-08-09 10:00    39  ********************
 119    2013-08-09 10:05    40  *********************
 ...    ..(  2 skipped).    ..  *********************
 122    2013-08-09 10:20    40  *********************
 123    2013-08-09 10:25    39  ********************
 124    2013-08-09 10:30    40  *********************
 125    2013-08-09 10:35    40  *********************
 126    2013-08-09 10:40    40  *********************
 127    2013-08-09 10:45    41  **********************
 ...    ..(  2 skipped).    ..  **********************
   2    2013-08-09 11:00    41  **********************
   3    2013-08-09 11:05    37  ******************
   4    2013-08-09 11:10    37  ******************
   5    2013-08-09 11:15    38  *******************
   6    2013-08-09 11:20    38  *******************
   7    2013-08-09 11:25    39  ********************
   8    2013-08-09 11:30    40  *********************
   9    2013-08-09 11:35    40  *********************
  10    2013-08-09 11:40    39  ********************
  11    2013-08-09 11:45    40  *********************
  12    2013-08-09 11:50    41  **********************
 ...    ..(  4 skipped).    ..  **********************
  17    2013-08-09 12:15    41  **********************
  18    2013-08-09 12:20    42  ***********************
  19    2013-08-09 12:25    42  ***********************
  20    2013-08-09 12:30    42  ***********************
  21    2013-08-09 12:35    43  ************************
  22    2013-08-09 12:40    44  *************************
  23    2013-08-09 12:45    43  ************************
  24    2013-08-09 12:50    42  ***********************
  25    2013-08-09 12:55    41  **********************
 ...    ..(  2 skipped).    ..  **********************
  28    2013-08-09 13:10    41  **********************
  29    2013-08-09 13:15    39  ********************
  30    2013-08-09 13:20    38  *******************
 ...    ..(  3 skipped).    ..  *******************
  34    2013-08-09 13:40    38  *******************
  35    2013-08-09 13:45    37  ******************
 ...    ..(  2 skipped).    ..  ******************
  38    2013-08-09 14:00    37  ******************
  39    2013-08-09 14:05    33  **************

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x0002  4            0  R_ERR response for data FIS
0x0003  4            0  R_ERR response for device-to-host data FIS
0x0004  4            0  R_ERR response for host-to-device data FIS
0x0005  4            0  R_ERR response for non-data FIS
0x0006  4            0  R_ERR response for device-to-host non-data FIS
0x0007  4            0  R_ERR response for host-to-device non-data FIS
0x0008  4            0  Device-to-host non-data FIS retries
0x0009  4           31  Transition from drive PhyRdy to drive PhyNRdy
0x000a  4           16  Device-to-host register FISes sent due to a COMRESET
0x000b  4            0  CRC errors within host-to-device FIS
0x000d  4            0  Non-CRC errors within host-to-device FIS
0x000f  4            0  R_ERR response for host-to-device data FIS, CRC
0x0010  4            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  4            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  4            0  R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00  4            0  Vendor specific
0x8e01  4            0  Vendor specific
0x8e02  4            0  Vendor specific
0x8e03  4            0  Vendor specific
0x8e04  4            0  Vendor specific
0x8e05  4            0  Vendor specific
0x8e06  4            0  Vendor specific
0x8e07  4            0  Vendor specific
0x8e08  4            0  Vendor specific
0x8e09  4            0  Vendor specific
0x8e0a  4            0  Vendor specific
0x8e0b  4            0  Vendor specific
0x8e0c  4            0  Vendor specific
0x8e0d  4            0  Vendor specific
0x8e0e  4            0  Vendor specific
0x8e0f  4            0  Vendor specific
0x8e10  4            0  Vendor specific
0x8e11  4            0  Vendor specific

В таблице есть раздел Index Estimated Time Temperature Celsius, и там есть лог температур которые были у HDD явно до установки модуля smarttool - кто же тогда собирал этот лог?
3Q F375HW inext_hd1_222_r2, Digma HDMP-510 RTD1186 inext_hd_v2.14_moS_r0, iconBIT XDS1003D RTD1186 inext_hd_v2.14_moS_r0
fireicon
 
Posts: 36
Joined: 07 Nov 2012, 23:16

Re: smart (S.M.A.R.T.) информацию подключённых дисков.

Postby FarVoice » 10 Aug 2013, 08:52

инфа хранится в самом винте, а SMART tools только читает её.
ASUS O!Play R1 (amp_r12_vrtn), xTreamer Pro (amp_r12_vrt), xTreamer Prodigy (iNeXT 2.14 r2), IconBIT HDR12L (amp_r12_vrt), 3Q F425HW (xds42gl_7725_r3), MyGica A11 (mygica_m3_20121222)
User avatar
FarVoice
Администратор
 
Posts: 8572
Joined: 03 Sep 2010, 01:27
Location: Russia, Moscow


Return to Предложения и пожелания

Who is online

Users browsing this forum: No registered users and 15 guests

cron