moServices

by **123serge123** » 06 Sep 2011, 20:20

Юрий wrote:А Вы можете скомпилировать родной драйвер rtl8192cu из первого поста?
Может он бы заработал, я бы его и подсунул...

Мог бы - нопо э тому адресу не отдается - неверный пароль

.
А вывод команд dmesg и iwlist wlan0 scan сразу после попытки сконфигурить через ГУЙ

by **Юрий** » 06 Sep 2011, 20:34

123serge123 wrote:
Юрий wrote:А Вы можете скомпилировать родной драйвер rtl8192cu из первого поста?
Может он бы заработал, я бы его и подсунул...

Мог бы - нопо э тому адресу не отдается - неверный пароль .
А вывод команд dmesg и iwlist wlan0 scan сразу после попытки сконфигурить через ГУЙ

Архив драйвера подкрепил:

RTL8192CU_linux_v3.0.2164.20110715.zip: Драйвер с официального сайта; (6.44 MiB) Downloaded 269 times

Code: Select all: ~ # iwlist wlan0 scan wlan0 No scan results ~ # dmesg 4>msg->flags = 0001 msg->len = 1 msg->buf = 8165eaa0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8165eaa0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8165eaa0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8113efa0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb56e0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb56e0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb56e0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb56e0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb5800 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb5800 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb5800 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb5800 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb57e0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb5820 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb5820 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb5820 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb5820 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb5820 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb5820 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 816b2300 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 816b2300 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 816b2300 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 816b2300 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8135f3a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8135f3a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8135f3a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8113ed40 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8113ed40 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb54a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb54a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb5760 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb5760 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8135fe60 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8135fe60 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8135f5a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8135f5a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8113e440 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8113e440 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8113e440 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8113e440 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8113e440 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb54a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb54a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb54a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb54a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb54a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb54a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb54a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb54a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 819a5500 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb54a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb54a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb54a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb54a0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8135f460 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8135f460 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 819a5160 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 819a5160 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 80fb5780 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 819a5500 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 819a5500 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 819a5500 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 819a5500 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 816b25c0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 816b25c0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 816b25c0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8165e6e0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8165eaa0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8165eaa0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8165eaa0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 8165eaa0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 819a56c0 ----------------------------------------- ----------------------------------------- [I2C0] Xfer fail - TXABORT (1/2), Reason=0001 msg->addr = 3a msg->flags = 0001 msg->len = 1 msg->buf = 819a56c0 -----------------------------------------

by **123serge123** » 06 Sep 2011, 20:43

Юрий wrote:
123serge123 wrote:Архив драйвера подкрепил

Ок. Попробую.

by **123serge123** » 06 Sep 2011, 21:14

Пока пробуем непатченный. Для начала хотя бы сканировани эфира:)

by **Virtual** » 06 Sep 2011, 21:32

Юрий
поставьте модуль Hdcp Off (в мос)
ваш dmesg станет в разы полезней. (или подключите телик по HDMI)

by **Юрий** » 07 Sep 2011, 09:09

123serge123 wrote:Пока пробуем непатченный. Для начала хотя бы сканировани эфира:)

Спасибо, дома попробую. Вот только как лучше (чтобы не пересекались идентификаторы):
1. удалить с медиаплеера 8192du, а затем установить 8192cu;
2. перезаписать новый 8192cu поверх старого 8192du (с переименованием).
Вопрос может показаться глупым. Я не знаю, может у них где ещё лежат конфигурационные файлы... :?:

Virtual wrote:Юрий
поставьте модуль Hdcp Off (в мос)
ваш dmesg станет в разы полезней.***

Посмотрю, попробую. В 6-й бетта почти все сервисы были "неустановлены", вот и не догадался.

Virtual wrote:*** (или подключите телик по HDMI)

У меня нет HDMI. Вот такой у меня ЖКД телик

.

by **123serge123** » 07 Sep 2011, 10:56

Проще всего скопировать с переименование 8712du (не перенастраивать hotplug). Так как драйвер не патченный с верояностью 99% сканирование в ГУИ работать не будет, со 100% не будет определяться тип точек доступа (wep/wpa). Поэтому от Вас требуется после загрузки убедиться в работоспособности из командной строки.

Code: Select all: lsmod ifconfig wlan0 up iwlist wlan0 scan dmesg

Обратите внимание, что на сканирование эфира требуется некоторое время. Так что неплохо сканирование повторить несколько раз. Если заработает - будем патчить для ГУЯ.

by **Юрий** » 07 Sep 2011, 20:40

Так, сделано:
- сделал ifconfig wlan0 down;
- выдернул адаптор;
- подменил файл;
- на всякий случай перезагрузил Rebootом
- воткнул адаптор;
- получил надпись WiFi Plugin на телевизоре;

Code: Select all: ~ # lsmod 8192cu 631984 0 - Live 0xc02ac000 ohci_hcd 21904 0 - Live 0xc00d5000 ehci_hcd 40800 0 - Live 0xc00ca000 ufsd 624720 1 - Live 0xc014f000 venus_ir_new 12000 5 - Live 0xc008f000 sata_mars 22240 3 - Live 0xc005e000 libata 52720 1 sata_mars, Live 0xc0067000 ~ # ifconfig wlan0 up ~ # iwlist wlan0 scan wlan0 Scan completed : Cell 01 - Address: 74:EA:3A:A9:36:1A ESSID:"tkt773259" Protocol:IEEE 802.11bgn Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:150 Mb/s Extra:wpa_ie=dd160050f20101000050f20401000050f20401000050f202 IE: WPA Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra:rsn_ie=30140100000fac040100000fac040100000fac020000 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: DD0E0050F204104A0001101044000102 Quality=51/100 Signal level=51/100 Cell 02 - Address: 54:E6:FC:DB:CC:9C ESSID:"1Network" Protocol:IEEE 802.11bgn Mode:Master Frequency:2.432 GHz (Channel 5) Encryption key:on Bit Rates:300 Mb/s Extra:rsn_ie=30140100000fac040100000fac040100000fac020000 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Quality=56/100 Signal level=56/100 Cell 03 - Address: 00:19:CB:58:E5:79 ESSID:"AscWiFi" Protocol:IEEE 802.11bg Mode:Master Frequency:2.452 GHz (Channel 9) Encryption key:off Bit Rates:54 Mb/s Quality=100/100 Signal level=100/100 ~ # dmesg --- FREE index: 19712 order: 8 --- FREE index: 19584 order: 7 save exit: isCheckpointed 1 Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 Vendor: Generic- Model: Compact Flash Rev: 1.01 Type: Direct-Access ANSI SCSI revision: 00 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 1 Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 1, type 0 Vendor: Generic- Model: SM/xD-Picture Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 00 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Attached scsi removable disk sdd at scsi2, channel 0, id 0, lun 2 Attached scsi generic sg3 at scsi2, channel 0, id 0, lun 2, type 0 Vendor: Generic- Model: MS/MS-Pro Rev: 1.03 Type: Direct-Access ANSI SCSI revision: 00 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 Attached scsi removable disk sde at scsi2, channel 0, id 0, lun 3 Attached scsi generic sg4 at scsi2, channel 0, id 0, lun 3, type 0 usb-storage: device scan complete ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0 +++ ALLOC index: 19520 order: 4 1. start remap DVR zone 86c40000(805f0800) 16... map_done is 16... +++ ALLOC index: 19536 order: 4 1. start remap DVR zone 86c50000(805f0a00) 16... map_done is 16... --- FREE index: 19536 order: 4 save exit: isCheckpointed 1 save exit: isCheckpointed 1 save exit: isCheckpointed 1 ###=> usb_read_port_complete => urb status(-71) ###=> usb_read_port_complete => urb status(-71) ###=> usb_read_port_complete => urb status(-71) ###=> usb_read_port_complete => urb status(-71) ###=> usb_read_port_complete => urb status(-71) continual_urb_error > 4 ###=> usb_read_port_complete => urb status(-71) continual_urb_error > 4 ###=> usb_read_port_complete => urb status(-71) continual_urb_error > 4 ###=> usb_read_port_complete => urb status(-71) continual_urb_error > 4 usb 1-1.2: USB disconnect, address 3 +rtw_dev_remove (2)871x_drv - drv_close, bup=1, hw_init_completed=1 -871x_drv - drv_close, bup=1 ###> rtw_cmd_thread break................. ===> rtw_dev_unload usb_read_port_cancel usb_write_port_cancel <=== rtw_dev_unload +r871xu_dev_remove, hw_init_completed=1 --- FREE index: 19464 order: 3 --- FREE index: 19488 order: 3 --- FREE index: 19496 order: 3 --- FREE index: 19504 order: 3 free_recv_skb_queue not empty, 4 =====> rtl8192c_free_hal_data ===== <===== rtl8192c_free_hal_data ===== -r871xu_dev_remove, done --- FREE index: 19520 order: 4 +++ ALLOC index: 19712 order: 8 1. start remap DVR zone 86d00000(805f2000) 256... map_done is 128... +++ ALLOC index: 19584 order: 7 1. start remap DVR zone 86c80000(805f1000) 128... map_done is 127... +++ ALLOC index: 19488 order: 4 1. start remap DVR zone 86c20000(805f0400) 16... map_done is 9... --- FREE index: 19488 order: 4 --- FREE index: 19712 order: 8 --- FREE index: 19584 order: 7 usb 1-1.2: new high speed USB device using ehci_hcd and address 5 CHIP TYPE: RTL8188C_8192C usb_endpoint_descriptor(0): bLength=7 bDescriptorType=5 bEndpointAddress=81 wMaxPacketSize=200 bInterval=0 RT_usb_endpoint_is_bulk_in = 1 usb_endpoint_descriptor(1): bLength=7 bDescriptorType=5 bEndpointAddress=2 wMaxPacketSize=200 bInterval=0 RT_usb_endpoint_is_bulk_out = 2 usb_endpoint_descriptor(2): bLength=7 bDescriptorType=5 bEndpointAddress=3 wMaxPacketSize=200 bInterval=0 RT_usb_endpoint_is_bulk_out = 3 usb_endpoint_descriptor(3): bLength=7 bDescriptorType=5 bEndpointAddress=84 wMaxPacketSize=40 bInterval=1 RT_usb_endpoint_is_int_in = 4, Interval = 1 nr_endpoint=4, in_num=2, out_num=2 USB_SPEED_HIGH Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C. RF_Type is 3!! EEPROM type is E-FUSE ====> ReadAdapterInfo8192C Boot from EFUSE, Autoload OK ! #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 #######[cfyeh-debug] store_check_change_field(504) usb_plug_status 1 +++ ALLOC index: 19712 order: 8 1. start remap DVR zone 86d00000(805f2000) 256... map_done is 0... +++ ALLOC index: 19584 order: 7 1. start remap DVR zone 86c80000(805f1000) 128... map_done is 0... +++ ALLOC index: 19520 order: 6 1. start remap DVR zone 86c40000(805f0800) 64... map_done is 61... +++ ALLOC index: 19488 order: 4 1. start remap DVR zone 86c20000(805f0400) 16... map_done is 0... --- FREE index: 19520 order: 6 --- FREE index: 19488 order: 4 EEPROMVID = 0x0bda EEPROMPID = 0x8176 EEPROMCustomerID : 0x00 EEPROMSubCustomerID: 0x00 RT_CustomerID: 0x00 _ReadMACAddress MAC Address from EFUSE = 00:e0:4c:04:01:f5 EEPROMRegulatory = 0x0 _ReadBoardType(0) BT Coexistance = disable RT_ChannelPlan: 0x02 _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0) ### PS params=> power_mgnt(0),usbss_enable(0) ### ### AntDivCfg(0) readAdapterInfo_8192CU(): REPLACEMENT = 1 <==== ReadAdapterInfo8192C in 430 ms +++ ALLOC index: 19464 order: 3 1. start remap DVR zone 86c08000(805f0100) 8... map_done is 8... +++ ALLOC index: 19488 order: 3 1. start remap DVR zone 86c20000(805f0400) 8... map_done is 0... +++ ALLOC index: 19496 order: 3 1. start remap DVR zone 86c28000(805f0500) 8... map_done is 0... +++ ALLOC index: 19504 order: 3 1. start remap DVR zone 86c30000(805f0600) 8... map_done is 6... rtw_macaddr_cfg MAC Address = 00:e0:4c:04:01:f5 MAC Address from pnetdev->dev_addr= 00:e0:4c:04:01:f5 bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0 +++ ALLOC index: 19520 order: 6 1. start remap DVR zone 86c40000(805f0800) 64... map_done is 0... +++ ALLOC index: 6656 order: 4 1. start remap DVR zone 83a00000(8058c000) 16... map_done is 16... --- FREE index: 19520 order: 6 --- FREE index: 6656 order: 4 +++ ALLOC index: 19520 order: 4 1. start remap DVR zone 86c40000(805f0800) 16... map_done is 0... +++ ALLOC index: 19512 order: 3 1. start remap DVR zone 86c38000(805f0700) 8... map_done is 8... --- FREE index: 19520 order: 4 --- FREE index: 19512 order: 3 +871x_drv - drv_open, bup=0 ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC fw_ver=v75, fw_subver=0, sig=0x88c0 fw download ok! Set RF Chip ID to RF_6052 and RF type to 1T1R. GPIO_IN=08 eRfPowerStateToSet=0 IQK:Start!!! Path A IQK Success!! Path A IQK Success!! IQK: final_candidate is 0 IQK: RegE94=101 RegE9C=10 RegEA4=fc RegEAC=3fe RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0 Path A IQ Calibration Success ! pdmpriv->TxPowerTrackControl = 1 MAC Address from REG_MACID = 00:e0:4c:04:01:f5 MAC Address = 00:e0:4c:04:01:f5 -871x_drv - drv_open, bup=1 --- FREE index: 19712 order: 8 --- FREE index: 19584 order: 7 save exit: isCheckpointed 1 save exit: isCheckpointed 1 save exit: isCheckpointed 1 survey done event(1a) save exit: isCheckpointed 1 +++ ALLOC index: 19520 order: 4 1. start remap DVR zone 86c40000(805f0800) 16... map_done is 8... +++ ALLOC index: 19536 order: 4 1. start remap DVR zone 86c50000(805f0a00) 16... map_done is 16... --- FREE index: 19536 order: 4

Я не стал выполнять команду сканирования несколько раз, потому что результат был уже после первого раза и был ошеломляющим, для меня.
P.S. Спасибо

by **Юрий** » 07 Sep 2011, 20:53

Команда сканирования дала хороший уровень сигналов для точек, а вот через интерфейс:

by **123serge123** » 07 Sep 2011, 21:13

Вы меня несколько озадачили - я был уверен, что типы точек доступа будут в ГУИ определяться одинаково и неправильно (кстати они определились правильно?). Тогда давайте добавлю патчик для правильного определения типа ТД и уровня сигнала. И еще одну попытку перед окончательным причесыванием драйвера.

moServices

Добавление драйвера WiFi RTL8192CU

Re: Добавление драйвера WiFi RTL8192CU

Re: Добавление драйвера WiFi RTL8192CU

Re: Добавление драйвера WiFi RTL8192CU

Re: Добавление драйвера WiFi RTL8192CU

Re: Добавление драйвера WiFi RTL8192CU

Re: Добавление драйвера WiFi RTL8192CU

Re: Добавление драйвера WiFi RTL8192CU

Re: Добавление драйвера WiFi RTL8192CU

Re: Добавление драйвера WiFi RTL8192CU

Re: Добавление драйвера WiFi RTL8192CU

Who is online