Восстановление при самой неудачной прошивке Saturn(1186)

о железе плеера и о периферии

NUPGRADE на IconBIT Movie3D Deluxe

Postby elamigo163 » 09 Sep 2015, 09:00

Уважаемые форумчане, прошу у вас помощи.
Вчера столкнулся с проблемой при включении медиаплеера IconBIT Movie3D Deluxe.
На своем экране он сразу после включения пишет NUPGRADE. Перезапуск не помогал. Попробовал перепрошить родными прошивками xfw_MOVIE3D_DELUXE_v10.1.1.r11337_(26.03.2014)_2.02_ browser_off_RU.zip и xfw_XDS73D_XDS1003D_Movie3D_v10.1.1.r10521_(26.09.13)_2.02_RU.zip.
Обновлял прошивку через флешку. По результату - после перезапуска опять уходит на экран NUPGRADE.

Попробовал поставить другую прошивку - inext_hd1_216_r0.
Результат - после перезапуска выдает на своем дисплее надпись LOADING, а на телевизоре - INeXt Loading USB update...

Что с ним могло случиться? Как его реанимировать?
Заранее очень благодарен за помощь.

P.S. гарантия на него кончилась 1,5 месяца назад как назло...

После совета на 4pda:
Сменил флешку, перепрошивка не помогла, закинул на флешку бут http://files.iconbit.ru/MEDIAPLAYER/XDS ... s1003d.zip и поставил его, потом попробовал еще поставить xfw_MOVIE3D_v10.1.1.r11131_(24.12.2013)_2.02_ browser_off_RU, но он так и перезапускает циклически установку после ее завершения успешного. Теперь после включения на его дисплее надпись NUPGRADE а на телевизоре изображение флешки со стрелкой.
elamigo163
 
Posts: 1
Joined: 09 Sep 2015, 08:49

Re: NUPGRADE на IconBIT Movie3D Deluxe

Postby Virtual » 09 Sep 2015, 11:59

вот и выполняй совет с 4pda
PS нужен лог с консольного кабеля. для анализа.... да и впоследствии кабель может понадобится для восстановления

PSPS те-ж четко дали тему! не стоит создавать свое.
марсы: HDS7 (смотрелка AMP скин vrt )
HDR12 AMP (обычно сервер с RAM 256 и 2 SATA диска 2T+)//но очень иногда оцифровка видео
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.90 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6862
Joined: 01 Oct 2010, 17:17
Location: RU

Re: восстановление при самой неудачной прошивке saturn(1186)

Postby lesorub » 28 Sep 2015, 20:58

iconbit XDS73D
На экране повисло слово iconbit и не загружается. Прошить по новой не получается, не переходит в режим прошивки. Есть ли идеи?
Iconbit xds73d(inext_hd1_2.20_r1)
lesorub
 
Posts: 18
Joined: 22 Dec 2012, 16:27

Re: восстановление при самой неудачной прошивке saturn(1186)

Postby lymax » 28 Sep 2015, 21:31

лог нужен бы...
для начала можно попробовать чистый бут прошить
http://files.iconbit.ru/MEDIAPLAYER/XDS ... xds73d.zip
Марсы: 2*Emtec Movie Cube S800H (amp_r12 vrtn + amp_r12 noGUI[NFS/Samba/FTP/Trans])
Сатурны: Iconbit XDS73D + eGreat R6S Pro (ампс + скин 3Dgui)
+ eGreat R6S Pro (ампс ногуй) + 2*eGreat R6S для тестов
Сеть/Инет: LAN / WLAN 300Mb / ADSL 16Mb
User avatar
lymax
 
Posts: 245
Joined: 12 Jun 2012, 00:10

Re: восстановление при самой неудачной прошивке saturn(1186)

Postby lesorub » 28 Sep 2015, 21:52

А как прошить если он не переходит в режим прошивки?
С логом тоже поясните. Он же, после появления iconbit, виснет.
Iconbit xds73d(inext_hd1_2.20_r1)
lesorub
 
Posts: 18
Joined: 22 Dec 2012, 16:27

Re: восстановление при самой неудачной прошивке saturn(1186)

Postby lesorub » 28 Sep 2015, 22:20

Спасибо. Получилось. Прошил бут, затем прошивку от 03.2013
Iconbit xds73d(inext_hd1_2.20_r1)
lesorub
 
Posts: 18
Joined: 22 Dec 2012, 16:27

Снова Eva Vision Mini

Postby alnor » 07 Nov 2015, 00:41

Добрый день.

Неудачно обновил свой Eva Vision прошивкой от MeLe. В результате получил зеленый экран через HDMI и потерял возможность перепрошивки с флэшки. Судя по логам с COM порта, плеер находится в состоянии постоянной перезагрузки. Ниже лог одного цикла.
Заранее благодарен за помощь!

| +
?hello.world
efghhhhhhhhhhhhhhhhhhhihhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhjk
Jump!
Orginal init value: 020E5DB1
cde
profile->manufacturer_id (first 4B):9A94D7AD
profile->data_per_page:2000
profile->page_per_block:100

blk 79 starts from page 700
klmnopqrstu5280 wait5280 wait4K&load bbt...load env to (addr 0xa0010000, size 64KB)...
page_start=0xf00 page_end=0x1900
EPHY: 8211E
[HDMI]: Set I2C Speed = 50 kHz
[HDMI]: Chk_HotPlug() TV is connected.
[HDMI]: Tx Reads EDID from Rx. block=0
[HDMI]: EDID chksum valid!!! chksum=9472
HDMI DEVICE
PAL logo
[VFD] init

REALTEK ROM Monitor, Revision KIIE.0402.1057.
Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved.

For a list of available commands, type 'help'.

Compilation time /version= Dec 28 2011 10:19:41 /KIIE.0402.1057
MAC address = 00.11.22.33.46.24
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00
Processor ID/revision = 0x93 / 0x85
Endianness = Little
Flash memory size = 4 GByte
SDRAM size = 512 MByte
First free SDRAM address = 0x800b1000

Press 'ESC' to Monitor mode
____________________[VFDSTR] LOADING
Set ethernet register: 00000044
??Linux Kernel:
FW Image from 0xa2200000, to 0x80100000, size=0x59bdac
Audio FW:
FW Image from 0xa2800000, to 0x81b00000, size=0x20a308
Video FW:
FW Image from 0xa2c00000, to 0x81d80000, size=0x242810
Audio data:
FW Image from 0xa3000000, to 0x83600000, size=0x68c78
Video data:
FW Image from 0xa3200000, to 0x83700000, size=0x5c0c2
REG32(Audio_Mute_GPIO)=0xa
5280Go 5280Go
DDMI Raw Enable: MPG AC3 DTSF ATMAPLEG 2E RRAOARC
PDVPid WeoM A5P1RO8 5M8L4
P E

PS P D I =F R0aw xE8n1ad9b0l9eb: 4M
DGRA DADCR3 DT =S MP0ExG8S21C dPA9UA0_C7C 1LcD
00C WAKMU9AS0PEKR =O 0 =.M L P0 x
0301
0 F0so0er1cc0.e
2E
CchA USFEo rm=a t :0x D00T0S0 0D0TS0H0D
A 0Cx39 0D0D0P0 0M0L8P: A0ACx 0W0M0A00P0R0O0
0
bxfSftfarft0 1fPfo w0erx 8O1nfb 4M1us0i8c 0xF8l1ofw
4108[
xUD I0Ox 9W00A0R0NI0N18G:] 0
0 0[0A]0 0m00a0l l0ocx 8 10fbx401004240 00x0000,0 b0u0t00 0i t0'lxl0 0m00a0l0lo c1
8 0 0x0x09004000000020
o: 0xb000ff01 0x00ff0000p o0wxe0r00 0ofn fmfufs 0ixcb 8cr0e1aa4t8e4 a
0 o0kx9
0f0in0i0s3h8: p0owxe8r1 d8o8n7 dmu0s i0xc8 1cdre8a8t7ed4
e[0xA0UD0I0O00 0W0A4RN IN0Gx]0 00[_1A0O0_00g
0t _f0ixr90s0t0_0va0l4i8d: _0cxhI9D0X0 00i5n9v8al i0dx0]0
0r0[A0O0]2 [0rxa9w 0cgoon f0ixg8:0H1D0M0I0(000) ,mStPdDpIarFt(00s)=]
W [0A5O9t]SckP_DI nF anSdEL0:E3CTx8I6ON88:6 P17C2Mk ,F8I8F0O[fA9UcD9I1O8
A R0NxI9N0G0]0 0[0_5A8O:_ g0ext8_1ffi8r0s0t0_0v a0lxi0d0_0c0h0I0D0X0 i0nxv0a0l0i0d0]0
06 4k0W(a/i)t, 2V4i5d7e6ok (S/euts rT/Vl oScyaslt/eemt c-)-,-2 1B2e9g9i2nk
Wrxo 0B0O0N0D0I0N0G0
0o R0oxtN9fI0sN0tG0y!0p!0e!6= 8sN:qO u 0aIxsN0hI0fT0s!0 !0r!0o
!00N te0=wx3 01F0:o00r01m0 a0
i !d e f0exr0 0602050p0 0l0o,g oM,P EsGt
el [lD0E Cb]ldaeclka
1txR ber0sp0e 0ti0 s1E 0tO4hF eF0r!xn 8e
w3 M[AcaO]7c[.r
fcof
Hig0:
1D M0Ix(900)0,0S0P0D7I8F:( 00)x]8
[f
CbA7dfO9d]7rS0e sPD0sIx F8=1 Sf0EbxL48Ef0C21T00I 0O00Nx0:80 1
M 4FfI2F0O 0x81ec95a4
L 0inuxax v1ders90ion9a 2.0:6.3 04-Vx3ENUc0S (48roo1ftb@R 0TDMx0PSAc7-02b3) (0agse1 ve0xrsi24on 844.369.6 44201 0102x018 87(pr64ere1dlea7
) 0(GCxaC) 1d) #901 P9bREE0:MPT 0 Thx3u Nc0ov 3a22 0107:0 48:0x38 8eCST05 200002

0Reax3ltec0k L48INU1fX sb tar0xted02...00
V30enu21s s
UnROtinS g:
RexOSspe hactve ed419 i430nt4 berytreups Rt AM.er
Sroystr em orCPU e haxcs 1ep UAtiRT.on
te !!Sys
m CPU uses internal timer interrupt.
Bootloader version: KIIE.0402.1057. This version string is of new format.
The information of this board: Company ID:0x0 CPU ID: 0x4 Board ID: 0x402
Ethernet Mac address: 00.11.22.33.46.24
Model Config length=3
Base year of RTC is 2010.
audio addr: 1b00000
Config serial console: console=ttyS0,115200n8r
bootconsole [early0] enabled
CPU revision is: 00019385 (MIPS 24Kc)
FPU revision is: 01739300
Determined physical RAM map:
memory: 00100000 @ 00000000 (reserved)
memory: 01a00000 @ 00100000 (usable)
memory: 00500000 @ 01b00000 (reserved)
memory: 0e000000 @ 02000000 (usable)
memory: 00100000 @ 10000000 (reserved)
memory: 07f00000 @ 10100000 (usable)
memory: 00100000 @ 18000000 (reserved)
memory: 05b00000 @ 18100000 (usable)
Wasting 8192 bytes for tracking 256 unused pages
Zone PFN ranges:
DMA 0x00000000 -> 0x00002000
Normal 0x00002000 -> 0x0001dc00
Movable zone start PFN for each node
Node 0: 23552
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x0001dc00
zone DMA size: 2000 realsize: 2000
zone Normal size: 3c00 realsize: 3c00
zone Movable size: 18000 realsize: 18000
zonelist: Movable Normal DMA
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 121856
Kernel command line: mtdparts=rtk_nand:3868672k,88064k(/),24576k(/usr/local/etc),212992k rootfstype=squashfs root=31:01 console=ttyS0,115200n8r ip=192.168.0.9::192.168.0.254:255.0.0.0:::
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, PIPT, no aliases, linesize 32 bytes
Writing ErrCtl register=0001ca01
Readback ErrCtl register=0001ca01
Memory: 468732k/479232k available (4386k kernel code, 10500k reserved, 1170k data, 184k init, 0k highmem)
Disable zone Movable
hole addr: 65536 size: 256
hole addr: 98304 size: 256
*****reserve DVR zone...
NR_IRQS:8
Estimated CPU frequency: 796.54 MHz
Console: colour dummy device 80x25
Calibrating delay loop... 530.84 BogoMIPS (lpj=2654208)
Mount-cache hash table entries: 512
devtmpfs: initialized
NET: Registered protocol family 16
prom_flashsize = 0x100000000
Flash size is 0x2000000
registering PCI controller with io_map_base unset
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.22.1.
[PCI] CFG WARNING,Read config data ((null)) failed - timeout
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource MIPS-DMP
NET: Registered protocol family 2
Switched to NOHz mode on CPU #0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.




***************** se init module *********************



se init module major number = 253
size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52...
[user land] CmdBuf virt addr = 9d904000/bd904000, phy addr=1d904000
[MCP] Info, mcp device detected ...
init_vdso successfull
rtktlb: Hello, Realtek TLB Mapper...
AllocBP size: 1277952 order: 9 offset: 8192
<<<DVR FREE AREA>>>
0: 0
1: 0
2: 0
3: 0
4: 0
5: 0
6: 0
7: 0
8: 2
Addr: 90100000, order: 8
Addr: 98100000, order: 8
9: 2
Addr: 90200000, order: 9
Addr: 98200000, order: 9
10: 2
Addr: 90400000, order: 10
Addr: 98400000, order: 10
11: 2
Addr: 90800000, order: 11
Addr: 98800000, order: 11
12: 2
Addr: 91000000, order: 12
Addr: 99000000, order: 12
13: 2
Addr: 82000000, order: 13
Addr: 92000000, order: 13
14: 4
Addr: 84000000, order: 14
Addr: 88000000, order: 14
Addr: 8c000000, order: 14
Addr: 94000000, order: 14
squashfs: version 4.0 (2009/01/31) Phillip Lougher
<mtp module> insert mtpfs module OK
NTFS driver 2.1.29 [Flags: R/O].
YAFFS Driver Rev:329787 (2010-10-05)
YAFFS Driver is successfully installing.
msgmni has been set to 915
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
Realtek NAND Flash Driver Rev:337905 (2010-10-18)
(X)Enable interrupt mechanism of NAND driver.
Get parameter from register...
[rtk_nand_init]Bootcode size 0x3200000
[rtk_nand_init]Factory parameter size 0x400000
[rtk_nand_init]Disable NFCP...
nand_base_rtk version:0824-2011
(X)NAND_POWEROFF_CARDREADER_WITH_MULTI_READ
(X)NAND_READ_SKIP_UPDATE_BBT
READ ID:0xad 0xd7 0x94 0x9a 0x74 0x42
One H27UBG8T2A chip has 1 die(s) on board
nand part=H27UBG8T2A, id=add7949a, device_size=4294967296, chip_size=4294967296, num_chips=1, page_size=8192, isLastPage=1, eccBits=24
[rtk_nand_scan_bbt] have created bbt B1, just loads it !!
[dump_BBT] Nand BBT Content
Congratulation!! No BBs in this Nand.
4 cmdlinepart partitions found on MTD device rtk_nand
RTK: using dynamic nand partition
Creating 4 MTD partitions on "rtk_nand":
0x000000000000-0x0000ec200000 : "Partition_000"
0x0000ec200000-0x0000f1800000 : "/"
0x0000f1800000-0x0000f3000000 : "/usr/local/etc"
0x0000f3000000-0x000100000000 : "Partition_003"
0x000000000000-0x000100000000 : "disc"
[rtk_nand_init]Ecc bit select 24
Realtek Nand Flash Driver is successfully installing.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
8139cplus: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
this Jupiter eth RX_OFFSET = 0x0
MAC address = 0x00.11.22.33.46.24
eth0: RTL-8139C+ at 0xb8016000, 00:11:22:33:46:24, IRQ 2
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
Initializing USB MTP/PTP driver...
usbcore: registered new interface driver usb-mtp
USB MTP/PTP support registered.
mice: PS/2 mouse device common for all mice
rtc-rtk_dmp_venus rtc-rtk_dmp_venus.0: rtc core: registered rtc-rtk_dmp_venus as rtc0
rtc: Real Time Clock of Realtek DMP's Venus series CPUs
i2c /dev entries driver
[I2C0] i2c speed changed to 100 KHz
I2C0 Bus Status Check.... OK
=========================
= VER : 2.1b
=========================
= PHY : 0
= MODEL: Saturn
= SPD : 100
= SAR : 0x024 (7 bits)
= TX FIFO DEPTH : 32
= RX FIFO DEPTH : 32
= FIFO THRESHOLD: 4
= BUS JAM RECORVER 3: ON
= NON STOP WRITE : ON
= GPIO RW SUPPORT : ON
=========================
[I2C1] i2c speed changed to 100 KHz
I2C1 Bus Status Check.... OK
=========================
= VER : 2.1b
=========================
= PHY : 1
= MODEL: Saturn
= SPD : 100
= SAR : 0x024 (7 bits)
= TX FIFO DEPTH : 32
= RX FIFO DEPTH : 32
= FIFO THRESHOLD: 4
= BUS JAM RECORVER 3: ON
= NON STOP WRITE : ON
= GPIO RW SUPPORT : ON
=========================
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.1.0)
cec_core_init, register cec_bus 806640b0
saturn cec module init
register cec driver 'mars_cec' (80664170)
register cec device 'mars_cec' (806641e0) to cec0
probe : cec_dev 'mars_cec' (806641e0), cec_drv 'mars_cec' (80664170)
Open Mars CEC
cp_hotplug
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
#0: Mars 1
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
<<<<< Enable memory protector >>>>>
rtk_enable_kcpu : Code Size = 6888 , Data Size = 2456
Saturn_Param_PWM_Irda_Key.protocol = 0
Saturn_Param_PWM_Irda_Key.power_key = 0xfd02ff00
Saturn_Param_PWM_Irda_Key.eject_key = 0xe817fc03
Saturn_Param_PWM_GPIO_Key.power_key_number = -1
Saturn_Param_PWM_GPIO_Key.eject_key_number = -1
_slKoeptext = 0x80546e98 , _esleeptext = 0x80548980
_sleepdata = 0x8066caa0 , _esleepdata = 0x8066d438
Realtek Saturn Power Management, (c) 2011 Realtek Semiconductor Corp.
avcpu: audio & video cpu driver for Realtek Media Processors
cp_open
init_hw

eth0: Set multicast.
jupiter/saturn 1g
init_hw finished

eth0: Set multicast.

eth0: Set multicast.

eth0: Set multicast.
ADDRCONF(NETDEV_UP): eth0: link is not ready
IP-Config: Complete:
device=eth0, addr=192.168.0.9, mask=255.0.0.0, gw=192.168.0.254,
host=192.168.0.9, domain=, nis-domain=(none),
bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
VFS: Mounted root (squashfs filesystem) readonly on device 31:1.
devtmpfs: mounted
Freeing unused kernel memory: 184k freed
Welcome to Realtek Linux

Please press Enter to activate this console. mount: mounting devpts on /dev/pts failed: No such file or directory
Venus rtc cannot work.
yaffs: dev is 32505858 name is "mtdblock2" rw
yaffs: passed flags ""
mkdir: can't create directory '/var/run': File exists
Starting INET services....
rtksdio: 0xb800036c = 0x555d4844
Realtek Card-Reader Driver Rev:SATURN (2012-02-08 13:50)
rtksdio: power_gpio = 0xb801b110
rtksdio: power_bits = 31
rtksdio: clk change to 15MHz
mmc0: rtksdio driver initialized,
Realtek Card-Reader Controller Driver is successfully installing.

Realtek Bulid-In SATA Driver Rev:SATURN (2012-06-27 14:20)
sata_rtk sata_rtk: version 0.01
sata_rtk sata_rtk: slots 32 ports 1
scsi0 : sata_rtk
ata1: SATA max UDMA/133 irq 4
BGA Package2010-01-01 00:00:06: (log.c.166) server started

pvrsrvkm: module license 'Proprietary. Send bug reports to ip-support@powervr.com' taints kernel.
Disabling lock debugging due to kernel taint
ata1: SATA link down (SStatus 0 SControl 300)
continus.
dcMal 9c000000 vir2Phy:1c000000 3686400
system buffer:9c000000,0,1c000000
continus.
dcMal 9c400000 vir2Phy:1c400000 3686400
system buffer:9c400000,0,1c400000
continus.
dcMal 9c800000 vir2Phy:1c800000 3686400
system buffer:9c800000,0,1c800000
/etc/init.d/rc.pvr: line 175: /usr/local/bin/pvrsrvinit: Permission denied
pvr init fail
LOAD_RETYR.................
rmmod: remove 'pvrsrvkm': Resource temporarily unavailable
free psDevInfo->psSystemBuffer@(null)
free psDevInfo->psSystemBuffer@(null)
Unloaded PowerVR consumer services.
continus.
dcMal 9c800000 vir2Phy:1c800000 3686400
system buffer:9c800000,0,1c800000
continus.
dcMal 9c400000 vir2Phy:1c400000 3686400
system buffer:9c400000,0,1c400000
continus.
dcMal 9c000000 vir2Phy:1c000000 3686400
system buffer:9c000000,0,1c000000
/etc/init.d/rc.pvr: line 175: /usr/local/bin/pvrsrvinit: Permission denied
pvr init fail
LOAD_RETYR................. 1
rmmod: remove 'pvrsrvkm': Resource temporarily unavailable
free psDevInfo->psSystemBuffer@(null)
free psDevInfo->psSystemBuffer@(null)
Unloaded PowerVR consumer services.
continus.
dcMal 9c000000 vir2Phy:1c000000 3686400
system buffer:9c000000,0,1c000000
continus.
dcMal 9c400000 vir2Phy:1c400000 3686400
system buffer:9c400000,0,1c400000
continus.
dcMal 9c800000 vir2Phy:1c800000 3686400
system buffer:9c800000,0,1c800000
/etc/init.d/rc.pvr: line 175: /usr/local/bin/pvrsrvinit: Permission denied
pvr init fail
LOAD_RETYR................. 2
rmmod: remove 'pvrsrvkm': Resource temporarily unavailable
free psDevInfo->psSystemBuffer@(null)
free psDevInfo->psSystemBuffer@(null)
Unloaded PowerVR consumer services.
continus.
dcMal 9c800000 vir2Phy:1c800000 3686400
system buffer:9c800000,0,1c800000
continus.
dcMal 9c400000 vir2Phy:1c400000 3686400
system buffer:9c400000,0,1c400000
continus.
dcMal 9c000000 vir2Phy:1c000000 3686400
system buffer:9c000000,0,1c000000
/etc/init.d/rc.pvr: line 175: /usr/local/bin/pvrsrvinit: Permission denied
pvr init fail
LOAD_RETYR................. 3
rmmod: remove 'pvrsrvkm': Resource temporarily unavailable
free psDevInfo->psSystemBuffer@(null)
free psDevInfo->psSystemBuffer@(null)
Unloaded PowerVR consumer services.
continus.
dcMal 9c000000 vir2Phy:1c000000 3686400
system buffer:9c000000,0,1c000000
continus.
dcMal 9c400000 vir2Phy:1c400000 3686400
system buffer:9c400000,0,1c400000
continus.
dcMal 9c800000 vir2Phy:1c800000 3686400
system buffer:9c800000,0,1c800000
/etc/init.d/rc.pvr: line 175: /usr/local/bin/pvrsrvinit: Permission denied
pvr init fail
LOAD_RETYR................. 4
rmmod: remove 'pvrsrvkm': Resource temporarily unavailable
free psDevInfo->psSystemBuffer@(null)
free psDevInfo->psSystemBuffer@(null)
Unloaded PowerVR consumer services.
more than retry time
Running dvdplayer with RootApp
RootApp AVHDD version...
ente*** 476MB version...
r 2nd case...
pli initialization...
auth: memory address 0x40000000...
==clear pli setting....
======== reg_cold_rst(0x2) =============
================================================
================================================
root execute DvdPlayer...
================================================
================================================
[=EMS=][0x400]---CFTOObjMgr::[0x1aedfaa0]
WatchDog does not receive signal for 2 seconds, value: 0
IN : /tmp/ramfs/smb
downloader 0 starts, 0x28b8810
downloader 1 starts, 0x28b8920
finish default module register
finish rtse module register
finish devmem module register
finish rtk_keyboard module register
finish keyboard module register
finish ps2mouse module register
(t=1024) +DfbProcessAP::DfbProcessAP(const char*, const char*):
(t=1024) +DfbProcessAP::DfbProcessAP(const char*, const char*):
[Dlna DMR] this is GDlnaMediaRendererAP
CMD: mkdir -p /tmp/netb/smb
In my system...
CMD: mkdir -p /tmp/smb
In my system...
CMD: ifconfig > /tmp/netb/samba_my_ip
In my system...
Warning!! the Mask is 255.0.0.0.






WARNING WARNING WARNING m_db_manage_flag_cnt = -1





DB FILENAME = /tmp/ramfs/Setup
[DataObject.cpp 464]DB Develop Version same . Don't be upgrade.
[DataObject.cpp 503]DB Version same . Don't be upgrade.



m_BookMark_Size=4096 m_Signature_Size=16


GrandMa Revision: 457247
Power Starting ..
!!!BootUP!!!
Bootup t1 = 1262304017.384 sec
In my system...
*****check animation logo...
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
Killing DvdPlayer*******************
killall: wpa_supplicant: no process killed
killall: hostapd: no process killed
killall: udhcpd: no process killed
killall: udhcpc: *** 476MB version...
no process killed
pli initialization...
auth: memory address 0x40000000...
[RPC]: AVCPU_RESET_PREPARE...
### reset audio & video - saturn version ###
5280 wait5280 wait

avcpu: >>>>>> Got NAND Flash device!

avcpu: flash_type: 4
avcpu: boot_code_size: 3600000
avcpu: fast_nand_read_oob from: 3600000, len: 2000 buf: 9d394000
avcpu: fw_desc_table_v1->signature = VERONA__
avcpu: fw_desc_table_v1->version = 0x1
avcpu: fw_desc_table_v1->part_list_len = 0xc0
avcpu: fw_desc_table_v1->fw_list_len = 0x100
avcpu: fw_desc_table_v1 = 0x9d394000
avcpu: part_entry = 0x9d394020
avcpu: part_count = 0x4
avcpu: fw_entry = 0x9d3940e0
avcpu: FW type, 0x2
avcpu: Audio FW found: 9d394100
avcpu: Video FW found: 9d394120
avcpu: FW type, 0xa
avcpu: FW type, 0xb
avcpu: audio_fw_entry->offset = 0x3e00000
avcpu: audio_fw_entry->length = 0x20a308
avcpu: audio_fw_entry->target_addr = 0x81b00000
avcpu: fast_nand_read_oob from: 3e00000, len: 20c000 buf: 81b00000
ret: 20c000 length: 20a308
audio entry value: 0000b081
avcpu: video_fw_entry->offset = 0x4200000
avcpu: video_fw_entry->length = 0x242810
avcpu: video_fw_entry->target_addr = 0x81d80000
avcpu: fast_nand_read_oob from: 4200000, len: 244000 buf: 81d80000
ret: 244000 length: 242810
video entry value: 0000d881
:280Go 5280Go [RPC]
_GD MAIV RaCwP UE_nablRe: EMPFSGA TAACL3 EEDTRSR OMTRPE
M5AP8DAiOAdNCeE o.D .D5P 1.W8
R4O
MELPP C

SP D=I F 0Rxaw8 1Edn9a0b9lbe4:
P RPGA DADC3R D TS= MPE G02x A8A1C dDDP9 W0MAPR71O cML

C
ACFoUSrce 2chE F=o r mat: 0xD0TS0 00DT0S0H1D0
0 E3 CDAUDP MSLEP =A A C0 WxMA0=P0=0R=O0= 0=0
0
S
0t a0frxt9 0Po0lw0ue0sr0h0 O8dn:v rM0 uxs0i0c0 0F0l0o00w
xm0[0A0U0DI0Oe0 W0Am0RN Io0NG]xr 00
1y[0 A0=]0 0mad=l =l0=ox=c8
0 f08x00000002
0 000x,9 b0u0t 0i0t'0l1l m8a: llo0cx0 0 000x000004000 000x00
0000001 0x00000000 0x81ece684
f0x9p00o0w0er02 8o:n 0mxubsi0c0 c0rfeatfe0 a1o 0 xofk
0dfiniffsfhf fp ower0 xo0n00 0m0usic0 0c0r 0exa0te
W0[0A00U0DIO0
A R0NxI90N0G] [_0A0O_0g38e:t _fir0sxt0_00v0a0lid_0c0h0I 0DxX0 inv0a0l00i0d]
00[A O0x]0[0raw 0c0o0n00f0i g:HD0MxI(00)0,0S00P0D0IF(00)
0
x[AO]9S00P0D0IF S0E48L:E CTIO0Nx:0 00PCM 0F0I0F00O[ A0xU0D0IO W0A0R0N00I0N G] [0_x0A0O_g0e0t0_00f0i rst_0vxa0l00i0d0_chI0D0X0
0 n0valixd9]00
0058:W a0it Vxi0d0e0o00 0Set0 0T V0 x0S0y0ste0m0 0-0--0 B0exg0i00n
!!! BO0N0D I0xN0G0 WA0R0N0I0N00G
8: N O0 xI9N0I0T0!0!0!6
b N e0wx0 F0or0am0t0aat0_!0r!0 e00xx0_00000s0000000c,00 M0aP nE0Gx
20[0D0E_fCf]d0es4la yt0ed orxp8 1ies crOfeFf(F82!c8
7
r0aw0AxO9][0
00co0n7f8i:g: H0DxM8I1f(0)7,fS9P7D0I F0(x08)1]f
b[5AO0]cS8P D0IxF8 1SfEbL5E0CcT8I O0Nx8:1 ePcCfMf 2FIFOc
0xa1d909a0: 0x3c0481fb 0x0c7b30a1 0x24846944 0x087641d7
10xa1adt909ba0_: 0xp3oc03ar0t00 0[x08e05]0=000 90dx3c054d81fb2 00x020000302

ROS Unexpected interrupt error or exception!!
ata_device=9d5d2310
ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf
ata1: hard resetting link
BGA Packagere-scan card

clear pli setting....
ata1: SATA link down (SStatus 0 SControl 300)
ata1: EH complete
================================================
================================================
root execute DvdPlayer...
================================================
================================================
[=EMS=][0x400]---CFTOObjMgr::[0x1aedfaa0]
downloader 0 starts, 0x28b8810
downloader 1 starts, 0x28b8920
finish default module register
finish rtse module register
finish devmem module register
finish rtk_keyboard module register
finish keyboard module register
finish ps2mouse module register
(t=1024) +DfbProcessAP::DfbProcessAP(const char*, const char*):
(t=1024) +DfbProcessAP::DfbProcessAP(const char*, const char*):
[Dlna DMR] this is GDlnaMediaRendererAP
CMD: mkdir -p /tmp/netb/smb
In my system...
CMD: mkdir -p /tmp/smb
In my system...
CMD: ifconfig > /tmp/netb/samba_my_ip
In my system...
Warning!! the Mask is 255.0.0.0.
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use






WARNING WARNING WARNING m_db_manage_flag_cnt = -1





DB FILENAME = /tmp/ramfs/Setup
[DataObject.cpp 464]DB Develop Version same . Don't be upgrade.
[DataObject.cpp 503]DB Version same . Don't be upgrade.



m_BookMark_Size=4096 m_Signature_Size=16


GrandMa Revision: 457247
Power Starting ..
!!!BootUP!!!
Bootup t1 = 1262304068.486 sec
In my system...
*****check animation logo...
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
[MediaServer.cpp,threadApCmd,407] - thread stopped try times = 31
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0 *** 476MB version...

Killing DvdPlayer*******************
pli auth: memory address 0x40000000...
initialization...
remount RO: ...
RootApp is rebooting...
Eva Vision Mini
alnor
 
Posts: 4
Joined: 07 Nov 2015, 00:26

Re: восстановление при самой неудачной прошивке saturn(1186)

Postby Virtual » 07 Nov 2015, 10:26

вставь флешку с прошивкой, и при включении в консоли зажми кн. [TAB]
марсы: HDS7 (смотрелка AMP скин vrt )
HDR12 AMP (обычно сервер с RAM 256 и 2 SATA диска 2T+)//но очень иногда оцифровка видео
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.90 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6862
Joined: 01 Oct 2010, 17:17
Location: RU

Re: восстановление при самой неудачной прошивке saturn(1186)

Postby alnor » 07 Nov 2015, 15:00

К сожалению с TAB-ом не получается. Визуально логи отличаются только наличием этих самых табов, все порты флэшек и SD игнорятся. (да, на флэшку клал install.img c буткодом для Ева от iNext)

| +
?hello.world
efghhhhhhhhhhhhhhhhhhihhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhjk
Jump!
Orginal init value: 020E5DB1
cde
profile->manufacturer_id (first 4B):9A94D7AD
profile->data_per_page:2000
profile->page_per_block:100

blk 79 starts from page 700
klmnopqrstu5280 wait5280 wait4K&load bbt...load env to (addr 0xa0010000, size 64KB)...
page_start=0xf00 page_end=0x1900
EPHY: 8211E
[HDMI]: Set I2C Speed = 50 kHz
[HDMI]: Chk_HotPlug() TV is connected.
[HDMI]: Tx Reads EDID from Rx. block=0
[HDMI]: EDID chksum valid!!! chksum=9472
HDMI DEVICE
PAL logo
[VFD] init

REALTEK ROM Monitor, Revision KIIE.0402.1057.
Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved.

For a list of available commands, type 'help'.

Compilation time /version= Dec 28 2011 10:19:41 /KIIE.0402.1057
MAC address = 00.11.22.33.44.55
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00
Processor ID/revision = 0x93 / 0x85
Endianness = Little
Flash memory size = 4 GByte
SDRAM size = 512 MByte
First free SDRAM address = 0x800b1000

Press 'ESC' to Monitor mode
____________________[VFDSTR] LOADING
Set ethernet register: 00000044
??Linux Kernel:
FW Image from 0xa2200000, to 0x80100000, size=0x59bdac
Audio FW:
FW Image from 0xa2800000, to 0x81b00000, size=0x20a308
Video FW:
FW Image from 0xa2c00000, to 0x81d80000, size=0x242810
Audio data:
FW Image from 0xa3000000, to 0x83600000, size=0x68c78
Video data:
FW Image from 0xa3200000, to 0x83700000, size=0x5c0c2
REG32(Audio_Mute_GPIO)=0xa
5280Go 5280Go
HDMI Raw Enable: MPG AC3 DFTS ATMAPELG 2E RRAOARC
PDVPi dWeMo A5P1R8O 58ML4
E
P
MS P D I =F Ra0wx8 1Enda9b09lbe4:
ceRGA DADCR 3 D=T S 0 Mx8PSECGP2U _ACALCK D9D0PK =W10Md.A0P1R3O s9M0L7P1
c
.
oU
T rSEc e =2c h 0xF0o0r0ma0t0:0 1D0
ASE CDTASUHSDE =AC 3 0 xDD0P0 0M0L0P00 0A
0C 0WxMA9P0R00O0 0
8
: S0txa1rt2 3P45o6w7e8r O0nx 12M3u4si5c6 7F8 l0oxw1
3456[7AU8D I0Ox1 2W3AR4N5I6N78G]
0
8x 9[A00]0 0m0al1l8o: c0 x 10x20304056270800 00,x 12b3u4t5 i6t7'8 l0lx 1ma2l3l4o56c7 8 0 x00x01203440500607

a0x90000028: 0x12345678 0x12345678p o0wx1e2r3 4on5 6m78u s0ixc 1c2r3e45a6t7e 8
xo o k0
790f0i0n0is0h3 8p: o0wxer1 2o3n45 6m7u8si c0 x1c2r3e4at5e6
8 [0AxU1DI2O3 4W56A7R8N I0xN1G2] 34[5_6A7O8_g
2o_ f0ixr9s00t0_0v0al4i8d: _0cxh1ID2X3 4i56n7v8al i0dx]1g
063 [0AxO8]0[1r0a0w0 0c0o nmftidgp:aHrDtMsI=(r0t)k,_SnPaDn4dIF5:(63078)86] 8
lOs_tgyepte_=fsiqrusats_hvfasl irdo_octh=I3D1X: 0i1n v lFoIcFaOl[2/A3eU4tD5cI6)O7, 82W 1A02Rx9N19I22N3kG4 ]5r 6o[7o_8tA

x9dd 0]e
b f0e0r00W0a i58t: V0ixd1e2o3 6S45e6t2 78T V5 0xS1yps23t e4lm5o 6g-7o-8 ,- sBteigliln
Nla0c kB
IDxRI1eN2sG3e 4tW5 A6ER7tN8hI eN0rGxn!1e!2t!3 4MN5aO6c 7.I8

!x
0 !9

10AN0e0w0d F6dor8rma:t !0e! xs 01sx2 03=04 05006x08000100,0 07M8P E0Gx
][0D0E
7ve2l3a4y56e7d8 rp i0sx1L O2iF3nF4u!5x 6
A]8e[rAsOi]o[nr a2w. 6c.o3n4f-iVgE:NHUDSM I( r(00o)xo,1tS2@P3RD4TI5DF6M(7P08S)
0-
) 02[xA9O0]0S0P0D0I7F8 :S E0LxE1C2T3I4O5N6:7 8P C0Mx 1F2I3F4O5) 6(gc78c v 0ersx1ion23 4.453.667 208 1100x21812 (p34rer56ele78ase
0a (GC0xC) a1) #d91 P09REEa0MPT: Th0xu N3cov 0422 8117:fb48: 038 x0CSTc7 20b312

1 Rea0xlte24k L84INU69X 4star4 ted0x...08
V76enu41s sd7ett
xa 0g:
R1dOSs90 ha9bve 0:419 0430x34 bc0yte3as R00AM.0
0xSys8etem05 CP00U h00as 01 Ux3ARTc0.
al 1Sfystb em 0xCPU02 us00es 30int21ern
ROtimS er Unintexerrpeuptct.
ion Bo iotlntoaderer ruverptsio en: rrKIIorE.0 o402r .10ex57.ce Thptiis ovn!ers!
string is of new format.
The information of this board: Company ID:0x0 CPU ID: 0x4 Board ID: 0x402
Ethernet Mac address: 00.11.22.33.44.55
Model Config length=3
Base year of RTC is 2010.
audio addr: 1b00000
Config serial console: console=ttyS0,115200n8r
bootconsole [early0] enabled
CPU revision is: 00019385 (MIPS 24Kc)
FPU revision is: 01739300
Determined physical RAM map:
memory: 00100000 @ 00000000 (reserved)
memory: 01a00000 @ 00100000 (usable)
memory: 00500000 @ 01b00000 (reserved)
memory: 0e000000 @ 02000000 (usable)
memory: 00100000 @ 10000000 (reserved)
memory: 07f00000 @ 10100000 (usable)
memory: 00100000 @ 18000000 (reserved)
memory: 05b00000 @ 18100000 (usable)
Wasting 8192 bytes for tracking 256 unused pages
Zone PFN ranges:
DMA 0x00000000 -> 0x00002000
Normal 0x00002000 -> 0x0001dc00
Movable zone start PFN for each node
Node 0: 23552
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x0001dc00
zone DMA size: 2000 realsize: 2000
zone Normal size: 3c00 realsize: 3c00
zone Movable size: 18000 realsize: 18000
zonelist: Movable Normal DMA
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 121856
Kernel command line: mtdparts=rtk_nand:3868672k,88064k(/),24576k(/usr/local/etc),212992k rootfstype=squashfs root=31:01 console=ttyS0,115200n8r ip=192.168.0.9::192.168.0.254:255.0.0.0:::
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, PIPT, no aliases, linesize 32 bytes
Writing ErrCtl register=00018a29
Readback ErrCtl register=00018a29
Memory: 468732k/479232k available (4386k kernel code, 10500k reserved, 1170k data, 184k init, 0k highmem)
Disable zone Movable
hole addr: 65536 size: 256
hole addr: 98304 size: 256
*****reserve DVR zone...
NR_IRQS:8
Estimated CPU frequency: 796.53 MHz
Console: colour dummy device 80x25
Calibrating delay loop... 530.84 BogoMIPS (lpj=2654208)
Mount-cache hash table entries: 512
devtmpfs: initialized
NET: Registered protocol family 16
prom_flashsize = 0x100000000
Flash size is 0x2000000
registering PCI controller with io_map_base unset
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.22.1.
[PCI] CFG WARNING,Read config data ((null)) failed - timeout
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource MIPS-DMP
Switched to NOHz mode on CPU #0
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.




***************** se init module *********************



se init module major number = 253
size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52...
[user land] CmdBuf virt addr = 9d904000/bd904000, phy addr=1d904000
[MCP] Info, mcp device detected ...
init_vdso successfull
rtktlb: Hello, Realtek TLB Mapper...
AllocBP size: 1277952 order: 9 offset: 8192
<<<DVR FREE AREA>>>
0: 0
1: 0
2: 0
3: 0
4: 0
5: 0
6: 0
7: 0
8: 2
Addr: 90100000, order: 8
Addr: 98100000, order: 8
9: 2
Addr: 90200000, order: 9
Addr: 98200000, order: 9
10: 2
Addr: 90400000, order: 10
Addr: 98400000, order: 10
11: 2
Addr: 90800000, order: 11
Addr: 98800000, order: 11
12: 2
Addr: 91000000, order: 12
Addr: 99000000, order: 12
13: 2
Addr: 82000000, order: 13
Addr: 92000000, order: 13
14: 4
Addr: 84000000, order: 14
Addr: 88000000, order: 14
Addr: 8c000000, order: 14
Addr: 94000000, order: 14
squashfs: version 4.0 (2009/01/31) Phillip Lougher
<mtp module> insert mtpfs module OK
NTFS driver 2.1.29 [Flags: R/O].
YAFFS Driver Rev:329787 (2010-10-05)
YAFFS Driver is successfully installing.
msgmni has been set to 915
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
Realtek NAND Flash Driver Rev:337905 (2010-10-18)
(X)Enable interrupt mechanism of NAND driver.
Get parameter from register...
[rtk_nand_init]Bootcode size 0x3200000
[rtk_nand_init]Factory parameter size 0x400000
[rtk_nand_init]Disable NFCP...
nand_base_rtk version:0824-2011
(X)NAND_POWEROFF_CARDREADER_WITH_MULTI_READ
(X)NAND_READ_SKIP_UPDATE_BBT
READ ID:0xad 0xd7 0x94 0x9a 0x74 0x42
One H27UBG8T2A chip has 1 die(s) on board
nand part=H27UBG8T2A, id=add7949a, device_size=4294967296, chip_size=4294967296, num_chips=1, page_size=8192, isLastPage=1, eccBits=24
[rtk_nand_scan_bbt] have created bbt B1, just loads it !!
[dump_BBT] Nand BBT Content
Congratulation!! No BBs in this Nand.
4 cmdlinepart partitions found on MTD device rtk_nand
RTK: using dynamic nand partition
Creating 4 MTD partitions on "rtk_nand":
0x000000000000-0x0000ec200000 : "Partition_000"
0x0000ec200000-0x0000f1800000 : "/"
0x0000f1800000-0x0000f3000000 : "/usr/local/etc"
0x0000f3000000-0x000100000000 : "Partition_003"
0x000000000000-0x000100000000 : "disc"
[rtk_nand_init]Ecc bit select 24
Realtek Nand Flash Driver is successfully installing.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
8139cplus: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
this Jupiter eth RX_OFFSET = 0x0
MAC address = 0x00.11.22.33.44.55
eth0: RTL-8139C+ at 0xb8016000, 00:11:22:33:44:55, IRQ 2
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
Initializing USB MTP/PTP driver...
usbcore: registered new interface driver usb-mtp
USB MTP/PTP support registered.
mice: PS/2 mouse device common for all mice
rtc-rtk_dmp_venus rtc-rtk_dmp_venus.0: rtc core: registered rtc-rtk_dmp_venus as rtc0
rtc: Real Time Clock of Realtek DMP's Venus series CPUs
i2c /dev entries driver
[I2C0] i2c speed changed to 100 KHz
I2C0 Bus Status Check.... OK
=========================
= VER : 2.1b
=========================
= PHY : 0
= MODEL: Saturn
= SPD : 100
= SAR : 0x024 (7 bits)
= TX FIFO DEPTH : 32
= RX FIFO DEPTH : 32
= FIFO THRESHOLD: 4
= BUS JAM RECORVER 3: ON
= NON STOP WRITE : ON
= GPIO RW SUPPORT : ON
=========================
[I2C1] i2c speed changed to 100 KHz
I2C1 Bus Status Check.... OK
=========================
= VER : 2.1b
=========================
= PHY : 1
= MODEL: Saturn
= SPD : 100
= SAR : 0x024 (7 bits)
= TX FIFO DEPTH : 32
= RX FIFO DEPTH : 32
= FIFO THRESHOLD: 4
= BUS JAM RECORVER 3: ON
= NON STOP WRITE : ON
= GPIO RW SUPPORT : ON
=========================
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.1.0)
cec_core_init, register cec_bus 806640b0
saturn cec module init
register cec driver 'mars_cec' (80664170)
register cec device 'mars_cec' (806641e0) to cec0
probe : cec_dev 'mars_cec' (806641e0), cec_drv 'mars_cec' (80664170)
Open Mars CEC
cp_hotplug
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
#0: Mars 1
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
<<<<< Enable memory protector >>>>>
rtk_enable_kcpu : Code Size = 6888 , Data Size = 2456
Saturn_Param_PWM_Irda_Key.protocol = 0
Saturn_Param_PWM_Irda_Key.power_key = 0xff00fc03
Saturn_Param_PWM_Irda_Key.eject_key = 0xe817fc03
Saturn_Param_PWM_GPIO_Key.power_key_number = -1
Saturn_Param_PWM_GPIO_Key.eject_key_number = -1
_soeeptext = 0x80546e98 , _esleeptext = 0x80548980
_sleepdata = 0x8066caa0 , _esleepdata = 0x8066d438
Realtek Saturn Power Management, (c) 2011 Realtek Semiconductor Corp.
avcpu: audio & video cpu driver for Realtek Media Processors
cp_open
init_hw

eth0: Set multicast.
cp_status not on
jupiter/saturn 1g
init_hw finished

eth0: Set multicast.

eth0: Set multicast.

eth0: Set multicast.
ADDRCONF(NETDEV_UP): eth0: link is not ready
IP-Config: Complete:
device=eth0, addr=192.168.0.9, mask=255.0.0.0, gw=192.168.0.254,
host=192.168.0.9, domain=, nis-domain=(none),
bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
VFS: Mounted root (squashfs filesystem) readonly on device 31:1.
devtmpfs: mounted
Freeing unused kernel memory: 184k freed
Welcome to Realtek Linux

Please press Enter to activate this console. mount: mounting devpts on /dev/pts failed: No such file or directory
Venus rtc cannot work.
yaffs: dev is 32505858 name is "mtdblock2" rw
yaffs: passed flags ""
mkdir: can't create directory '/var/run': File exists
Starting INET services....
Realtek Bulid-In SATA Driver Rev:SATURN (2012-06-27 14:20)
sata_rtk sata_rtk: version 0.01
sata_rtk sata_rtk: slots 32 ports 1
scsi0 : sata_rtk
rtksdio: 0xb800036c = 0x555d4844
Realtek Card-Reader Driver Rev:SATURN (2012-02-08 13:50)
rtksdio: power_gpio = 0xb801b110
ata1: SATA max UDMA/133 irq 4
BGA Package
rtksdio: power_bits = 31
rtksdio: clk change to 15MHz
mmc0: rtksdio driver initialized,
Realtek Card-Reader Controller Driver is successfully installing.

2010-01-01 00:00:06: (log.c.166) server started
pvrsrvkm: module license 'Proprietary. Send bug reports to ip-support@powervr.com' taints kernel.
Disabling lock debugging due to kernel taint
ata1: SATA link down (SStatus 0 SControl 300)
continus.
dcMal 9c000000 vir2Phy:1c000000 3686400
system buffer:9c000000,0,1c000000
continus.
dcMal 9c400000 vir2Phy:1c400000 3686400
system buffer:9c400000,0,1c400000
continus.
dcMal 9c800000 vir2Phy:1c800000 3686400
system buffer:9c800000,0,1c800000
hotplug eth0: link up, 1000Mbps, full-duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

eth0: Set multicast.
Hotplug got one Net Hotplug of "LinkUP" from "eth0".
/etc/init.d/rc.pvr: line 175: /usr/local/bin/pvrsrvinit: Permission denied
pvr init fail
LOAD_RETYR.................
rmmod: remove 'pvrsrvkm': Resource temporarily unavailable
free psDevInfo->psSystemBuffer@(null)
free psDevInfo->psSystemBuffer@(null)
Unloaded PowerVR consumer services.
continus.
dcMal 9c800000 vir2Phy:1c800000 3686400
system buffer:9c800000,0,1c800000
continus.
dcMal 9c400000 vir2Phy:1c400000 3686400
system buffer:9c400000,0,1c400000
continus.
dcMal 9c000000 vir2Phy:1c000000 3686400
system buffer:9c000000,0,1c000000
/etc/init.d/rc.pvr: line 175: /usr/local/bin/pvrsrvinit: Permission denied
pvr init fail
LOAD_RETYR................. 1
rmmod: remove 'pvrsrvkm': Resource temporarily unavailable
free psDevInfo->psSystemBuffer@(null)
free psDevInfo->psSystemBuffer@(null)
Unloaded PowerVR consumer services.
continus.
dcMal 9c000000 vir2Phy:1c000000 3686400
system buffer:9c000000,0,1c000000
continus.
dcMal 9c400000 vir2Phy:1c400000 3686400
system buffer:9c400000,0,1c400000
continus.
dcMal 9c800000 vir2Phy:1c800000 3686400
system buffer:9c800000,0,1c800000
/etc/init.d/rc.pvr: line 175: /usr/local/bin/pvrsrvinit: Permission denied
pvr init fail
LOAD_RETYR................. 2
rmmod: remove 'pvrsrvkm': Resource temporarily unavailable
free psDevInfo->psSystemBuffer@(null)
free psDevInfo->psSystemBuffer@(null)
Unloaded PowerVR consumer services.
continus.
dcMal 9c800000 vir2Phy:1c800000 3686400
system buffer:9c800000,0,1c800000
continus.
dcMal 9c400000 vir2Phy:1c400000 3686400
system buffer:9c400000,0,1c400000
continus.
dcMal 9c000000 vir2Phy:1c000000 3686400
system buffer:9c000000,0,1c000000
/etc/init.d/rc.pvr: line 175: /usr/local/bin/pvrsrvinit: Permission denied
pvr init fail
LOAD_RETYR................. 3
rmmod: remove 'pvrsrvkm': Resource temporarily unavailable
free psDevInfo->psSystemBuffer@(null)
free psDevInfo->psSystemBuffer@(null)
Unloaded PowerVR consumer services.
continus.
dcMal 9c000000 vir2Phy:1c000000 3686400
system buffer:9c000000,0,1c000000
continus.
dcMal 9c400000 vir2Phy:1c400000 3686400
system buffer:9c400000,0,1c400000
continus.
dcMal 9c800000 vir2Phy:1c800000 3686400
system buffer:9c800000,0,1c800000
/etc/init.d/rc.pvr: line 175: /usr/local/bin/pvrsrvinit: Permission denied
pvr init fail
LOAD_RETYR................. 4
rmmod: remove 'pvrsrvkm': Resource temporarily unavailable
free psDevInfo->psSystemBuffer@(null)
free psDevInfo->psSystemBuffer@(null)
Unloaded PowerVR consumer services.
more than retry time
Running dvdplayer with RootApp
RootApp AVHDD version...
ente*** 476MB version...
r 2nd case...
pli initialization...
auth: memory address 0x40000000...
=====clear pli setting....
===== reg_cold_rst(0) =============
========== change reg_cold_rst to warm boot(0x2)
================================================
================================================
root execute DvdPlayer...
================================================
================================================
[=EMS=][0x400]---CFTOObjMgr::[0x1aedfaa0]
WatchDog does not receive signal for 2 seconds, value: 0
IN : /tmp/ramfs/smb
downloader 1 starts, 0x28b8920
downloader 0 starts, 0x28b8810
finish default module register
finish rtse module register
finish devmem module register
finish rtk_keyboard module register
finish keyboard module register
finish ps2mouse module register
(t=1024) +DfbProcessAP::DfbProcessAP(const char*, const char*):
(t=1024) +DfbProcessAP::DfbProcessAP(const char*, const char*):
[Dlna DMR] this is GDlnaMediaRendererAP
CMD: mkdir -p /tmp/netb/smb
In my system...
CMD: mkdir -p /tmp/smb
In my system...
CMD: ifconfig > /tmp/netb/samba_my_ip
In my system...
Warning!! the Mask is 255.0.0.0.






WARNING WARNING WARNING m_db_manage_flag_cnt = -1





DB FILENAME = /tmp/ramfs/Setup
[DataObject.cpp 464]DB Develop Version same . Don't be upgrade.
[DataObject.cpp 503]DB Version same . Don't be upgrade.



m_BookMark_Size=4096 m_Signature_Size=16


GrandMa Revision: 457247
[WARNING]: COLD Starting changed to Power Starting..
!!!BootUP!!!
Bootup t1 = 1262304017.233 sec
I*****check animation logo...
n my system...
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
Killing DvdPlayer*******************
killall: wpa_supplicant: no process killed
killall: hostapd: no process killed
killall: udhcpd: no process killed
killall: udhcpc: *** 476MB version...
no process killed
pli initialization...
auth: memory address 0x40000000...
[RPC]: AVCPU_RESET_PREPARE...
### reset audio & video - saturn version ###
5280 wait5280 wait

avcpu: >>>>>> Got NAND Flash device!

avcpu: flash_type: 4
avcpu: boot_code_size: 3600000
avcpu: fast_nand_read_oob from: 3600000, len: 2000 buf: 9d552000
avcpu: fw_desc_table_v1->signature = VERONA__
avcpu: fw_desc_table_v1->version = 0x1
avcpu: fw_desc_table_v1->part_list_len = 0xc0
avcpu: fw_desc_table_v1->fw_list_len = 0x100
avcpu: fw_desc_table_v1 = 0x9d552000
avcpu: part_entry = 0x9d552020
avcpu: part_count = 0x4
avcpu: fw_entry = 0x9d5520e0
avcpu: FW type, 0x2
avcpu: Audio FW found: 9d552100
avcpu: Video FW found: 9d552120
avcpu: FW type, 0xa
avcpu: FW type, 0xb
avcpu: audio_fw_entry->offset = 0x3e00000
avcpu: audio_fw_entry->length = 0x20a308
avcpu: audio_fw_entry->target_addr = 0x81b00000
avcpu: fast_nand_read_oob from: 3e00000, len: 20c000 buf: 81b00000
ret: 20c000 length: 20a308
audio entry value: 0000b081
avcpu: video_fw_entry->offset = 0x4200000
avcpu: video_fw_entry->length = 0x242810
avcpu: video_fw_entry->target_addr = 0x81d80000
avcpu: fast_nand_read_oob from: 4200000, len: 244000 buf: 81d80000
ret: 244000 length: 242810
video entry value: 0000d881
]280Go 5280Go [RPC
D D:M IA VRCaPwU _ERnabEle:F AMSPTGA LA ECER3R DOTTR_S
WMAVOiPdEGe2 oNA A5C1 8D5D8P4
M EPE.RP.OC.
L P =
0
nxSP81DIdF 90Raw9b E4
P WRlAeD:D RMP G =AC 3 0DxT8S1 dMPEG920 A7A1C DcD
MCAPRAUOS MEL P

:Fo r0cex 02ch00 Fo0r00m1a0t
=ODTSEC DATUSSHED =AC 3 0DDxP0 0M0L0P0 0AA0=C =WM=AP0=R
f
0l
0 xuS90tsahr0 0t 0P0o0w8er:d vO0rnx 0mM0eu0ms0oi0rc0y 0F0l o0wx
000 [0=0AUD0=0IO0= 0WxA0R0N0ING0=0]
A =[0
02 mda l0lxo8c1 f8 000x0000
1 0 0000x,9 0b0u0t0 0i1t8':l l0 xm0a0l0l0o0c0 0 00 x00x00004000000000
0x00000000 0x81ece684
f0x9po0w0e0r0 0o2n8 :m u0sxibc0 0c0rfefa0t1e 0axof fokd
0fifnifshf pfo w0er x0on00 0mu0si0c 00cr 0eatx0e
O [00AU0D0I0
W 0ARNx9IN00G] 0[_0A0O_38get: _f0ixrs00t_00va0l0id00_c h0IDx0X i00nv0a0l00id]0
,x0[0AO]00[r0a0w 00co n0xfi0g0:00H0D0MI(000)
S 0PDIxF(90)00]0
v[0A48O]:S 0PxD0IF0 S00ELE00CT00ION 0: xP0CM00 F00IF0O0[0 A0UDxIO00 W0A0RN0I0N0G] 0[ _AO0x_g0et00_f0i00r0s0t_
0a lid0x_c90hID00X 0i0nv5al8id: ]
x00000Wa0it0 V0 ide0o x0Se0t00 T00V S0y0s t0exm0 ---00 0Be00gi00n
0x00 B0O0N0D00I0NG
W A0RNxI9N0G0!0!0!06 N8O: 0IxNI0T!0!0!
04e0w F0o0r0m 0axt!!0a 0t 0a00x00000000 00x0b0000,0 M_PfrEeGf_
i [ D0EsxC]dce8a1laeycedfn fr8pc
00 0OxF_9F! 0s
if[0tA0O]7o[8r:rea (w02 x8c82o17nf)f7
f g9:7H0D M0Ix(801)f,bS50PcD8I F0(x0)81]
PCM O]SP0Dc8I F0 xS8E1LeECTcIffO2Nc:
F I0FxOa1d909a0: 0x3c0481fb 0x0c7b30a1 0x24846944 0x087641d7
00xa1d909b0: 0x3c03a0a00t a0_x8peo0r50t0[000 ]0=x93cd034f816f0b0 00x
2003021
ROS Unexpected interrupt error or exception!!
ata_device=9d3f6310
ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf
ata1: hard resetting link
BGA Package re-scan card

clear pli setting....
ata1: SATA link down (SStatus 0 SControl 300)
ata1: EH complete
================================================
================================================
root execute DvdPlayer...
================================================
================================================
[=EMS=][0x400]---CFTOObjMgr::[0x1aedfaa0]
downloader 0 starts, 0x28b8810
finish default module register
finish rtse module register
finish devmem module register
finish rtk_keyboard module register
finish keyboard module register
finish ps2mouse module register
downloader 1 starts, 0x28b8920
(t=1024) +DfbProcessAP::DfbProcessAP(const char*, const char*):
(t=1024) +DfbProcessAP::DfbProcessAP(const char*, const char*):
[Dlna DMR] this is GDlnaMediaRendererAP
CMD: mkdir -p /tmp/netb/smb
In my system...
CMD: mkdir -p /tmp/smb
In my system...
CMD: ifconfig > /tmp/netb/samba_my_ip
In my system...
Warning!! the Mask is 255.0.0.0.
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use






WARNING WARNING WARNING m_db_manage_flag_cnt = -1





DB FILENAME = /tmp/ramfs/Setup
[DataObject.cpp 464]DB Develop Version same . Don't be upgrade.
[DataObject.cpp 503]DB Version same . Don't be upgrade.



m_BookMark_Size=4096 m_Signature_Size=16


GrandMa Revision: 457247
[WARNING]: COLD Starting changed to Power Starting..
!!!BootUP!!!
Bootup t1 = 1262304068.294 sec
In my*****check animation logo...
system...
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
WatchDog does not receive signal for 2 seconds, value: 0
MediaServer.cpp , 433 bind local IP fail !!error = Address already in use
[MediaServer.cpp,threadApCmd,407] - thread stopped try times = 31
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value: 0
WatchDog does not receive signal for 2 seconds, value:*** 476MB version...
0
Killing DvdPlayer*******************
pauth: memory address 0x40000000...
li initialization...
remount RO: ...
RootApp is rebooting...
Eva Vision Mini
alnor
 
Posts: 4
Joined: 07 Nov 2015, 00:26

Re: восстановление при самой неудачной прошивке saturn(1186)

Postby maximen » 07 Nov 2015, 20:16

Как вариант, попробуй поменять консольный кабель, тк мне порадался кабель какой не принимал команды и файлы, а логи передавал.
Saturn: iconBIT XDS73d mk2(inext_hd1_225_r0)
Android tv box: Tox1, 2 * X3 Cube
User avatar
maximen
 
Posts: 771
Joined: 21 Feb 2012, 16:07
Location: Донбасс

PreviousNext

Return to Hardware

Who is online

Users browsing this forum: No registered users and 20 guests

cron