Восстановление при самой неудачной прошивке Mars(1073/1283)

о железе плеера и о периферии

Re: Как восстановить после неудачной прошивки.

Postby valikit » 05 Dec 2013, 10:29

На шланге только 5в.
Xtreamer SW3_4.2.3B
valikit
 
Posts: 38
Joined: 02 Feb 2013, 01:21

Re: Как восстановить после неудачной прошивки.

Postby Virtual » 05 Dec 2013, 18:03

на разьеме плеера последний пин должно появится 3.3в
Attachments
uart.JPG
uart.JPG (47.97 KiB) Viewed 5284 times
марсы: HDS7 (смотрелка AMP скин vrt )
HDR12 AMP (обычно сервер с RAM 256 и 2 SATA диска 2T+)//но очень иногда оцифровка видео
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.90 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6862
Joined: 01 Oct 2010, 17:17
Location: RU

Re: Как восстановить после неудачной прошивки.

Postby valikit » 05 Dec 2013, 22:17

получилось вот мой лог | +
?hello.world
efghhhhhhhhhhhhhhhhhhhhhhhihhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhjk
Jump!
NAND
1
cde2
decrypt Jump!klmnopqrstu5280 wait5280 wait4K&Detect H27UBG8T2B and enable read-r
etrial mode...
Enable Read-retrial mode...


$$run 1,[Run 0]


$$run 2,[Run 0]
load bbt...load env to (addr 0xa0010000, size 64KB)...
page_start=0x1300 page_end=0x1900
get ENV fail!!
EPHY: 8211E
[HDMI]: Set I2C Speed = 50 kHz
[HDMI]: Chk_HotPlug() TV is not connected.
[HDMI]: Read_EDID abort, HDMI cable plug off.
[HDMI]: TV is not connected.
PAL logo

REALTEK ROM Monitor, Revision IIIM.0402.3057.
Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved.

For a list of available commands, type 'help'.

Compilation time /version= Apr 27 2013 16:28:41 /IIIM.0402.3057
MAC address = 00.11.22.33.44.55
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00
Processor ID/revision = 0x93 / 0x85
Endianness = Little
Flash memory size = 4 GByte
SDRAM size = 512 MByte
First free SDRAM address = 0x800b0000

Press 'ESC' to Monitor mode
____________________Set ethernet register: 00000044
Linux Kernel:
FW Image from 0xa2200000, to 0x80100000, size=0x74421c
[ERROR] MD no response
Audio FW:
FW Image from 0xa2a00000, to 0x81b00000, size=0x1c8dc0
Video FW:
FW Image from 0xa2c00000, to 0x81d80000, size=0x23df80
REG32(Audio_Mute_GPIO)=0xa
5280Go 5280Go SCPU_CLK90K=0.000 sec.
go 0x80100000 mtdparts=rtk_nand:71680k,641024k(/),51200k(cache),3217408k(/usr/lo
cal/etc),212992k rootfstype=yaffs2 root=31:01
defer 625p logo, still black
Reset Ethernet Mac.


Address = 0x80100000

* Exception (user) : TLB (load or instruction fetch) *
BadVAddr = 0x00005d9c Cause = 0x08800008
Compare = 0x00000000 Config = 0x80040483
Config1 = 0xbea3719f Config2 = 0x80000000
Config3 = 0x00002020 Context = 0xca000020
Count = 0xbfdbf4c8 DEPC = 0xffdb4574
Debug = 0x0201ac30 EBase = 0x80000000
EPC = 0x80100000 EntryHi = 0x00004000
EntryLo0 = 0x03cfdd50 EntryLo1 = 0x02f3dbbd
ErrorEPC = 0x6fd088fa HWREna = 0x00000000
Index = 0x8000001e IntCtl = 0xe0000000
PRId = 0x00019385 PageMask = 0x0007e000
Random = 0x00000018 SRSCtl = 0x00000000
SRSMap = 0x00000000 Status = 0x04008c03
Wired = 0x00000000 Hi = 0x00000008
Lo = 0x00000000

$ 0(zr):0x00000000 $ 8(t0):0x00000000 $16(s0):0x00000000 $24(t8):0x00000000
$ 1(at):0x00000000 $ 9(t1):0x00000000 $17(s1):0x00000000 $25(t9):0x00000000
$ 2(v0):0x00000000 $10(t2):0x00000000 $18(s2):0x00000000 $26(k0):0x00000000
$ 3(v1):0x00000000 $11(t3):0x00000000 $19(s3):0x00000000 $27(k1):0x80069180
$ 4(a0):0x00000004 $12(t4):0x00000000 $20(s4):0x00000000 $28(gp):0x00000000
$ 5(a1):0x800a54b8 $13(t5):0x00000000 $21(s5):0x00000000 $29(sp):0x800af6f0
$ 6(a2):0x8005ef3c $14(t6):0x00000000 $22(s6):0x00000000 $30(s8):0x800af6f0
$ 7(a3):0x20000000 $15(t7):0x00000000 $23(s7):0x00000000 $31(ra):0x800227fc

Realtek>
Xtreamer SW3_4.2.3B
valikit
 
Posts: 38
Joined: 02 Feb 2013, 01:21

Re: Как восстановить после неудачной прошивки.

Postby valikit » 05 Dec 2013, 23:02

ЛОГ ПРОШИВКИ | +
WARNING[51]:TVE i-underflow @ line 313
mount_point / size=0x24000000
Can not find image description, squash, and mount point, /, from flash target!
Can not find image description, yaffs2, and mount point, /usr/local/Resource, fr
om flash target!
size=0x3200000
[ZPL] reserve tag did not found
partition_size=0xc7800000
mount point=/usr/local/etc
Image version: 0x0
Image target addr: 0x0
Image offset: 0x2b800000
Image length: 0x173c40
Image paddings: 0xc7800000
Image checksum: 0x0
command: /flash_erase /dev/mtd0 729808896 1596
In my system...
Erase Total 1596 Units
PerformWARNING[51]:TVE i-underflow @ line 0 offset 0x39800000
Performing Flash Erase of length 209WARNING[51]:TVE i-underflow @ line 313
PWARNING[51]:TVE i-underflow @ line 0152 at offset 0x67a00000
Performing Flash Erase of lengWARNING[51]:TVE i-underflow @ line 313
Performing Flash Erase of length 2097152 at offset 0x95c0WARNING[51]:TVE i-under
flow @ line 0
Performing Flash Erase oWARNING[51]:TVE i-underflow @ line 313
Performing Flash Erase of length 2097152 at offset WARNING[51]:TVE i-underflow @
line 0
Performing Flash EWARNING[51]:TVE i-underflow @ line 31300000
Performing Flash Erase of length 2097152 at oWARNING[51]:TVE i-underflow @ line
0
Performing Flash Erase of length 2097152 at offset 0xf2e00000 done
[time 4751] t=008.610

checkpoint: 4 72888

#######[cfyeh-debug] update_nand_xml(4757) try 1 ...
command: tar -O -xf /tmp/usbmounts/sda4/install.img package5/yaffs2_2.img | /nan
dwrite -c -e -y -n -o -s 729808896 -l 1522752 /dev/mtd0 -
In my system...
nandwrite $ Revision: 1.52 $
struct64...
Linux version 0x2060c
Data buf File I/O error on input file: Unknown error 0
ERR readlen is 8192, cnt is 2112
[time 4786] t=000.713
partition length: 0xc7800000
Image type: yaffs2
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer_offset(2016) fw_entry 0x742e60
partition_size=0x3200000
mount point=cache
Image version: 0x0
Image target addr: 0x0
Image offset: 0x28600000
Image length: 0x3200000
Image paddings: 0x3200000
Image checksum: 0x0
command: /flash_erase /dev/mtd0 677380096 25
In my system...
Erase Total 25 Units
Performing Flash Erase of length 2097152 at offset 0x2b600000 done
[time 4943] t=000.101
partition length: 0x3200000
Image type: yaffs2
Image name: package5/yaffs2_1.img
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer_offset(2016) fw_entry 0x742da0
[ZPL] get_filesize_from_file_t: package5/yaffs2_1.img 603797760
mount point=/
partition_size=0x24000000
Image version: 0x0
Image target addr: 0x0
Image offset: 0x4600000
Image length: 0x22e60800
Image paddings: 0x24000000
Image checksum: 0x0
command: /flash_erase /dev/mtd0 73400320 288
In my system...
Erase Total 288 Units
Performing Flash ErWARNING[51]:TVE i-underflow @ line 313000
Performing Flash ErasWARNING[51]:TVE i-underflow @ line 00000
Performing Flash Erase of length 2097152 at offset 0x28400000 done
[time 5489] t=001.373

checkpoint: 5 75076

#######[cfyeh-debug] update_nand_xml(5495) try 1 ...
command: tar -O -xf /tmp/usbmounts/sda4/install.img package5/yaffs2_1.img | /nan
dwrite -c -e -y -n -o -s 73400320 -l 603797760 /dev/mtd0 -
In my system...
nandwrite $ Revision: 1.52 $
struct64...
Linux version 0x2060c
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0

WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0

WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0

WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0

WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0

WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0

WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313

WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
Writing data finishes !!
[time 5524] t=271.539

checkpoint: 6 346616

partition length: 0x24000000
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742bc0
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742c20
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742c80
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742ce0
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742d40
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742da0
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742e00
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742e60
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742ec0
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742f20
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742bc0
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742c20
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742c80
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742ce0
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742d40
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742da0
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742e00
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742e60
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742ec0
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742f20
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742bc0
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742c20
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742c80
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742ce0
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742d40
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742da0
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742e00
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742e60
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742ec0
#@#[cfyeh-debug] get_fw_desc_entry_v1_pointer(1996) fw_entry 0x742f20
command: dd if=/tmp/fw_tbl.bin of=/dev/mtdblock0 bs=2097152 seek=27
In my system...
0+1 records in
0+1 records out
update_nand_xml (Done.)

checkpoint: 7 347315

ERROR: Install completed !

WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
WARNING[51]:TVE i-underflow @ line 0
WARNING[51]:TVE i-underflow @ line 313
===== flush dvr memory =====
release address: 82000000
--- FREE index: 0 order: 12
release address: 83000000
--- FREE index: 4096 order: 10
release address: 83400000
--- FREE index: 5120 order: 3
release address: 83800000
--- FREE index: 6144 order: 11
release address: 84000000
--- FREE index: 8192 order: 12
release address: 85000000
--- FREE index: 12288 order: 12
release address: 86000000
--- FREE index: 16384 order: 12
release address: 87000000
--- FREE index: 20480 order: 12
release address: 9012c400
release address: 98303900
===== flush dvr memory =====
[total time] t=359.607
rebooting...
WARNING[51]:TVE i-underflow @ line 0

?hello.world
efghhhhhhhhhhhhhhhhhhhhhhhhhhihhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhjk
Jump!
NAND
1
cde2
decrypt Jump!klmnopqrstu5280 wait5280 wait4K&Detect H27UBG8T2B and enable read-r
etrial mode...
Enable Read-retrial mode...


$$run 1,[Run 0]


$$run 2,[Run 0]
load bbt...load env to (addr 0xa0010000, size 64KB)...
page_start=0x1300 page_end=0x1900
get ENV fail!!
EPHY: 8211E
[HDMI]: Set I2C Speed = 50 kHz
[HDMI]: Chk_HotPlug() TV is not connected.
[HDMI]: Read_EDID abort, HDMI cable plug off.
[HDMI]: TV is not connected.
PAL logo

REALTEK ROM Monitor, Revision IIIM.0402.3057.
Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved.

For a list of available commands, type 'help'.

Compilation time /version= Apr 27 2013 16:28:41 /IIIM.0402.3057
MAC address = 00.11.22.33.44.55
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00
Processor ID/revision = 0x93 / 0x85
Endianness = Little
Flash memory size = 4 GByte
SDRAM size = 512 MByte
First free SDRAM address = 0x800b0000

Press 'ESC' to Monitor mode
____________________Set ethernet register: 00000044
Linux Kernel:
FW Image from 0xa2200000, to 0x80100000, size=0x74421c
[ERROR] MD no response
Audio FW:
FW Image from 0xa2a00000, to 0x81b00000, size=0x1cbc30
Video FW:
FW Image from 0xa2c00000, to 0x81d80000, size=0x23df80
REG32(Audio_Mute_GPIO)=0xa
5280Go 5280Go SCPU_CLK90K=0.000 sec.
go 0x80100000 mtdparts=rtk_nand:71680k,589824k(/),51200k(cache),3268608k(/usr/lo
cal/etc),212992k rootfstype=yaffs2 root=31:01
defer 625p logo, still black
Reset Ethernet Mac.


Address = 0x80100000

* Exception (user) : TLB (load or instruction fetch) *
BadVAddr = 0x00005d9c Cause = 0x08800008
Compare = 0x00000000 Config = 0x80040483
Config1 = 0xbea3719f Config2 = 0x80000000
Config3 = 0x00002020 Context = 0x00000020
Count = 0x03255bed DEPC = 0xffdb4574
Debug = 0x0201b831 EBase = 0x80000000
EPC = 0x80100000 EntryHi = 0x00004000
EntryLo0 = 0x00000000 EntryLo1 = 0x0038ea5a
ErrorEPC = 0x80115260 HWREna = 0x00000000
Index = 0x8000001f IntCtl = 0xe0000000
PRId = 0x00019385 PageMask = 0x00000000
Random = 0x00000013 SRSCtl = 0x00000000
SRSMap = 0x00000000 Status = 0x04008c03
Wired = 0x00000000 Hi = 0x00000008
Lo = 0x00000000

$ 0(zr):0x00000000 $ 8(t0):0x00000000 $16(s0):0x00000000 $24(t8):0x00000000
$ 1(at):0x00000000 $ 9(t1):0x00000000 $17(s1):0x00000000 $25(t9):0x00000000
$ 2(v0):0x00000000 $10(t2):0x00000000 $18(s2):0x00000000 $26(k0):0x00000000
$ 3(v1):0x00000000 $11(t3):0x00000000 $19(s3):0x00000000 $27(k1):0x80069180
$ 4(a0):0x00000004 $12(t4):0x00000000 $20(s4):0x00000000 $28(gp):0x00000000
$ 5(a1):0x800a54b8 $13(t5):0x00000000 $21(s5):0x00000000 $29(sp):0x800af6f0
$ 6(a2):0x8005ef3c $14(t6):0x00000000 $22(s6):0x00000000 $30(s8):0x800af6f0
$ 7(a3):0x20000000 $15(t7):0x00000000 $23(s7):0x00000000 $31(ra):0x800227fc

Realtek>
Xtreamer SW3_4.2.3B
valikit
 
Posts: 38
Joined: 02 Feb 2013, 01:21

Re: Как восстановить после неудачной прошивки.

Postby valikit » 07 Dec 2013, 16:24

помогите что делать дальше.
Xtreamer SW3_4.2.3B
valikit
 
Posts: 38
Joined: 02 Feb 2013, 01:21

Re: Как восстановить после неудачной прошивки.

Postby Virtual » 08 Dec 2013, 10:36

нужна прошивка, с принудительной сменой буткода.
ща у вас бут с "какашкой".

?hello.world
efghhhhhhhhhhhhhhhhhhhhhhhihhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhjk
Jump!
NAND
1
cde2
decrypt Jump!klmnopqrstu5280 wait5280 wait4K
&Detect H27UBG8T2B and enable read-retrial mode...
Enable Read-retrial mode
..
марсы: HDS7 (смотрелка AMP скин vrt )
HDR12 AMP (обычно сервер с RAM 256 и 2 SATA диска 2T+)//но очень иногда оцифровка видео
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.90 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6862
Joined: 01 Oct 2010, 17:17
Location: RU

Re: Как восстановить после неудачной прошивки.

Postby maximen » 09 Dec 2013, 00:30

HiHat wrote:В configuration.xml ошибка.
А, надо:
Code: Select all
<install_boot>y</install_boot>


Не путайте, нужна строчка
Code: Select all
<install_bootloader>y</install_bootloader>

Вот конфиг с принудительной установкой бута от инекст в прошке v2.2
| +
Code: Select all
<?xml version="1.0" encoding="ISO-8859-1" ?>
<packageFile>
    <info>
        <company>iNeXT Ukraine</company>
        <description>This image file contains 3 Jupiter packages. The first one is for AVHDD on NOR, the second one is for AVHDD on NAND, and the third one is for AVHDD on ISO image.</description>
        <version>v2.2</version>
        <releaseDate>08/16/13 16:10</releaseDate>
        <signature>Saturn image files</signature>
        <uiLanguage>0</uiLanguage>
    </info>
    <installerAP>
        <fileName>install_a</fileName>
        <hashValue>4407c6d3eb709a062026e34f04101ffc</hashValue>
        <install_bootloader>y</install_bootloader>
    </installerAP>
    <package>
        <info>
            <description>This is Saturn AVHDD on NAND</description>
            <version>N/A</version>
        </info>
        <nand>
            <image type="yaffs2" userDefined="y">
                <fileName />
                <mountPoint>/tmp/preserve</mountPoint>
                <sizeBytesMin>10000000</sizeBytesMin>
            </image>
            <image type="linuxKernel">
                <fileName>package2/vmlinux.develop.avhdd.saturn.nand.bin</fileName>
                <targetAddress>0x80100000</targetAddress>
                <version>SVN:</version>
            </image>
            <image type="audioKernel">
                <fileName>package2/bluecore.audio</fileName>
                <targetAddress>0x81b00000</targetAddress>
                <version>N/A</version>
            </image>
            <image type="videoKernel">
                <fileName>package2/video_firmware.bin</fileName>
                <targetAddress>0x81d80000</targetAddress>
                <version>N/A</version>
            </image>
            <image type="bootloader">
                <fileName>package2/bootloader.tar</fileName>
                <version>N/A</version>
            </image>
            <image type="squash">
                <fileName>package2/squashfs1.img</fileName>
                <mountPoint>/</mountPoint>
            </image>
            <image type="yaffs2">
                <fileName>package2/usr.local.etc.tar.bz2</fileName>
                <mountPoint>/usr/local/etc</mountPoint>
                <sizeBytesMin>1073741824</sizeBytesMin>
            </image>
        </nand>
    </package>
</packageFile>
и то это при условии что в прошивке новый реалтековский install_а
на обычной айконбитовской прошивке с принудиловом установкой бута и с айконским install_а вообще строка install_bootloader>y</install_bootloader> ненужна главно чтобы была строка
Code: Select all
<image type="bootloader" force="yes">
:
configuration_iconbit_repair_boot | +
Code: Select all
<?xml version="1.0" encoding="ISO-8859-1" ?>
<packageFile>
    <info>
        <company>Realtek Semiconductor Corp.</company>
        <description>This image file contains 3 Jupiter packages. The first one is for AVHDD on NOR, the second one is for AVHDD on NAND, and the third one is for AVHDD on ISO image.</description>
        <version>v10.1.1.r10221</version>
        <releaseDate>03/25/13 16:57</releaseDate>
        <signature>Saturn image files</signature>
    </info>
    <installerAP>
        <fileName>install_a</fileName>
    </installerAP>
    <package>
        <info>
            <description>This is Android on NAND of Saturn</description>
            <version>N/A</version>
        </info>
        <nand>
            <image type="yaffs2" userDefined="y">
                <fileName />
                <mountPoint>cache</mountPoint>
                <sizeBytesMin>52428800</sizeBytesMin>
            </image>
            <image type="linuxKernel">
                <fileName>package5/vmlinux.develop.android.saturn.nand.bin</fileName>
                <targetAddress>0x80100000</targetAddress>
                <version>SVN:10221</version>
            </image>
            <image type="audioKernel">
                <fileName>package5/bluecore.audio</fileName>
                <targetAddress>0x81b00000</targetAddress>
                <version>N/A</version>
            </image>
            <image type="videoKernel">
                <fileName>package5/video_firmware.bin</fileName>
                <targetAddress>0x81d80000</targetAddress>
                <version>N/A</version>
            </image>
            <image type="bootloader" force="yes">
                <fileName>package5/bootloader.tar</fileName>
                <version>N/A</version>
            </image>
            <image type="squash">
                <fileName>package5/squashfs1.img</fileName>
                <mountPoint>/</mountPoint>
            </image>
            <image type="yaffs2">
                <fileName>package5/yaffs2_2.img</fileName>
                <mountPoint>/usr/local/etc</mountPoint>
                <sizeBytesMin>0</sizeBytesMin>
            </image>
        </nand>
    </package>
</packageFile>
можешь скачать и посмотреть http://files.iconbit.ru/MEDIAPLAYER/XDS1003D/bootloader/boot_xds1003d.zip (правда не сегодня у них сервер лежит)
Saturn: iconBIT XDS73d mk2(inext_hd1_225_r0)
Android tv box: Tox1, 2 * X3 Cube
User avatar
maximen
 
Posts: 771
Joined: 21 Feb 2012, 16:07
Location: Донбасс

Re: Как восстановить после неудачной прошивки.

Postby HiHat » 09 Dec 2013, 00:58

Alexsys wrote:Вот лог установки родной прошивки от Iconbit
Как сменить логотип с Egreat на родной Iconbit?

maximen wrote:Держи полную прошивку для XDS4403D с принудительной установкой буткода
Download:repair_boot_frw_XDS440_3D_(14.05.12)

Т.е. речь шла о проблеме с установкой родной прошивки Iconbit.
При чем тут Inext?!
Далее, если поискать строку "install_bootloader" в установщике XDS440 (install_a), то станет ясно, что ее там нет, хотя строка "install_boot" там присутствует.
Спрашивается, зачем установщику Iconbit подсовывать конфиг от Inext, который он не понимает?
Egreat R6S (512Mb flash,100Mbit LAN) - Inext 2.14 Mos r0 (by FarVoice)
HiHat
 
Posts: 108
Joined: 23 Dec 2012, 17:36
Location: Москва

Re: Как восстановить после неудачной прошивки.

Postby maximen » 09 Dec 2013, 01:04

HiHat
Где строка "install_boot" покажи хоть одну оф прошивку я разберу и посмотрю с оф сайта конечно
Используется bootloader а не boot и package_MP.tar (на плеерах 400-500 мегагерц)

Alexsys
Пробуй repair_boot_frw_XDS440_3D_(14.05.12)

Когда сменится лого и тп... то выключаешь плеер, форматируй флешку компом в ext3 и подключай к плееру, после полной загрузки заходи в инет сервисы и обновляй модули это есть в инструкции к 2.02_RU описано в пункте 1.5.
Инструкцию скачаешь когда сайт айконбита заработает
Last edited by maximen on 25 Dec 2013, 01:49, edited 1 time in total.
Saturn: iconBIT XDS73d mk2(inext_hd1_225_r0)
Android tv box: Tox1, 2 * X3 Cube
User avatar
maximen
 
Posts: 771
Joined: 21 Feb 2012, 16:07
Location: Донбасс

Re: Как восстановить после неудачной прошивки.

Postby Virtual » 09 Dec 2013, 14:47

всем кто тут ломает копья... как восстановить родной бут...
Модифицированная прошивка от iNexT HD (1186)
второе сообщение!., что блин так сложно найти?
марсы: HDS7 (смотрелка AMP скин vrt )
HDR12 AMP (обычно сервер с RAM 256 и 2 SATA диска 2T+)//но очень иногда оцифровка видео
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.90 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6862
Joined: 01 Oct 2010, 17:17
Location: RU

PreviousNext

Return to Hardware

Who is online

Users browsing this forum: No registered users and 13 guests