Bricked IcyBox MP305 RTD1083 chiptec

Bricked IcyBox MP305 RTD1083 chiptec

Postby slack » 16 Jun 2011, 03:09

Hi there.

I have a raidsonic icybox mp305 much similar to emtec n200 and asus oplay (same chiptec).

Tried to flash my icybox with the latest firmware available on the vendor website and it bricked my box. It can't boot from usb, tried alot of times to restore fw from usb-disk or sd-card holding down power button method and no go.

After that, I tried to access box by telnet like described in many websites but no success too, so opened my box and connected RS232 usb to serial cable directly to the PCB, I can now access the box with putty by serial connection, I see that my box is booting to a kernel rescue partition and it doesn't detect any usb-device (that's the reason why it should not be able to restore fw with the hold power button method), with this rescue boot there's no ethernet access too so I cannot transfer firmware by network.

Anyone here already recovered from this?

Thanks alot.
slack
 
Posts: 5
Joined: 16 Jun 2011, 03:05

Re: Bricked IcyBox MP305 RTD1083 chiptec

Postby Lossless » 16 Jun 2011, 06:51

Hi!
Please, attach zipped putty logs to your message.
Xtreamer Prodigy (X3D_4.00_r0)
User avatar
Lossless
 
Posts: 358
Joined: 20 Oct 2010, 11:12
Location: Russia

Re: Bricked IcyBox MP305 RTD1083 chiptec

Postby slack » 17 Jun 2011, 03:35

Hi there.

Just posted everything @ minimodding including logs:

http://minimodding.com/tiki-view_forum_ ... forumId=24

Thanks alot!
slack
 
Posts: 5
Joined: 16 Jun 2011, 03:05

Re: Bricked IcyBox MP305 RTD1083 chiptec

Postby Virtual » 17 Jun 2011, 04:42

slack wrote:Hi there.

Just posted everything @ minimodding including logs:

http://minimodding.com/tiki-view_forum_ ... forumId=24

Thanks alot!

Check up a voltage on USB
марсы: HDS7 (смотрелка AMP скин vrt )
HDR12 AMP (обычно сервер с RAM 256 и 2 SATA диска 2T+)//но очень иногда оцифровка видео
XTR PRO(AMP, HTTP(S) NFS SMB FTP сервер +trans2.90 + 2 SATA диска 2T+
сатурны: XTR Prodigy, R6S(512Mb_NAND), HD900A(_MD*) прошивка
User avatar
Virtual
 
Posts: 6862
Joined: 01 Oct 2010, 17:17
Location: RU

Re: Bricked IcyBox MP305 RTD1083 chiptec

Postby Lossless » 17 Jun 2011, 07:29

slack wrote:Hi there.

Just posted everything @ minimodding including logs:

http://minimodding.com/tiki-view_forum_ ... forumId=24

Thanks alot!


First check internal wires in box.
Do you have USB hub with AC power adapter? If yes - try using it
Judging by the logs - you have a hardware problem...
Xtreamer Prodigy (X3D_4.00_r0)
User avatar
Lossless
 
Posts: 358
Joined: 20 Oct 2010, 11:12
Location: Russia

Re: Bricked IcyBox MP305 RTD1083 chiptec

Postby slack » 17 Jun 2011, 15:46

Lossless wrote:
slack wrote:Hi there.

Just posted everything @ minimodding including logs:

http://minimodding.com/tiki-view_forum_ ... forumId=24

Thanks alot!


First check internal wires in box.
Do you have USB hub with AC power adapter? If yes - try using it
Judging by the logs - you have a hardware problem...


Good point, will try that.

About hardware problem, it's strange because before this fw update problem all was working fine, can't believe that hw problem was caused by fw/sw change. :?

Best regards and thanks for the help.
slack
 
Posts: 5
Joined: 16 Jun 2011, 03:05

Re: Bricked IcyBox MP305 RTD1083 chiptec

Postby slack » 18 Jun 2011, 19:46

So tested it with an usb hub external powered like suggested but no go, same boot log and can't mount usb... don't know what more can I do... any ideas?

Thanks alot.
slack
 
Posts: 5
Joined: 16 Jun 2011, 03:05

Re: Bricked IcyBox MP305 RTD1083 chiptec

Postby Lossless » 21 Jun 2011, 07:49

Insert SD-card in cardreader. Will there be changes in the log?
Xtreamer Prodigy (X3D_4.00_r0)
User avatar
Lossless
 
Posts: 358
Joined: 20 Oct 2010, 11:12
Location: Russia

Re: Bricked IcyBox MP305 RTD1083 chiptec

Postby slack » 21 Jun 2011, 17:53

Already did that but nothing changed. :(

Tried another method like described here:

http://minimodding.com/tiki-view_forum_ ... entId=1492

I'm almost sure after reading patriot box office forums that what happened with me was fw update with an older bootcode, it seems that fw available on icybox website only works with latest bootcode and my box probably still had an older one... result was a bricked box... anyway after update bootcode to the one provided in PBO forums I'm still getting same error msg on boot, can't mount usb devices... :(

Best regards
slack
 
Posts: 5
Joined: 16 Jun 2011, 03:05


Return to Other

Who is online

Users browsing this forum: No registered users and 5 guests

cron