Page 2 of 3

Re: Soft "Reset" for players with bootcode 17 and earlier

PostPosted: 16 Apr 2011, 07:18
by FarVoice
Nothing inserted between " " is not necessary. That's right - eight spaces. While one is enough :)

Re: Soft "Reset" for players with bootcode 17 and earlier

PostPosted: 20 Apr 2011, 12:32
by eranyanay
MadWhack wrote:Alright so I figured it out. For noobs like me, here's a step by step.

1. Download/Install putty (A telnet client)
2. Connect to your device using putty (you can find you device IP in setup->Network->Network Info). You should only need to enter the IP.
3. It'll ask you for a user name, type root
4. Type in the command listed in the first post, insert your device local IP in between the " symbols.
5. Turn off the device, plug in the USB stick with the FW update, turn on and wait. It takes about 2-3 minutes to install.

Voila.

FYI I used this on a Oplay R1


I wanted to change my fw on my Air R3 device, but its over 7minutes and still I see the start message "Preparing for update. It takes a few seconds",
Im afraid it takes too long. Is it going to brick? Is there anything I can do?
I tried that method after I had rev4 on my device but WIFI wasnt working properly, so I thought of downgrading it to rev3.2
at the moment..I think no-wifi is better than no-oplay...:|

Re: Soft "Reset" for players with bootcode 17 and earlier

PostPosted: 20 Apr 2011, 15:13
by FarVoice
to eranyanay:
maybe your flash stick is broken? Format you USB drive to FAT32 , copy image file and try reflash again through Reset button.

Re: Soft "Reset" for players with bootcode 17 and earlier

PostPosted: 20 Apr 2011, 15:51
by eranyanay
Thank you for your help.
Eventually, multiple and long pressing the reset button helped and now it works again

Re: Soft "Reset" for players with bootcode 17 and earlier

PostPosted: 12 Feb 2012, 00:01
by andy78
@FarVoice
Can this trick be done on Xtreamer players (Ixtreamer, XtreamerDVD, XtrPRO) ?

Re: Soft "Reset" for players with bootcode 17 and earlier

PostPosted: 12 Feb 2012, 08:36
by FarVoice
andy78 wrote:@FarVoice
Can this trick be done on Xtreamer players (Ixtreamer, XtreamerDVD, XtrPRO) ?

Yep. It's work on any RTL players. But on xTreamers I would advise "three magic buttons" Power - 3 - home

Re: Soft "Reset" for players with bootcode 17 and earlier

PostPosted: 12 Feb 2012, 14:06
by andy78
thx FarVoice
Some people reported that AMP can not be loaded through "Power - 3 - home", while original firmware is loaded without any hassle. Is this the right cure for such an issue?

Re: Soft "Reset" for players with bootcode 17 and earlier

PostPosted: 12 Feb 2012, 14:24
by FarVoice
andy78 wrote:thx FarVoice
Some people reported that AMP can not be loaded through "Power - 3 - home", while original firmware is loaded without any hassle. Is this the right cure for such an issue?

just remane install.img to name of original FW image. For example, on xTreamer Pro image's name is install_pro.img - see emergency firmware.

Re: Soft "Reset" for players with bootcode 17 and earlier

PostPosted: 12 Feb 2012, 15:19
by andy78
We are talking about AMP on another forum
http://hdtvpolska.com/topic/22143-xtrea ... _p__268718
Image file is changed according to xtreamer model but still the same.
Some people reported success but others have problem with the update.
May this be related to wrong bootloader? Any idea how to check bootloader?

Re: Soft "Reset" for players with bootcode 17 and earlier

PostPosted: 12 Feb 2012, 15:29
by FarVoice
andy78 wrote:We are talking about AMP on another forum
http://hdtvpolska.com/topic/22143-xtrea ... _p__268718
Image file is changed according to xtreamer model but still the same.
Some people reported success but others have problem with the update.
May this be related to wrong bootloader? Any idea how to check bootloader?

Nop. Bootloader on all xTreamers is the same - 14
Just repeat press several times "magic buttons" as a mantra "Home - 3 - Power" and again, and again...