Beta from HD2 - for englishmen

[FarVoice]

Eric is right.
ftp user disable for login. See x in password field
ftp:x:14:50:FTP User:/tmp/ramfs/nas-volumes/:/bin/sh

But it uses as default user for anonymous access

[sansu]

Thanks Guys. I will give it a try. I really appreciate your help.

[robert]

Most likely you have bootcode 17 or below, and you have installed the HD2 beta by substitution. Reflash with a clean memory (http://www.moservices.org/forum/viewtopic.php?f=12&t=88)

Hi Farvoice

I used the code provided by you and used the "reboot" command to reboot the unit. The unit restarted and installed the HD2 beta firmware without any problem. Thank you very much.
But the NAS is still not working. this time I saw the SAMBA is on in the NAS menu under Home. But from a Windows XP, I type the Unit ip, there is no external disk show up that attached to the unit.
Would you please give any advice?

Thanks.
Robert

[Vulcan]

Hi Guys,

Excelent work, Jarre and Farvoice!! You Rule!

I've been trying this Beta and it's a charm. Samba works and the new interface is beautiful.

The only thing anoying me now, it that Bit Torrent Client doesn't work: I've enabled "BT Download" at NAS, I've gone to the Web interface to add torrents, but each time I add a new torrent (add a new job) my browser just stays blank and that torrent never appears at BT Info.

When I run a dmesg at the telnet console after adding torrents in the web site, I get :

==========================================================
do_page_fault() #1: sending SIGSEGV to bt_manager.cgi for invalid read access fr
om
323db7a6 (epc == 2acf99ac, ra == 2acf9748)
==========================================================

Can you help me? I'm running Farvoice's file, since my bootcode is the 17 one...

Cheers,
Vulcan

[snuif]

Hello ,

this stuff is totaly new for me, how can i put this firmware on my O!Play HD2.

By telnet or with USB stick, i want to try it but don't know how.

THANKS, for any good answer.

Greetz SNUIF (Netherlands)

[FarVoice]

this stuff is totaly new for me, how can i put this firmware on my O!Play HD2.

As usual - copy install.img to USB stick, put it to player, unplug power, press RESET button, plug power.

[snuif]

this stuff is totaly new for me, how can i put this firmware on my O!Play HD2.

As usual - copy install.img to USB stick, put it to player, unplug power, press RESET button, plug power.

Thanks FarVoice, for the quick reply.
I will start in an hour and let you hear my experience with this work.

Again THANKS

[snuif]

Hello,

I tried it, the only thing that happend "Preparing for Update, it takes a few seconds" is on the screen and thats all.
If i restart the player everything is the same and nothing changed.

That's all.............

[FarVoice]

what image you put on a flash drive?

[Jon Jon]

Hello ,

this stuff is totaly new for me, how can i put this firmware on my O!Play HD2.

More easy, menu, install Fw, play cancel, and taht´s all it will be start.
Be sure your bootcode is higer than 18, mine was bricked , but tomorrow i will have a new one by SAT